Sharp Digital Alarm with AccuSet - Automatic Smart Clock User Manual

Rhagymadrodd

This manual provides detailed instructions for the setup, operation, and maintenance of your Sharp Digital Alarm Clock with AccuSet. Designed for ease of use, this clock automatically sets the time, making it ideal for all users.

Ffigur 1: Blaen view of the Sharp Digital Alarm Clock.

Nodweddion Cynnyrch

• AccuSet Automatic Time Set: Pre-programmed time for hassle-free setup.
• Quick Daylight Savings Time (DST) Adjustment: Simple switch for DST changes.
• High/Low Dimmer Control: Disgleirdeb arddangos addasadwy.
• Batri wrth gefn: Pre-installed CR2032 battery for time settings retention during power outages.
• Dewis Parth Amser: Easily select your local time zone.

Figure 2: Key features of the Sharp Digital Alarm Clock.

Gosod

1. Initial Power-Up and Time Zone Selection

1. Locate the time zone switch on the bottom of the clock.
2. Select your desired time zone (e.g., EST for Eastern Standard Time). The default is Eastern Standard Time.
3. Plug the clock into an approved electrical source. The AccuSet feature will automatically set the correct time.

2. Daylight Savings Time (DST) Adjustment

To adjust for Daylight Savings Time:

• Slide the DST switch on the bottom of the clock to ON to add one hour (+1 hr).
• For Standard Time, slide the switch to ODDI AR to subtract one hour (-1 hr).

3. Gwneud copi wrth gefn batri

The clock comes with a pre-installed CR2032 button cell battery. This battery retains time settings during power outages. It is located in a screw-secured compartment at the bottom of the clock.

Cyfarwyddiadau Gweithredu

Figure 3: Top panel controls and display indicators.

1. Gosod y Larwm

1. Gwasgwch y SET ALARM button once. The alarm time will flash on the display.
2. Gwasgwch y GOSOD AWR button to adjust the alarm hour. Observe the PM indicator for correct AM/PM setting.
3. Gwasgwch y COFNOD SET botwm i addasu'r munud larwm.
4. Gwasgwch y SET ALARM botwm eto i gadarnhau ac ymadael â'r modd gosod larwm.

2. Turning Alarm On/Off

• I droi'r larwm ON, gwasgwch y ALARM ON / OFF button. The alarm indicator light on the display will illuminate.
• I droi'r larwm ODDI AR, gwasgwch y ALARM ON / OFF button again. The alarm indicator light will turn off.

3. Swyddogaeth Snooze

Pan fydd y larwm yn canu, pwyswch y botwm mawr SNOOZE botwm wedi'i leoli ar ben y cloc. Bydd y larwm yn stopio dros dro ac yn canu eto ar ôl tua 9 munud.

4. Rheoli Pylu

I addasu disgleirdeb yr arddangosfa LED:

• Gwasgwch y DIMMER HI/LO button to toggle between high and low brightness settings.

Figure 4: Display brightness adjustment.

Cynnal a chadw

Battery Replacement (CR2032)

The pre-installed CR2032 battery is designed to last for several years. If the clock loses time during a power outage, the battery may need replacement.

1. Unplug the clock from the electrical outlet.
2. Locate the screw-secured battery compartment on the bottom of the clock.
3. Unscrew the compartment cover and carefully remove the old CR2032 battery.
4. Mewnosodwch fatri CR2032 newydd, gan sicrhau'r polaredd cywir (ochr + i fyny).
5. Rhowch glawr yr adran yn ôl a'i sicrhau gyda'r sgriw.
6. Plug the clock back into the electrical outlet.

Nodyn: Gwaredwch hen fatris yn gyfrifol yn unol â rheoliadau lleol.

Datrys problemau

Manylebau

• Brand: miniog
• Model: B089ZMSR39
• Lliw: Black-red Led
• Math Arddangos: Digidol
• Nodwedd arbennig: Set Auto
• Dimensiynau Cynnyrch: 5.5"L x 2.6"U
• Ffynhonnell Pwer: Trydan Corded
• Batri wrth gefn: 1 x CR2032 Lithium Ion (included)
• Pwysau Eitem: 10.2 owns
• UPC: 049353004426
• Gwneuthurwr: miniog

Ffigur 5: Dimensiynau'r cynnyrch.

Gwybodaeth Ychwanegol

For further assistance or product inquiries, please refer to the official Sharp websafle neu cysylltwch â'u cymorth cwsmeriaid.

Mae'r cynnyrch hwn wedi'i gynllunio ar gyfer defnydd dan do yn unig.