REACHER FM Alarm Clock Radio with Wireless and USB Charging - User Manual

1. Rhagymadrodd

Thank you for choosing the REACHER FM Alarm Clock Radio. This device combines an FM radio, an alarm clock, a wireless charging pad, and a USB charging port, designed to enhance your bedside experience. Please read this manual carefully before use to ensure proper operation and to fully utilize all features.

Image 1: REACHER Alarm Clock Radio highlighting its integrated features.

2. Gwybodaeth Diogelwch

• Peidiwch ag amlygu'r ddyfais i ddŵr na lleithder gormodol.
• Osgoi gosod y ddyfais ger ffynonellau gwres neu mewn golau haul uniongyrchol.
• Use only the provided power adapter or a compatible one.
• Peidiwch â cheisio dadosod na thrwsio'r ddyfais eich hun. Cysylltwch â phersonél gwasanaeth cymwys.
• Cadwch allan o gyrraedd plant.
• Sicrhewch awyru digonol o amgylch y ddyfais yn ystod y gweithrediad.

3. Cynnwys Pecyn

Gwiriwch fod yr holl eitemau yn bresennol:

• REACHER FM Alarm Clock Radio (Model: ACR-W-1)
• Addasydd Pŵer
• Llawlyfr Defnyddiwr

4. Cynnyrch Drosview

Familiarize yourself with the main components and controls of your alarm clock radio.

Delwedd 2: Blaen view of the device with key controls visible.

Rheolaethau a Phyrth:

• Arddangosfa LED: Shows time, alarm status, radio frequency.
• Pad Codi Tâl Di-wifr: Located on top for compatible devices.
• Botwm SNOOZE/DIMMER: Activates snooze, adjusts display brightness.
• Botwm GOSOD AMSER: Ar gyfer gosod yr amser cyfredol.
• Botwm GOSOD ALARM: For setting alarms.
• RADIO/BUZZER Button: Toggles between radio and buzzer alarm sound.
• Botwm SLEEP: Activates sleep timer for radio.
• VOL+/VOL- Buttons: Yn addasu cyfaint.
• SCAN/PRESET Buttons: Scans for FM stations, navigates presets.
• Porthladd Codi Tâl USB: Located at the back for wired charging.
• DC MEWN Porthladd: Ar gyfer cysylltiad addasydd pŵer.
• Adran Batri: For backup batteries (2x AAA, not included).

5. Gosod

5.1 Cysylltiad Pwer

1. Cysylltwch yr addasydd pŵer â'r porthladd DC IN ar gefn y cloc larwm.
2. Plygiwch yr addasydd pŵer i mewn i soced wal safonol. Bydd yr arddangosfa'n goleuo.

5.2 Gosod Batri Wrth Gefn

Install 2 AAA batteries (not included) into the battery compartment at the bottom of the unit. These batteries will preserve your time and alarm settings during a power outage.

5.3 Gosod yr Amser

1. Pwyswch a dal y SET AMSER botwm. Bydd y digidau awr yn fflachio.
2. Defnyddiwch y VOL+ or VOL- botymau i addasu'r awr.
3. Gwasgwch SET AMSER again to confirm the hour and move to minutes. The minute digits will flash.
4. Defnyddiwch y VOL+ or VOL- botymau i addasu'r cofnodion.
5. Gwasgwch SET AMSER one more time to confirm and exit time setting mode.
6. I newid rhwng fformat 12 awr a 24 awr, pwyswch y SET AMSER button briefly while the time is displayed. An "AM" or "PM" indicator will appear for 12-hour format.

6. Cyfarwyddiadau Gweithredu

6.1 Gosodiadau Larwm

The alarm clock supports two wake-up sounds: a buzzer or FM radio.

Image 3: Alarm sound options (Buzzer or Radio).

