1. Rhagymadrodd
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Numatic HVR-169 Henry Parquet vacuum cleaner. Please read these instructions carefully before using the appliance and retain them for future reference.
2. Gwybodaeth Diogelwch
- Always disconnect the vacuum cleaner from the power supply before cleaning or performing any maintenance.
- Do not use the appliance to pick up liquids, flammable materials, or hot ashes.
- Ensure the dust bag and filters are correctly installed before operation.
- Cadwch wallt, dillad rhydd, bysedd, a phob rhan o'r corff i ffwrdd o agoriadau a rhannau symudol.
- Ni fwriedir i'r teclyn hwn gael ei ddefnyddio gan bobl â galluoedd corfforol, synhwyraidd neu feddyliol is, neu ddiffyg profiad a gwybodaeth, oni bai eu bod wedi cael goruchwyliaeth neu gyfarwyddyd.
- Peidiwch â gweithredu'r sugnwr llwch gyda llinyn neu blwg wedi'i ddifrodi.
3. Cydrannau Cynnyrch
The Numatic HVR-169 Henry Parquet vacuum cleaner comes with various components designed for effective cleaning across different surfaces. Familiarize yourself with these parts for optimal use.
Delwedd 1: Drosoddview of Numatic HVR-169 Henry Parquet vacuum cleaner components. This includes the flexible hose, curved and straight extension wands, a crevice tool, a dusting brush, an upholstery tool, and three distinct floor tools, one of which is specifically designed for parquet floors.
- Pibell Hyblyg: Connects to the vacuum cleaner and provides the main suction path.
- Curved Metal Wand: Used for comfortable handling and attachment of accessories.
- Straight Metal Extension Wands (x2): Extend reach for floor cleaning and high-level dusting.
- Offeryn Agen: Yn ddelfrydol ar gyfer bylchau cul, corneli ac ymylon.
- Brwsh Llwch: For delicate surfaces, shelves, and intricate areas.
- Offeryn Clustogwaith: Designed for cleaning fabric surfaces like sofas and curtains.
- Parquet Floor Tool: Features soft bristles for gentle and effective cleaning of hard floors, especially parquet.
- Combination Floor Tool: A versatile tool for both carpets and hard floors, often with a switch to adjust brush height.
4. Gosod
- Dadbacio: Tynnwch yr holl gydrannau o'r pecyn yn ofalus.
- Gosod Bag Llwch: Open the vacuum cleaner head. Ensure a dust bag is correctly fitted inside the drum. If not, insert a new Numatic HepaFlo bag, ensuring the collar is securely seated in the inlet.
- Cysylltiad pibell: Insert the flexible hose into the suction inlet on the front of the vacuum cleaner until it clicks securely into place.
- Cynulliad Wand: Connect the two straight metal extension wands to the curved metal wand. Then, attach the curved metal wand to the end of the flexible hose.
- Floor Tool Attachment: Select the appropriate floor tool (e.g., Parquet Floor Tool for hard floors) and attach it to the end of the assembled wands.
5. Cyfarwyddiadau Gweithredu
- Cysylltiad Pwer: Extend the power cable from the cable rewind system. Plug the power cord into a suitable mains socket.
- Pŵer ymlaen / i ffwrdd: Press the red 'ON/OFF' switch located on the top of the vacuum cleaner to start or stop the appliance.
- Defnyddio Atodiadau:
- For floors, use the assembled wands and a floor tool.
- For upholstery, remove the wands and attach the upholstery tool directly to the curved wand or hose end.
- For crevices and tight spaces, use the crevice tool.
- For dusting, use the dusting brush.
- Cable Rewind: When finished, unplug the vacuum cleaner. Gently press the foot pedal or pull the cable slightly to activate the automatic cable rewind system. Guide the cable to prevent tangling.
6. cynnal
Mae cynnal a chadw rheolaidd yn sicrhau perfformiad gorau posibl ac yn ymestyn oes eich sugnwr llwch.
6.1. Amnewid Bag Llwch
- Datgysylltwch y sugnwr llwch o'r cyflenwad pŵer.
- Unclip the head of the vacuum cleaner and lift it off.
- Carefully remove the full dust bag by pulling the cardboard collar away from the inlet. Seal the bag if it has a sealing mechanism.
- Insert a new Numatic HepaFlo dust bag, ensuring the collar is fully seated in the inlet.
- Replace the vacuum cleaner head and secure the clips.
6.2. Glanhau Hidlo
The main filter (usually a large cloth filter) should be checked periodically. If it appears dirty, gently shake or brush off loose dust. Do not wash the main filter unless specifically instructed by Numatic, as this can damage it.
6.3. Hose and Attachment Cleaning
Check the hose and attachments regularly for blockages. If a blockage is found, disconnect the component and carefully remove the obstruction. Wipe attachments with a damp brethyn os oes angen.
7. Datrys Problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Nid yw'r sugnwr llwch yn troi ymlaen. | Dim cyflenwad pŵer. | Check if the plug is correctly inserted and the wall socket is functional. |
| Colli sugno. | Full dust bag or blocked hose/filter. | Replace the dust bag. Check the hose, wands, and floor tool for blockages. Inspect and clean the main filter. |
| Sŵn anarferol yn ystod y llawdriniaeth. | Foreign object in the fan or motor area. | Immediately switch off and unplug. Check for any visible obstructions in the hose or attachments. If the noise persists, contact customer support. |
8. manylebau
- Brand: Numatic
- Rhif Model: HVR16911
- Enw Cynnyrch: Henry Parquet
- Pwer: 620 Wat
- Pwysau Eitem: Tua 1 cilogram
9. Gwarant a Chefnogaeth
For warranty information, please refer to the documentation provided with your purchase or visit the official Numatic website. If you encounter issues not covered in this manual or require further assistance, please contact Numatic customer support.