SFX JPT 50W 175x175mm Fiber Laser Marking Machine User Manual

1. Rhagymadrodd

This manual provides essential information for the safe and efficient operation of your SFX JPT 50W 175x175mm Fiber Laser Marking Machine. Please read this manual thoroughly before operating the machine to ensure proper usage, prevent damage, and maintain safety.

Ffigur 1.1: SFX JPT 50W 175x175mm Fiber Laser Marking Machine. This image displays the complete laser marking system, including the main control unit and the laser head assembly mounted on an adjustable stand with a work bed.

2. Gwybodaeth Diogelwch

The SFX JPT 50W Fiber Laser Marking Machine is a Class 1 laser product with an output power of 0.39mW. While designed for safety, improper use can lead to serious injury. Adhere to all safety guidelines.

• Amddiffyn Llygaid: Always wear appropriate laser safety goggles when operating or observing the machine in operation. Direct or reflected laser light can cause permanent eye damage.
• Personél Awdurdodedig: Only trained and authorized personnel should operate this equipment.
• Maes Gwaith: Ensure the work area is clear of flammable materials. Provide adequate ventilation to remove fumes generated during marking.
• Stopio Argyfwng: Familiarize yourself with the location and function of the emergency stop button.
• Diogelwch Trydanol: Ensure the machine is properly grounded. Do not operate with damaged cables or if the machine appears to be malfunctioning.
• Diogelwch Deunydd: Be aware of the materials being marked. Some materials can produce hazardous fumes or ignite when exposed to laser energy.

3. Cynnwys Pecyn

Upon unpacking, verify that all items listed below are present and undamaged. If any items are missing or damaged, contact your supplier immediately.

Ffigur 3.1: Visual representation of the SFX Fiber Laser Marking Machine's packing list. This image shows the main machine, safety goggles, Allen wrench set, USB drive, power line, foot switch, positioning screws, lock bar, and an optional D80 rotary device.

4. Nodweddion a Chydrannau'r Cynnyrch

The SFX JPT 50W Fiber Laser Marking Machine incorporates advanced components for high-precision marking.

4.1 Laser Source and Lens

Ffigur 4.1: Manwl view of the JPT LP series laser source and F-Theta lens. The laser source is a red rectangular unit with cooling fans, and the lens is shown with its optical elements.

• Ffynhonnell laser: JPT LP+ series pulsed fiber laser. This source utilizes Master Oscillator Power Amplifier (MOPA) configuration, offering excellent laser performance, wide frequency range, high control precision, and superior pulse shaping capabilities compared to Q-switching technology.
• Lens: Jollystar & Wavelength F-Theta Lenses. These lenses feature multiple optical elements, an air-spaced design, and high-efficiency AR coating for optimal image resolution and throughput. They are designed with industry-standard M85 threading for easy mounting.

4.2 Control Board and Galvo Scanner

Ffigur 4.2: The JCZ-LMCV4 control board and Sino-Galvo & ZBTK galvo scanner. The control board is a green circuit board with various connectors, and the galvo scanner is a silver and blue unit with a caution label.

• Bwrdd Rheoli: JCZ-LMCV4. This stable and reliable control board provides various interfaces and is compatible with EZCAD2.0 software (and Lightburn).
• Galvo Scanner: Sino-Galvo & ZBTK. This scanner ensures good running stability, high positioning accuracy, fast marking speed, and strong anti-interference ability.

4.3 Machine Interface and Rotary Axis (Optional)

Ffigur 4.3: Close-up of the machine's aviation plug and socket interfaces, along with an image of the optional D80 rotary axis. The interfaces include USB ports and circular aviation connectors, while the rotary axis is a silver mechanical device for cylindrical object marking.

• Machine Interface: Features industrial standard aviation plugs and sockets, designed to be dust-proof and water-proof, ensuring reliable connections for various boards.
• Rotary Axis (Optional): D80 Rotary Axis with 57*76 Stepper Motor. This accessory allows for marking on cylindrical objects with a clamping range of 2-70mm and an axis height of 130mm. It supports elevation angles of 90° and depression angles of 45°. Other sizes (D100/125/160mm) may be available.

4.4 Double Red Dot Focusing and Work Bed

Ffigur 4.4: Illustration of the double red dot focusing mechanism and the aluminum alloy work bed. The focusing image shows two red laser dots converging on a surface, and the work bed is a perforated silver plate.