1. Pwyswch a dal y SET ALARM botwm. Bydd digidau awr y larwm yn fflachio.
2. Defnyddiwch y VOL+ or VOL- botymau i addasu'r awr larwm.
3. Gwasgwch SET ALARM again to confirm the hour and move to minutes. The alarm minute digits will flash.
4. Defnyddiwch y VOL+ or VOL- botymau i addasu munudau'r larwm.
5. Gwasgwch SET ALARM again to select the alarm sound: SYNWR or RADIO.
6. If RADIO is selected, use VOL+ or VOL- to set the desired alarm volume (5-30 levels).
7. Gwasgwch SET ALARM one more time to confirm and activate the alarm. An alarm icon will appear on the display.
8. I ddadactifadu'r larwm, pwyswch y SET ALARM button briefly until the alarm icon disappears.

6.2 Swyddogaeth Snooze

Pan fydd y larwm yn canu, pwyswch y botwm mawr SNOOZE / DIMMER button to temporarily silence the alarm for 9 minutes. You can repeat this up to 6 times.

To turn off the alarm completely after it sounds, press any other button (e.g., SET ALARM, RADIO/BUZZER).

Gweithrediad Radio 6.3 FM

1. Gwasgwch y RADIO/BUZZER button to turn on the FM radio. The frequency will be displayed.
2. Defnyddiwch y VOL+ or VOL- buttons to adjust the radio volume (0-30 levels).
3. Sgan Gorsaf Awtomatig: Pwyswch a dal y SCAN button to automatically scan and save available FM stations (87.5-108 MHz).
4. Tiwnio â Llaw: Pwyswch yn fyr y SCAN button to manually tune to the next available station.
5. Dwyn i gof Rhagosodiadau: After scanning, briefly press the RHAGOSOD botwm i gylchu trwy orsafoedd sydd wedi'u cadw.
6. I ddiffodd y radio, pwyswch y RADIO/BUZZER botwm eto.

Image 4: Enjoying FM Radio on the device.

6.4 Amserydd Cwsg

Mae'r amserydd cysgu yn caniatáu ichi syrthio i gysgu i'r radio, a fydd yn diffodd yn awtomatig ar ôl cyfnod penodol.

1. Tra bod y radio yn chwarae, pwyswch y CYSGU button repeatedly to cycle through sleep timer options (e.g., 5, 10, 15, 30, 60, 90, 120 minutes, or OFF).
2. The selected duration will be displayed briefly. The radio will turn off automatically after the set time.

6.5 Pylu Arddangosfa

The large LED display has 6 levels of brightness adjustment.

Image 5: Six levels of display brightness.

Pwyswch yn fyr y SNOOZE / DIMMER button (when the alarm is not sounding) to cycle through the 6 brightness levels: Bright, 90% DIM, 75% DIM, 50% DIM, 30% DIM, and OFF.

6.6 Swyddogaethau Gwefru

The alarm clock radio offers two ways to charge your devices.

Image 6: Two charging methods: Wireless and USB.

6.6.1 Wireless Charging (5W)

The top surface of the alarm clock features a 5W wireless charging pad compatible with Qi-enabled devices.

Delwedd 7: Enghraifftamples of universally compatible phones for wireless charging.

1. Place your Qi-compatible smartphone or device directly onto the wireless charging pad on top of the alarm clock.
2. Gwnewch yn siŵr bod y ddyfais wedi'i chanoli ar y pad i gael y gwefru gorau posibl.
3. The charging indicator on your device will show if it is charging.
4. Nodyn: Remove any thick cases or metallic objects from your device before charging wirelessly.

6.6.2 USB Charging Port (5V1A)

A USB charging port is located on the back of the unit for wired charging of other devices.

Delwedd 8: Enghraifftample of USB charging a tablet.

1. Cysylltwch gebl gwefru USB eich dyfais â'r porthladd USB ar gefn y cloc larwm.
2. Cysylltwch ben arall y cebl â'ch dyfais.
3. Bydd y ddyfais yn dechrau codi tâl.

7. cynnal

• Glanhau: Sychwch y ddyfais gyda lliain meddal, sych. Peidiwch â defnyddio glanhawyr hylif na deunyddiau sgraffiniol.
• Storio: If storing for an extended period, remove the backup batteries.

8. Datrys Problemau

9. manylebau

10. Gwarant a Chefnogaeth

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official REACHER website. Please have your model number (ACR-W-1) and purchase date ready when contacting support.

Nodyn: Information regarding spare parts availability is not provided by the manufacturer.