DJI FPV Goggles V2 User Manual

1. Rhagymadrodd

The DJI FPV Goggles V2 are designed to provide an immersive first-person view experience for drone racing and FPV flight. These goggles feature high-resolution displays, low-latency video transmission, and a comfortable design, making them an essential component for advanced drone piloting.

Ffigur 1.1: Prif view of the DJI FPV Goggles V2.

2. Beth sydd yn y Bocs

Upon unboxing your DJI FPV Goggles V2, ensure all the following components are present:

• Goggles DJI FPV V2
• Power Cable (XT60 to barrel plug) - Note: Some packages may not include this cable.
• Strap Pen
• Cebl USB-C
• Antennas (4x)
• Batri Goggles

3. Gwybodaeth Diogelwch

Before operating the DJI FPV Goggles V2, please read and understand the following safety guidelines to ensure safe and proper use:

• Always operate the goggles in a safe environment, away from obstacles and people.
• Ensure the battery is fully charged and properly connected before use.
• Avoid prolonged exposure to direct sunlight on the goggle lenses, as this can damage the internal screens.
• Do not disassemble or modify the goggles, as this will void the warranty and may cause damage.
• Keep the goggles away from water and moisture.
• Use only official DJI accessories and replacement parts.

4. Cydrannau Drosview

Familiarize yourself with the various components and their functions on your DJI FPV Goggles V2.

4.1 Blaen View

Figure 4.1.1: The front of the goggles, showing the four antenna ports for optimal signal reception.

4.2 Y tu mewn View (Lenses)

Ffigur 4.2.1: Y mewnol view of the goggles, displaying the high-resolution screens and adjustable lenses for clear vision.

4.3 Ochr View gyda Phorthladdoedd

Ffigur 4.3.1: Ochr view showing the USB-C port for data transfer and charging, and the MicroSD card slot for recording flight footage.

4.4 Other Side View

Figure 4.4.1: The opposite side view of the goggles, showing the strap attachment point and overall profile.

4.5 Uchaf View

Ffigur 4.5.1: Uchaf view of the goggles, illustrating the overall ergonomic design and strap attachment points.

4.6 Gwaelod View

Ffigur 4.6.1: Y gwaelod view of the goggles, showing ventilation and additional structural details.

4.7 Rheolaethau a Dangosyddion

The goggles feature intuitive controls and indicators for easy operation:

• Botwm Pŵer: Located on the side, used to power the goggles on/off.
• Botwm Cofnodi: Initiates and stops video recording to the MicroSD card.
• Botwm Cefn: Navigates back through menus.
• Botwm 5D: Multi-directional button for menu navigation and selection.
• Dangosydd Statws LED: Provides visual feedback on power status, recording, and errors.

Ffigur 4.7.1: O'r brig i lawr view highlighting the control buttons and indicator lights on the goggles.

5. Gosod

Follow these steps for the initial setup of your DJI FPV Goggles V2:

1. Gwefru'r Batri: Connect the provided battery to a power source using the USB-C cable. Ensure the battery is fully charged before first use.
2. Atodwch Antenâu: Screw the four antennas firmly into their respective ports on the front of the goggles.
3. Install Head Strap: Attach the head strap to the designated clips on the sides and top of the goggles. Adjust for a comfortable and secure fit.
4. Mewnosod Cerdyn MicroSD (Dewisol): If you plan to record footage, insert a compatible MicroSD card into the slot on the side of the goggles.
5. Pŵer Ymlaen: Press and hold the power button on the goggles until the indicator light illuminates and you hear a startup sound.
6. Rhwymo: Follow the instructions in your drone's manual to bind the goggles to your DJI FPV drone or air unit. This typically involves pressing a bind button on both devices.

6. Gweithredu

Once set up, operating your DJI FPV Goggles V2 is straightforward:

1. Wearing the Goggles: Place the goggles over your eyes and adjust the head strap for a snug fit that blocks out external light. Ensure the lenses are aligned with your eyes.
2. Addasu Ffocws: Use the diopter adjustment sliders (if present, or adjust the position of the goggles on your face) to achieve a clear image.
3. Llywio Dewislen: Use the 5D button to navigate through the on-screen display (OSD) menus. Press the button to select an option, and use the Back button to return.
4. Recordio Footage: Press the Record button once to start recording. The indicator light will change to red. Press it again to stop recording.
5. ViewFfrwd Fyw: After binding, the live video feed from your drone will automatically appear on the goggle screens.

7. cynnal

Proper maintenance ensures the longevity and optimal performance of your goggles:

• Glanhau Lensys: Use a soft, lint-free cloth specifically designed for optical lenses to gently wipe the goggle screens. Do not use abrasive materials or chemical cleaners.
• Glanhau Allanol: Wipe the exterior of the goggles with a clean, damp brethyn.
• Storio: Store the goggles in a cool, dry place, away from direct sunlight and extreme temperatures. Use the original packaging or a protective case to prevent dust and scratches.
• Gofal Batri: If storing for extended periods, ensure the battery is charged to approximately 50-60% to maintain battery health.

8. Datrys Problemau

Cyfeiriwch at y problemau cyffredin canlynol a'u datrysiadau:

9. manylebau

Key technical specifications for the DJI FPV Goggles V2:

10. Gwarant a Chefnogaeth

Am wybodaeth fanwl am warant a chymorth technegol, cyfeiriwch at y DJI swyddogol website or the comprehensive user guide provided by the manufacturer.

You can access the official User Guide (PDF) yma.