Moukey Ultra-Low Noise 8-Channel Line Stereo Audio Mixer

1. Rhagymadrodd

Diolch am brynuasing the Moukey MAMX3 Ultra-Low Noise 8-Channel Line Stereo Audio Mixer. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and to prevent damage.

Figure 1: Moukey MAMX3 8-Channel Line Stereo Audio Mixer

2. Cyfarwyddiadau Diogelwch

• Do not expose this device to rain or moisture to avoid fire or electric shock.
• Peidiwch ag agor y casing. Nid oes unrhyw rannau y gall y defnyddiwr eu gwasanaethu y tu mewn. Cyfeiriwch yr holl waith cynnal a chadw at bersonél cymwys.
• Sicrhewch y cyflenwad pŵer cyftagmae e yn cyd-fynd â'r gofynion a bennir ar yr uned.
• Osgowch osod yr uned ger ffynonellau gwres neu mewn golau haul uniongyrchol.
• Glanhewch gyda lliain sych yn unig. Peidiwch â defnyddio glanhawyr hylif.
• Cadwch allan o gyrraedd plant.

3. Nodweddion Cynnyrch

• Mewnbwn 8-sianel: Mix up to eight independent audio signals.
• Newid Stereo/Mono: Flexible input/output configuration for both stereo and mono signals. For stereo, use 1/4-inch (6.35mm) TRS stereo audio male-to-male cables. For mono, eight mono signal inputs are mixed into one mono signal output.
• Rheoli Cyfaint Annibynnol: Each input channel features a dedicated volume knob for precise level adjustment.
• Gweithrediad Sŵn Ultra-Isel: Designed for minimal distortion and excellent audio performance.
• Compact a Chludadwy: Space-saving design for easy transport and setup.
• Cyflenwad Pŵer DC 5V: Powered via DC 5V, offering versatile power options (e.g., USB port, power bank, 5V phone plug).
• Adeiladu Gwydn: Metel cadarn casing ensures longevity.

4. Cynnyrch Drosview

The Moukey MAMX3 mixer features a straightforward layout for easy operation. Below are diagrams illustrating the controls and input/output ports.

Ffigur 2: Rheolyddion y Panel Uchaf

• Input 1-8 Level Knobs: Adjust the volume for each individual input channel.
• Mono/Stereo Switches: Select between mono or stereo operation for input channels.
• Channel Output Mix L-R Switch: Combines channels 1-4 and 5-8 into a single stereo output.
• Output A/B Level Knobs: Adjust the overall output volume for Output A and Output B.

Figure 3: Rear Panel Input/Output Ports

• INPUT 1-8 (1/4" TRS/TS): Connect your audio sources here.
• OUTPUT A (1/4" TRS): Prif allbwn sain.
• OUTPUT B A/B L-R (1/4" TRS): Secondary audio output, can be configured for A/B or Left/Right stereo.
• DC 5V (USB-C): Porthladd mewnbwn pŵer.
• Pow Indicator: Yn goleuo pan fydd yr uned yn cael ei bweru ymlaen.

Ffigur 4: Dimensiynau'r Cynnyrch

5. Gosod

5.1 Cysylltiad Pwer

1. Locate the DC 5V USB-C port on the rear panel of the mixer.
2. Connect the provided USB cable to the mixer and to a compatible 5V power source (e.g., computer USB port, power bank, or 5V phone charger).
3. The 'Pow' indicator light will illuminate, indicating the mixer is receiving power.

Figure 5: Power Supply Options

5.2 Cysylltiadau Mewnbwn Sain

1. Connect your audio sources (e.g., microphones, guitars, bass, keyboards, media players) to the INPUT 1-8 jacks using 1/4-inch TRS or TS cables.
2. For stereo input, use 1/4-inch (6.35mm) TRS stereo audio male-to-male cables and ensure the corresponding Mono/Stereo switch is set to 'Stereo'.
3. For mono input, use 1/4-inch TS cables and ensure the corresponding Mono/Stereo switch is set to 'Mono'.

5.3 Cysylltiadau Allbwn Sain

1. Cysylltwch y jaciau OUTPUT A a/neu OUTPUT B â'ch amplifier, powered speakers, or recording device using 1/4-inch TRS cables.
2. Ensure all connections are secure before proceeding to operation.

6. Cyfarwyddiadau Gweithredu

6.1 Pweru Ymlaen/Diffodd

The mixer powers on automatically when connected to a 5V power source. Disconnect the power cable to turn off the unit.

6.2 Adjusting Channel Levels

1. Turn all LEVEL knobs (1-8) and OUTPUT A/B knobs to their minimum position before playing any audio.
2. Start playing audio from your connected source.
3. Slowly increase the LEVEL knob for the corresponding input channel until the desired volume is achieved.
4. Adjust the OUTPUT A/B knobs to control the overall master volume.

6.3 Stereo/Mono Mode Selection

Use the Mono/Stereo switches above each channel to select the desired mode. For stereo operation, ensure you are using TRS cables for both input and output and the switch is set to 'Stereo'. For mono operation, set the switch to 'Mono'.

6.4 Mixing Multiple Sources

The MAMX3 allows you to mix up to eight line-level signals. Adjust each channel's LEVEL knob independently to create your desired mix. The Channel Output Mix L-R switch can combine channels 1-4 and 5-8 into a single stereo output for simplified routing.

Figure 6: Mixer in a typical setup

7. cynnal

• Glanhau: Use a soft, dry cloth to clean the exterior of the mixer. Do not use abrasive cleaners, solvents, or waxes.
• Storio: Pan nad yw'n cael ei ddefnyddio am gyfnodau hir, storiwch y cymysgydd mewn lle oer, sych i ffwrdd o olau haul uniongyrchol a thymheredd eithafol.
• Gofal Cebl: Always handle cables by the connector, not the wire. Avoid bending or crimping cables excessively.

8. Datrys Problemau

9. manylebau

10. Gwarant a Chefnogaeth

This Moukey MAMX3 mixer comes with a Gwarant 12 mis o ddyddiad y pryniant. Mae'r warant hon yn cwmpasu diffygion gweithgynhyrchu a chrefftwaith o dan ddefnydd arferol.

Nid yw'r warant yn cynnwys difrod a achosir gan:

• Gosodiad neu weithrediad amhriodol.
• Addasiadau neu atgyweiriadau anawdurdodedig.
• Accidents, misuse, or neglect.
• Natural disasters or power surges.

For technical support, warranty claims, or any questions regarding your Moukey MAMX3 mixer, please contact our customer service team through the retailer where you purchased the product or visit the official Moukey websafle ar gyfer gwybodaeth cyswllt.

Nodyn: Dim fideo cynnyrch swyddogol URL (m3u8 format) was provided in the product data. Therefore, no video is embedded in this manual.