Behringer RX1202FX V2 12-Channel Analog Mixer with FX

Rhagymadrodd

The Behringer RX1202FX V2 is a premium 12-input microphone/line mixer designed for professional audio applications. This 3U rack-mountable analog mixer offers ultra-low noise operation and versatile connectivity for various audio setups. It features high-quality XENYX microphone preamps, a warm 2-band 'British' EQ on each channel, and a studio-grade 24-bit multi-FX processor with 100 presets including reverb, chorus, flanger, delay, and pitch shifter.

This manual provides essential information for the safe and efficient operation of your RX1202FX V2 mixer. Please read it thoroughly before use and retain it for future reference.

Cyfarwyddiadau Diogelwch Pwysig

RHYBUDD: To reduce the risk of electric shock, do not expose this appliance to rain or moisture. Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

• Darllenwch y cyfarwyddiadau hyn.
• Cadwch y cyfarwyddiadau hyn.
• Gwrandewch ar bob rhybudd.
• Dilynwch yr holl gyfarwyddiadau.
• Peidiwch â defnyddio'r offer hwn ger dŵr.
• Glanhewch â brethyn sych yn unig.
• Peidiwch â rhwystro unrhyw agoriadau awyru. Gosod yn unol â chyfarwyddiadau'r gwneuthurwr.
• Peidiwch â gosod yn agos at unrhyw ffynonellau gwres fel rheiddiaduron, cofrestrau gwres, stofiau, neu gyfarpar arall (gan gynnwys amplifyddion) sy'n cynhyrchu gwres.
• Peidiwch â threchu pwrpas diogelwch y plwg polariaidd neu'r math o sylfaen. Mae gan blwg polariaidd ddau lafn gydag un yn lletach na'r llall. Mae gan blwg math sylfaen ddau lafn a thrydydd prong sylfaen. Darperir y llafn llydan neu'r trydydd prong er eich diogelwch. Os nad yw'r plwg a ddarperir yn ffitio i mewn i'ch allfa, ymgynghorwch â thrydanwr i gael gwared ar yr allfa ddarfodedig.
• Amddiffynnwch y llinyn pŵer rhag cael ei gerdded ymlaen neu ei binsio yn enwedig wrth blygiau, cynwysyddion cyfleustra, a'r pwynt lle maent yn gadael y cyfarpar.
Defnyddiwch atodiadau/ategolion a nodir gan y gwneuthurwr yn unig.
• Tynnwch y plwg o'r cyfarpar hwn yn ystod stormydd mellt neu pan na chaiff ei ddefnyddio am gyfnodau hir o amser.
• Cyfeirio pob gwasanaeth i bersonél gwasanaeth cymwys. Mae angen gwasanaethu pan fydd y cyfarpar wedi'i ddifrodi mewn unrhyw ffordd, fel llinyn cyflenwad pŵer neu blwg wedi'i ddifrodi, hylif wedi'i ollwng neu wrthrychau wedi disgyn i'r offer, mae'r cyfarpar wedi bod yn agored i law neu leithder, nid yw'n gweithredu'n normal , neu wedi cael ei ollwng.

Gosod

1. Dadbacio ac Arolygu

Carefully unpack your RX1202FX V2 mixer. Inspect the unit for any signs of damage that may have occurred during transit. Retain the packaging materials for future shipping or if the unit needs to be returned for service.

2. Mowntio Rack

The RX1202FX V2 is designed for standard 19-inch rack mounting, occupying 3U of rack space. Ensure adequate ventilation around the unit to prevent overheating. Do not block the ventilation openings.

3. Cysylltiad Pwer

Connect the supplied power cord to the AC/POWER inlet on the rear panel of the mixer and then to a suitable power outlet. Ensure the voltage matches the requirements specified on the unit. The mixer operates at 120 Volts.

4. Cysylltu Mewnbynnau

The RX1202FX V2 offers 12 input channels:

• Mewnbynnau Meicroffon (Sianeli 1-8): Use balanced XLR cables for connecting microphones. These channels feature XENYX preamps.
• Mewnbynnau Llinell (Sianeli 1-12): Use balanced 1/4" TRS or unbalanced 1/4" TS cables for connecting line-level sources such as keyboards, drum machines, or other audio devices. Channels 9-12 are stereo line inputs.
• Mewnbwn CD/Tâp: Connect external playback devices (e.g., CD player, media player) using RCA cables to the CD/TAPE IN jacks.