• Double Red Dot Focusing: Utilizes a red guideline and two red dots for easy and precise focusing, ensuring optimal laser performance on the material surface.
• Work Bed: Constructed from aluminum alloy with an open design and location holes, facilitating easy and accurate positioning of materials for marking.

5. Cyfarwyddiadau Gosod

Follow these steps to set up your laser marking machine.

1. Dadbacio: Tynnwch yr holl gydrannau o'r pecynnu yn ofalus. Cadwch y pecynnu ar gyfer cludiant neu storio yn y dyfodol.
2. Lleoliad: Place the machine on a stable, level surface in a well-ventilated area, away from direct sunlight and excessive dust.
3. Cynulliad:
   • Attach the laser head assembly to the vertical column, ensuring it is securely fastened.
   • Connect the main control unit to the laser head using the provided cables, ensuring all aviation plugs and USB connections are firm.
   • If using the optional rotary axis, connect it to the designated port on the control unit.
4. Cysylltiad Pwer: Connect the power line to the machine and then to a grounded electrical outlet (110V-240V/50-60Hz). Do not power on yet.
5. Gosod Meddalwedd: Insert the provided USB drive containing the software (EZCAD2.0) and user manual into your computer. Follow the on-screen instructions to install the software and necessary drivers.
6. Cysylltiad Cyfrifiadurol: Cysylltwch y peiriant â'ch cyfrifiadur gan ddefnyddio'r cebl USB a ddarperir.
7. Pŵer Cychwynnol Ar: Ensure all connections are secure. Turn the key switch to the ON position and press the power button. The machine should initialize.

6. Cyfarwyddiadau Gweithredu

This section outlines the basic steps for operating the laser marking machine. Refer to the EZCAD2.0 software manual on the provided USB drive for detailed software operations.

1. Paratoi deunydd: Place the material to be marked on the work bed. Use the positioning holes or clamps to secure it if necessary.
2. Lansio Meddalwedd: Open the EZCAD2.0 software on your connected computer.
3. Design/Load Marking File: Create your desired text, graphics, or load an existing marking file o fewn y meddalwedd.
4. Gosodiadau Paramedr: Adjust laser parameters such as power, frequency, speed, and pulse duration according to the material and desired marking effect. Refer to the software manual for guidance on specific material settings.
5. Canolbwyntio:
   • Activate the red light pointer in the software.
   • Adjust the height of the laser head until the two red dots from the double red dot focusing system converge into a single, sharp point on the surface of your material. This indicates optimal focus.
6. Cynview Marking Area: Use the "Red Light Preview" function in the software to project the marking outline onto your material, ensuring correct placement.
7. Start Marking: Ensure all safety precautions are in place (e.g., wearing safety goggles). Press the "Mark" button in the software or use the foot switch to begin the marking process.
8. Monitro Proses: Observe the marking process. If any issues arise, press the emergency stop button immediately.
9. Cwblhau: Once marking is complete, remove the marked material.

7. cynnal

Regular maintenance ensures the longevity and optimal performance of your laser marking machine.

• Glanhau'r Lens: Periodically inspect and clean the F-Theta lens using a specialized optical lens cleaning solution and lint-free wipes. Dust and debris can degrade marking quality.
• Work Area Cleanliness: Keep the work bed and surrounding area clean from debris and dust.
• Archwiliad cebl: Regularly check all cables and connections for wear, damage, or looseness.
• Awyru: Ensure the machine's ventilation openings are clear and unobstructed to prevent overheating.
• Diweddariadau Meddalwedd: Keep your EZCAD2.0 software updated to the latest version for optimal performance and features.

8. Datrys Problemau

Mae'r adran hon yn mynd i'r afael â phroblemau cyffredin y gallech ddod ar eu traws. Ar gyfer problemau mwy cymhleth, cysylltwch â chymorth technegol.

9. manylebau

Detailed technical specifications for the SFX JPT 50W Fiber Laser Marking Machine.

10. Applicable Materials

The SFX JPT 50W Fiber Laser Marking Machine is suitable for marking and engraving a wide range of materials, and for cutting certain metals.

Ffigur 10.1: Chart illustrating materials compatible with laser cutting, marking, and engraving using this machine. It shows various metals and non-metals with checkmarks indicating compatibility.

11. Gwarant a Chefnogaeth

For warranty information, technical support, or service inquiries, please contact the manufacturer or your authorized dealer. Refer to your purchase documentation for specific warranty terms and contact details.

Manufacturer: Luoyang SFX Industrial Technology Co.,Ltd

Am adnoddau ychwanegol, gallwch ymweld â'r SFX Industrial Technology Store on Amazon.