AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Cynnyrch Drosview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Nodweddion Allweddol:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Mynediad Amlgyfrwng: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. manylebau

3. Canllaw Gosod

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Dadbacio

1. Tynnwch gas y cyfrifiadur personol o'i becynnu yn ofalus.
2. Remove any protective films or internal packaging materials.
3. Rhowch y cas ar arwyneb sefydlog, gwastad.

3.2 Gosod Motherboard

1. Remove the tempered glass side panel by unscrewing the thumb screws.
2. Gosodwch y darian I/O (os nad yw wedi'i gosod ymlaen llaw ar eich mamfwrdd) yn agoriad cefn y cas.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Sicrhewch y famfwrdd gan ddefnyddio'r sgriwiau a ddarperir.

3.3 Gosod Cyflenwad Pŵer

1. Lleolwch yr ardal mowntio cyflenwad pŵer ar waelod cefn y cas.
2. Slide your power supply unit (PSU) into the designated bay.
3. Sicrhewch y PSU gyda sgriwiau o gefn y cas.

3.4 Gosod Gyriant Storio

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Expansion Card (GPU) Installation

1. Tynnwch y gorchuddion slot ehangu angenrheidiol o gefn y cas.
2. Mewnosodwch eich cerdyn graffeg neu gardiau ehangu eraill i mewn i'r slotiau PCIe ar eich mamfwrdd.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 System Oeri

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Rheoli Ceblau

Defnyddiwch y toriadau llwybro ceblau a'r pwyntiau clymu y tu ôl i hambwrdd y famfwrdd i drefnu ceblau. Mae hyn yn gwella llif aer ac estheteg.

4. Cyfarwyddiadau Gweithredu

4.1 Pweru Ymlaen/Diffodd

• To power on your PC, press the Grym button located on the top panel.
• To power off, either shut down through your operating system or press and hold the Grym botwm am ychydig eiliadau.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• Porthladd USB 3.0 (x1): Ar gyfer trosglwyddo data cyflym.
• Porthladdoedd USB 2.0 (x2): Ar gyfer cysylltu perifferolion.
• Jack Meicroffon: Ar gyfer mewnbwn sain.
• HD Audio Jack: For audio output (headphones/speakers).
• Botwm Ailosod: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. cynnal

Mae cynnal a chadw rheolaidd yn helpu i sicrhau perfformiad a hirhoedledd gorau posibl cydrannau eich cyfrifiadur personol.

5.1 Glanhau'r Hidlydd Llwch

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Glanhau Cyffredinol

• Sychwch du allan y cas gyda lliain meddal, damp brethyn. Osgoi glanhawyr sgraffiniol.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Datrys Problemau

Os byddwch chi'n dod ar draws problemau gyda chas eich cyfrifiadur personol, ystyriwch y camau datrys problemau cyffredin canlynol:

• Dim pŵer: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Ffanau Ddim yn Troelli/RGB Ddim yn Gweithio: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Gorboethi: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Front Panel Ports Not Working: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Gwarant a Chefnogaeth

7.1 Gwybodaeth Gwarant

The AeroCool HEXFORMBKV2 PC case comes with a Gwarant 2 mlynedd for parts. Please retain your proof of purchase for warranty claims.

7.2 Cefnogaeth Dechnegol

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's websafle neu yn y pecyn cynnyrch.

• AeroCool Official Websafle: www.aerocool.io
• E-bost Cymorth i Gwsmeriaid: support@aerocool.io (example, please verify on official websafle)