5. Cysylltu Allbynnau

• Prif Allbynnau: Connect your main PA system or recording interface to the MAIN OUT (XLR) jacks.
• Allbynnau Ystafell Reoli: Connect your studio monitors to the CTRL OUT (1/4" TRS) jacks.
• Allbwn clustffonau: Connect headphones to the PHONES (1/4" TRS) jack for monitoring.
• Anfoniadau Cymorth: Use the AUX SENDS (1/4" TS) to send signals to external effects processors or monitor mixes.
• Aux Returns: Connect the output of external effects processors to the AUX RETURNS (1/4" TS) jacks.

Delwedd: Rear panel of the Behringer RX1202FX V2 mixer. This view displays the AC power inlet, power switch, main XLR outputs, control room outputs, monitor outputs, CD/Tape inputs and outputs, Aux sends and returns, and the 8 XLR microphone inputs with corresponding 1/4" line inputs and inserts.

Cyfarwyddiadau Gweithredu

1. Pweru Ymlaen / I ffwrdd

After all connections are made, press the AC/POWER switch on the rear panel to turn the unit on. Always turn on your mixer before connecting power amplifiers or active speakers, and turn it off after them, to prevent loud thumps.

2. Channel Controls (Channels 1-12)

Delwedd: Front panel of the Behringer RX1202FX V2 mixer. This view highlights the individual channel strips with Gain, High EQ, Low EQ, MON (Monitor) send, FX send, PAN/BAL, and Level faders. The master section with the FX processor display, program knob, FX to Main/MON controls, CD/Tape controls, and Main Mix/Phones level controls is also visible.

• ENILL: Adjusts the input sensitivity for the microphone or line input. Use the CLIP LED as a guide; it should flash only occasionally on the loudest peaks.
• EQ UCHEL: Adjusts the high-frequency content of the channel.
• EQ ISEL: Adjusts the low-frequency content of the channel.
• MON (Monitor) Send: Controls the amount of signal sent to the monitor output. This is pre-fader.
• Anfon FX: Controls the amount of signal sent to the internal effects processor. This is post-fader.
• PAN/BAL: Pans the mono signal (channels 1-8) or balances the stereo signal (channels 9-12) across the stereo main mix.
• LEFEL Fader: Adjusts the overall output level of the channel to the main mix.
• LED CLIP: Illuminates when the input signal is too high, indicating potential distortion. Reduce the GAIN if this LED lights up frequently.

3. Phantom Power (+48V)

For condenser microphones, activate the +48V PHANTOM switch on the rear panel. Ensure microphones are connected before engaging phantom power to prevent damage.

4. FX Processor

The RX1202FX V2 includes a 24-bit multi-effects processor with 100 presets. Use the PROGRAM knob to select the desired effect. The FX TO MAIN and FX TO MON controls in the master section adjust the amount of the effect signal sent to the main mix and monitor mix, respectively.

5. Master Section Controls

• PRIF GYMMYSGEDD Fader: Yn rheoli lefel allbwn cyffredinol y prif gymysgedd stereo.
• PHONES/CTRL ROOM Level: Adjusts the output level for the headphones and control room outputs.
• CD/TAPE TO MAIN/CTRL ROOM: Buttons to route the CD/Tape input to the main mix or control room/phones output.

Cynnal a chadw

Glanhau

Regularly clean the exterior of the mixer with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish. Keep faders and knobs free from dust and debris.

Storio

When not in use for extended periods, store the mixer in a cool, dry environment, away from direct sunlight and extreme temperatures. If rack-mounted, ensure the rack provides adequate protection from dust and physical impact.

Datrys problemau

Manylebau

Gwarant

Behringer products, distributed by authorized MUSIC Tribe dealers, include a 3-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty information provided with your product or visit the official Behringer websafle.

Cefnogaeth

If you encounter issues not covered in the troubleshooting section, or require further assistance, please contact your authorized Behringer dealer or visit the official Behringer support website for up-to-date information, FAQs, and service contact details.