ABB AD1NO-R-15m Modular Device Switch User Manual

1. Rhagymadrodd

The ABB AD1NO-R-15m is an analog time switch designed for daily scheduling with a 15-minute switching interval. This modular device features one normally open (NO) channel and includes a power reserve function to maintain timekeeping during power outages. It is suitable for various electrical scheduling applications.

Ffigur 1: Blaen view of the ABB AD1NO-R-15m Modular Device Switch, highlighting its compact design and control interface.

2. Cyfarwyddiadau Diogelwch Pwysig

Please read and understand all safety instructions before installing, operating, or maintaining this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Dim ond personél cymwys all gyflawni'r gosodiad a'r gwaith cynnal a chadw.
• Disconnect power before installation, maintenance, or servicing to prevent electric shock.
• Sicrhewch fod yr holl weirio yn cydymffurfio â chodau a rheoliadau trydanol lleol a chenedlaethol.
• Peidiwch â gweithredu'r ddyfais os yw'n ymddangos ei bod wedi'i difrodi.
• This device is designed for indoor use in dry environments.

3. Cynnyrch Drosview

The AD1NO-R-15m is an analog time switch with the following key features:

• Deialu Analog: For setting daily schedules.
• 15-Minute Switching: Allows precise control over connected circuits with 15-minute intervals.
• 1 Normally Open (NO) Channel: Controls one electrical circuit.
• Cronfa Bwer: Maintains timekeeping for a specified duration during power interruptions.
• Dyluniad modiwlaidd: Suitable for integration into standard electrical panels on a DIN rail.

Note: The power reserve ensures the timer continues to function accurately even if the main power supply is temporarily lost.

4. Gosod a Gosod

Follow these steps for proper installation of the AD1NO-R-15m Modular Device Switch:

1. Datgysylltu Pŵer: Before beginning, ensure the main power supply to the installation area is completely disconnected at the circuit breaker or fuse box. Verify with a voltage profwr.
2. Mowntio: Mount the AD1NO-R-15m switch onto a standard DIN rail within an appropriate electrical enclosure. Ensure it is securely fastened.
3. Gwifrau:
   • Connect the incoming phase (L) and neutral (N) wires to the designated input terminals of the time switch.
   • Connect the load wire from the output terminal of the time switch to the device you wish to control.
   • Ensure all connections are tight and secure. Refer to the wiring diagram printed on the device for specific terminal identification.
4. Adfer pŵer: Once all connections are verified and secure, close the electrical enclosure and restore power to the circuit.

Always consult a qualified electrician for installation if you are unsure or lack experience with electrical wiring.

5. Cyfarwyddiadau Gweithredu

To set the time and program the switching schedule:

1. Gosod Amser Presennol: Rotate the analog dial clockwise until the current time aligns precisely with the reference arrow or marker on the device's face.
2. Program Switching Times: The dial features small segments around its perimeter. Push in the segments corresponding to the times you want the connected circuit to be ON. Pull out segments for OFF periods. Each segment typically represents a 15-minute interval.
3. Operating Mode (if applicable): If your model includes a manual override switch (e.g., ON, AUTO, OFF), ensure it is set to "AUTO" for programmed operation.

The internal power reserve will automatically charge when the device is powered, ensuring continued accurate timekeeping during short power outages.

6. cynnal

The AD1NO-R-15m is designed for minimal maintenance. Follow these guidelines to ensure optimal performance:

• Glanhau: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners, abrasive materials, or solvents.
• Arolygiad: Periodically inspect the wiring connections for tightness and any signs of wear, corrosion, or damage. Ensure all terminals are secure.
• Amodau Amgylcheddol: Sicrhewch fod yr amgylchedd gweithredu yn aros o fewn yr ystodau tymheredd a lleithder penodedig i atal difrod.

There are no user-serviceable parts inside this device. Do not attempt to open the casing, as this will void the warranty and may expose you to electrical hazards.

7. Datrys Problemau

If you encounter issues with your AD1NO-R-15m switch, refer to the table below for common problems and solutions:

If the problem persists after attempting these solutions, please contact ABB customer support for further assistance.

8. Manylebau Technegol

• Model: AD1NO-R-15m
• Rhif Rhan: 2CSM222461R1000
• Gwneuthurwr: FFIG
• Math: Newid Amser Analog
• Switching Interval: 15 munud
• Sianeli: 1 Ar agor fel rheol (NA)
• Cronfa Bwer: Oes
• Pwysau Eitem: Tua 2.82 owns (80 gram)
• Dimensiynau Cynnyrch: Tua 3.54 x 0.69 x 2.6 modfedd (90 x 17.5 x 66 mm)
• Math Mowntio: DIN Rail (Wall Mount)
• Cydrannau wedi'u Cynnwys: Modular device switch
• Batris Angenrheidiol: No (features internal power reserve)
• ASIN: B09BP4PFMF
• Ar Gael Cyntaf: Rhagfyr 21, 2024

Sylwer: Gall manylebau newid heb rybudd ymlaen llaw.

9. Gwarant a Chefnogaeth

Gwybodaeth Gwarant

For detailed warranty terms and conditions, please refer to the official ABB warranty statement provided with your purchase or visit the official ABB websafle. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.

Cefnogaeth i Gwsmeriaid

For technical assistance, troubleshooting, or service inquiries, please contact ABB customer support through their official websafle neu'r wybodaeth gyswllt a ddarperir yn eich pecynnu cynnyrch.

Swyddog ABB Websafle: www.abb.com