Laxre 4-in-1 Keyless Entry Smart Lock User Manual

1. Rhagymadrodd

This manual provides detailed instructions for the installation, operation, and maintenance of your Laxre 4-in-1 Keyless Entry Smart Lock. This smart lock offers multiple access methods including fingerprint, numeric code, mechanical key, and Bluetooth via a smartphone application, enhancing security and convenience for your home or office.

Figure 1: Laxre 4-in-1 Keyless Entry Smart Lock (Polished Brass)

2. Gwybodaeth Diogelwch

• Darllenwch yr holl gyfarwyddiadau yn ofalus cyn gosod a defnyddio.
• Do not expose the lock to direct water spray or immerse it in liquid.
• Use only the specified AAA alkaline batteries. Do not mix old and new batteries or different types of batteries.
• Keep mechanical keys in a safe location outside the property.
• Avoid exposing the lock to extreme temperatures or humidity.
• Peidiwch â cheisio dadosod na thrwsio'r clo eich hun. Cysylltwch â chymorth cwsmeriaid i gael cymorth.

3. Cynnwys Pecyn

Gwiriwch fod yr holl gydrannau yn bresennol cyn dechrau'r gosodiad:

• Exterior Handle Assembly with Keypad and Fingerprint Sensor
• Interior Handle Assembly
• Bollt clicied
• Plât Streic
• Sgriwiau Mowntio
• Allweddi Mecanyddol (2)
• Batris AAA (4)
• Templed Gosod
• Llawlyfr Defnyddiwr (y ddogfen hon)

Figure 2: Key features and components of the smart lock.

4. Gosod

The Laxre Smart Lock is designed for easy installation without the need for complex wiring or drilling, typically requiring only two screws to fasten. It is compatible with most standard doors, fitting both left and right-handed doors with a thickness range of 1.38 inches to 2 inches (35mm to 50mm).

4.1 Door Handing Adjustment

The lock can be adjusted for left or right-handed doors. Ensure the handle direction is correct before final installation.

Figure 3: Door handing adjustment for left and right open doors.

4.2 Camau Gosod

1. Paratowch y Drws: Ensure your door meets the thickness requirements (1.38" to 2"). Use the provided template to check existing boreholes and backset.
2. Gosodwch y Bolt Clicio: Insert the latch bolt into the door edge and secure it with screws. Ensure the latch is oriented correctly for your door's opening direction.
3. Install the Exterior Handle: Feed the cable from the exterior handle through the door hole. Align the exterior handle with the latch bolt and secure it.
4. Install the Interior Handle: Connect the cable from the exterior handle to the interior handle. Align the interior handle with the latch bolt and exterior handle, then secure it with the remaining screws.
5. Mewnosod Batris: Open the battery cover on the interior handle and insert the 4 AAA batteries.
6. Profwch y Clo: After installation, test all functions (mechanical key, keypad, fingerprint) to ensure proper operation before closing the door.

Figure 4: Installation diagram with dimensions.

5. Setup and Initial Programming

The Laxre Smart Lock uses the TTLock app for advanced features and management.

5.1 Lawrlwytho Ap a Pharu

1. Download the TTLock App: Chwiliwch am "TTLock" in your smartphone's app store (available for iOS and Android).
2. Creu Cyfrif: Follow the in-app instructions to register a new account.
3. Add Your Lock:
   • Galluogi Bluetooth ar eich ffôn clyfar.
   • Open the TTLock app and tap "Add Lock".
   • Select "Door Lock" and follow the prompts to find and pair your LAX-LA01PB lock. You may need to touch the keypad or press a button on the lock to activate it for pairing.

Figure 5: TTLock App overview.

5.2 Initial User Programming

Once paired, you can add your first fingerprint and user code via the app.

• Ychwanegu Olion Bysedd: In the app, navigate to "Fingerprints" and follow the instructions to register your fingerprint. You will typically need to place your finger on the sensor multiple times. The lock supports up to 100 fingerprints.
• Adding Passcodes: In the app, navigate to "Passcodes" to generate or set a custom numeric code. The lock supports up to 150 user codes.

6. Cyfarwyddiadau Gweithredu

6.1 Dulliau Datgloi

• Olion Bysedd: Place your registered finger on the fingerprint sensor. The lock will unlock in approximately 0.5 seconds if recognized.
• Numeric Code: Enter your registered passcode on the keypad, followed by the '#' key.
• Allwedd Mecanyddol: Insert the mechanical key into the keyhole located at the bottom of the exterior handle and turn to unlock. This is for emergency access or when batteries are depleted.
• Ap Bluetooth: Open the TTLock app, ensure you are within Bluetooth range, and tap the unlock icon.

Figure 6: Unlocking with fingerprint.

Figure 7: Unlocking with numeric code.

Figure 8: Unlocking with mechanical key.

6.2 Anti-Peep Passcode

To protect your passcode from being observed by others, you can enter random digits before or after your actual passcode. The lock will still recognize the correct sequence within the longer string of numbers.

Figure 9: Anti-peep passcode feature.

6.3 Cloi Awtomatig

The lock is designed to automatically lock after a set period once the door is closed. This feature can be configured within the TTLock app to ensure your door is always secured.

Figure 10: Automatic locking feature.

7. Rheoli Defnyddwyr

The TTLock app provides comprehensive tools for managing users and access permissions.

• Ychwanegu/Dileu Defnyddwyr: You can add or remove fingerprints and passcodes for various users directly through the app.
• Sharing eKeys: Grant temporary or permanent access to others by sending them an eKey via the app. This allows them to unlock the door using their own smartphone.
• Generating Passcodes: Create one-time, timed, or recurring passcodes for guests or service providers.
• Access Records: The app maintains a log of all lock and unlock events, including the method used (fingerprint, code, eKey) and the user.

Figure 11: Sending an eKey via the TTLock App.

Figure 12: Access records in the TTLock App.

8. cynnal

8.1 Batri Newydd

The lock is powered by 4 AAA alkaline batteries (included). Under normal usage, batteries can last up to 1 year. The lock will provide a low battery warning. Replace all four batteries simultaneously when indicated.

Ffigur 13: Dangosydd oes batri.

8.2 Glanhau

Wipe the lock's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and electronic components. Keep the fingerprint sensor clean for optimal performance.

9. Datrys Problemau

• Ôl bysedd heb ei adnabod: Ensure your finger is clean and dry. Re-register your fingerprint if issues persist. The sensor may have difficulty reading wet or sweaty fingers.
• Bysellfwrdd yn anymatebol: Check battery levels. If batteries are low, replace them. Ensure the keypad is clean.
• Problemau cysylltedd Bluetooth: Ensure your phone's Bluetooth is enabled and you are within close proximity (within 2 meters) of the lock. Try restarting the app or your phone's Bluetooth.
• Nid yw'r clo yn ymateb: If the lock is completely unresponsive, try replacing the batteries. If still unresponsive, use the mechanical key for access and contact customer support.
• Lock not suitable for outdoor exposure: This lock is not designed for direct exposure to rain or harsh weather conditions. Consider a storm door or protective cover if used in such environments.

10. manylebau

11. Gwarant a Chefnogaeth

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Laxre websafle. Cadwch eich derbynneb prynu fel prawf o brynu ar gyfer hawliadau gwarant.