BuTure BR600 Portable Car Jump Starter User Manual

1. Cynnyrch Drosview

The BuTure BR600 is a powerful and versatile portable car jump starter designed to provide emergency starting power for 12V vehicles. It also functions as a portable power bank with wireless charging capabilities and a multi-mode LED flashlight. This manual provides essential information for safe and effective use of your device.

Nodweddion Allweddol:

• Dechrau Neidio Pwerus: Delivers 2500A peak current to start all gasoline engines and up to 8.0L diesel engines.
• Batri Capasiti Uchel: 27000mAh lithium battery for multiple jump starts and device charging.
• Codi Tâl Di-wifr: Integrated 10W wireless charging pad for compatible smartphones.
• Banc pŵer cludadwy: Equipped with USB 1 (Quick Charge 3.0: 5V 3A / 9V 2A / 12V 1.5A), USB 2 (5V 2.4A), and USB-C (5V 3A) outputs for charging various electronic devices.
• Smart Protection Clamps: Features intelligent protection against short circuits, overheating, over-voltage, over-charge, deep discharge, over-current, and reverse polarity.
• Multi-mode LED Flashlight: Includes Flashlight, Strobe, SOS, and Warning Light modes for emergencies.
• Dyluniad Gwydn: Operates effectively in extreme temperatures, including cold winter conditions.

2. Cynnwys Pecyn

Gwiriwch gynnwys y pecyn wrth ei agor. Os oes unrhyw eitemau ar goll neu wedi'u difrodi, cysylltwch â chymorth cwsmeriaid.

Image: Contents of the BuTure BR600 package.

• 1 x BuTure BR600 Jump Starter
• 1 x Ceblau Siwmper Clyfar
• 1 x Cebl USB-C
• 1 x EC5 Cigarette Lighter Adapter
• 1 x Llawlyfr Defnyddiwr
• 1 x Achos Storio

3. Gwybodaeth Bwysig am Ddiogelwch

Read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Peidiwch â throchi'r cynnyrch mewn dŵr na'i amlygu i law.
• Do not open or disassemble the product. There are no user-serviceable parts inside.
• Cadwch allan o gyrraedd plant.
• Use only the provided smart jumper cables.
• Peidiwch â neidio cychwyn batri wedi'i rewi.
• Ensure proper polarity connection (red clamp i cadarnhaol, du clamp i negyddol).
• Peidiwch â chysylltu'r cl cadarnhaol a negyddolamps gyda'i gilydd.
• If the product becomes excessively hot during use, discontinue use immediately.
• Storiwch y cynnyrch mewn lle oer, sych i ffwrdd o olau haul uniongyrchol.
• Wear eye protection and gloves when jump starting a vehicle.
• Consult your vehicle's owner's manual for specific jump-starting procedures.

Image: The BuTure BR600 features multiple protection modes for safe operation, including error detection and intelligent indicators.

4. Charging the BuTure BR600

Before first use, fully charge the jump starter. It is recommended to recharge the device every 3-6 months to maintain battery health, even if not in use.

4.1. Charging via USB-C Input

1. Connect the provided USB-C cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB-C cable to a USB wall adapter (not included) or a car charger.
3. The LED indicator lights will illuminate and flash to show the charging status. All four lights will be solid when fully charged.

4.2. Dangosydd Lefel Batri

The LED indicator lights on the device show the remaining battery capacity:

• 4 golau: 75% - 100%
• 3 golau: 50% - 75%
• 2 golau: 25% - 50%
• 1 light: 0% - 25% (Recharge immediately)

Image: The BuTure BR600 features a 27000mAh battery designed for long standby times, up to 12 months.

5. Cychwyn Cerbyd gyda Neidio

Ensure the jump starter is at least 50% charged (2 LED lights) before attempting to jump start a vehicle.

1. Paratoi'r cerbyd: Turn off the vehicle's ignition and all accessories (headlights, radio, air conditioning, etc.). Engage the parking brake.
2. Connect Jumper Cables:
   • Insert the blue plug of the smart jumper cables into the 12V jump start port on the BuTure BR600. Ensure a firm connection.
   • Cysylltwch y COCH positif (+) clamp i derfynell batri positif (+) y cerbyd.
   • Cysylltwch y DUW cl negyddol (-)amp i derfynell batri negatif (-) y cerbyd.
   • Mae'r clamp indicator light will show the connection status. Refer to the smart clamp manual for specific light indications.
3. Cychwyn y cerbyd: Unwaith y bydd y cl clyfaramp indicator shows a safe connection, start your vehicle's engine. If the vehicle does not start immediately, wait 20-30 seconds before trying again. Do not crank the engine for more than 3 seconds per attempt.
4. Remove Jumper Cables: As soon as the vehicle starts, disconnect the DUW cl negyddol (-)amp yn gyntaf, yna y COCH positif (+) clamp from the vehicle battery. Finally, unplug the smart jumper cables from the BuTure BR600.

Pwysig: If the smart clamp indicates an error (e.g., reverse polarity), correct the connection before attempting to start the vehicle.

Image: Illustration of connecting the BuTure BR600 to a car battery for jump starting.

Image: Step-by-step guide showing how to connect the jump starter to the vehicle battery and then start the vehicle.

Image: The BuTure BR600 is designed to perform reliably even in cold winter temperatures down to -20°C.

6. Operating Other Functions

6.1. Defnyddio fel Banc Pŵer (Allbwn USB)

The BuTure BR600 can charge various electronic devices via its USB output ports.

• Connect your device's USB charging cable to either the USB 1 (Quick Charge 3.0) or USB 2 port on the jump starter.
• Bydd y cychwynnydd neidio yn dechrau gwefru'ch dyfais yn awtomatig.

6.2. Codi Tâl Di-wifr

For devices compatible with 10W wireless charging:

• Place your wireless charging compatible device (e.g., smartphone) on the wireless charging pad located on the top surface of the jump starter.
• Gwnewch yn siŵr bod y ddyfais wedi'i chanoli ar y pad i gael y gwefru gorau posibl.
• The wireless charging indicator light will illuminate to confirm charging is active.

Image: The BuTure BR600 offers both 10W wireless charging and Quick Charge 3.0 USB output for multiple devices.

6.3. Flashlight LED

The built-in LED flashlight has multiple modes for different situations.

• Press and hold the power button for 3 seconds to turn on the flashlight (steady light mode).
• Press the power button again to cycle through modes: Strobe → SOS → Warning Light → Off.
• Press and hold the power button again for 3 seconds to turn off the flashlight from any mode.

Image: The BuTure BR600 features an ultra-bright LED flashlight with Flash, SOS, Strobe, and Warning light modes for various emergencies.

7. cynnal

• Glanhau: Defnyddiwch frethyn meddal, sych i lanhau'r ddyfais. Peidiwch â defnyddio glanhawyr sgraffiniol na thoddyddion.
• Storio: Store the jump starter in a cool, dry place between 0°C and 45°C (32°F and 113°F). Avoid direct sunlight and high humidity.
• Ail-godi: Recharge the device every 3-6 months to prevent battery degradation, even if not in use.
• Bywyd batri: The internal lithium battery is designed for long life, but like all rechargeable batteries, its capacity will decrease over time.

8. Datrys Problemau

9. manylebau

10. Gwarant a Chymorth i Gwsmeriaid

BuTure products are designed and manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, product support, or technical assistance, please refer to the warranty card included in your package or visit the official BuTure websafle.

If you encounter any issues or have questions regarding your BuTure BR600, please contact our customer support team. Provide your model number (BR600) and purchase details for faster service.