SFX 50W JPT Fiber Laser Engraver with Rotary Axis

1. Rhagymadrodd

The SFX 50W JPT Fiber Laser Engraver is a high-precision marking machine designed for a wide range of materials. Equipped with a JPT LP+ Series laser source and a Dia.80mm rotating head, it offers exceptional performance for engraving and marking tasks. This manual provides essential information for the safe and efficient operation of your laser engraver, covering setup, usage, maintenance, and troubleshooting.

Key features include a 175x175mm marking area, engraving depth of up to 1mm, and compatibility with Lightburn software on Windows XP/Vista/7/8/10. Its robust design ensures stable performance and high reliability for both industrial and personal use.

2. Gwybodaeth Diogelwch

Operating a fiber laser engraver requires strict adherence to safety protocols to prevent injury and damage. This machine is a Class Ⅱ laser product with a laser output of 0.874mW.

• Amddiffyn Llygaid: Always wear appropriate laser safety goggles that are rated for the specific wavelength of the fiber laser (typically 1064nm) when the machine is in operation. Direct or scattered laser exposure can cause severe eye damage.
• Diogelu'r croen: Avoid direct exposure of skin to the laser beam.
• Awyru: Ensure adequate ventilation in the work area to dissipate fumes and particles generated during engraving, especially when working with certain materials.
• Diogelwch Tân: Keep a fire extinguisher nearby. Some materials can ignite when exposed to the laser. Never leave the machine unattended during operation.
• Diogelwch Trydanol: Gwnewch yn siŵr bod y peiriant wedi'i seilio'n iawn. Peidiwch â gweithredu â dwylo gwlyb neu mewn cyflwr gwael.amp environments. Disconnect power before performing any maintenance or adjustments.
• Personél Awdurdodedig: Only trained and authorized personnel should operate and maintain the laser engraver.

3. Cynnyrch Drosview a Chydrannau

The SFX 50W JPT Fiber Laser Engraver consists of several key components that work together to achieve precise marking. Understanding these components is crucial for proper setup and operation.

Ffigur 3.1: Prif view of the SFX 50W JPT Fiber Laser Engraver with the rotary axis attached. The machine features a blue and silver housing for the control unit and a vertical column with the laser head and work platform.

Figure 3.2: Detailed diagram illustrating the dimensions and key components of the laser engraver, including the elevating mechanism, high-speed galvanometer, lens, lifting hand, control panel, control cabinet, heat emission holes, and working table.

Prif Gydrannau:

• Laser Source (JPT LP+ Series): Generates the laser beam for marking.
• Galvanometer Scanner: Directs the laser beam rapidly across the marking area.
• F-Theta Lens: Yn canolbwyntio'r trawst laser ar wyneb y deunydd.
• Control Board (BJ JCZ): Manages the laser's functions and communicates with the software.
• Work Bed: The platform where materials are placed for engraving.
• Rotary Axis (Optional): Allows for engraving on cylindrical or irregular shaped objects.
• Cabinet Rheoli: Houses the power supply and control electronics.

Figure 3.3: The JPT LP+ Series laser source, responsible for generating the high-quality laser beam.

Figure 3.4: The F-Theta lens, which focuses the laser beam onto the material for precise marking.

Figure 3.5: The D80 rotary axis, an optional component for engraving on curved or cylindrical surfaces.

4. manylebau

Detailed technical specifications for the SFX 50W JPT Fiber Laser Engraver.

5. Gosod

Follow these steps for the initial setup of your SFX Fiber Laser Engraver:

1. Dadbacio: Carefully remove all components from the packaging. Verify that all items listed in the packing list (refer to Figure 5.1) are present and undamaged.
2. Lleoliad: Place the laser engraver on a stable, level surface in a well-ventilated area, away from flammable materials. Ensure sufficient space around the machine for operation and maintenance.
3. Cynulliad: Connect the laser head assembly to the main control unit. If using the rotary axis, connect it to the designated port on the control unit. Ensure all cables are securely fastened.
4. Cysylltiad Pwer: Connect the power cable to the machine and then to a grounded electrical outlet. Ensure the power supply matches the machine's requirements.
5. Gosod Meddalwedd: Install the EZCAD2 software or Lightburn software on your computer. Drivers for the BJ JCZ control board may need to be installed separately. Refer to the software's installation guide for detailed instructions.
6. Initial Alignment: Perform initial alignment of the laser path and focus. The machine features double red dot focusing for easier alignment.

Ffigur 5.1: An example packing list and various marking effects achievable with the laser engraver.

6. Cyfarwyddiadau Gweithredu

This section outlines the general steps for operating your SFX Fiber Laser Engraver for marking and engraving tasks.

6.1 Gweithrediad Sylfaenol:

1. Pŵer Ymlaen: Turn on the main power switch on the control cabinet.
2. Lansio Meddalwedd: Launch the EZCAD2 or Lightburn software on your connected computer.
3. Creu/Mewnforio Dyluniad: Create your desired marking design or import an existing file (e.g., vector graphics, text).
4. Lleoliad Deunydd: Place the material to be engraved on the work bed. Ensure it is stable and properly positioned. For cylindrical objects, use the rotary axis.
5. Addasiad Ffocws: Adjust the height of the laser head using the elevating mechanism until the red guide dots converge, indicating proper focus.
6. Gosod Paramedr: Set the laser parameters (power, speed, frequency, loop count) in the software based on the material type and desired engraving depth. Refer to material testing guidelines for optimal settings.
7. Cynview (Red Light): Use the red light preview function in the software to verify the marking area and position on your material before starting the laser.
8. Dechrau Engrafiad: Once satisfied with the preview, initiate the engraving process from the software. Ensure all safety precautions are in place.
9. Pwer i ffwrdd: After completing the task, turn off the laser and then the main power switch.

6.2 Applicable Materials:

The SFX Fiber Laser Engraver is suitable for marking on a wide range of materials:

• Pob Metel: Aluminum, Stainless Steel, Brass, Copper, Gold, Silver, Titanium, Steel, etc.
• Some Non-metals: Nylon, Light Button, ABS, PVC, PES, etc.

Ffigur 6.1: Examples of diverse materials and intricate designs that can be marked or engraved with the SFX Fiber Laser Engraver.

7. cynnal

Mae cynnal a chadw rheolaidd yn sicrhau hirhoedledd a pherfformiad gorau posibl eich ysgythrwr laser.

• Glanhau'r Lens: Periodically clean the F-Theta lens with a specialized lens cleaning solution and lint-free wipes. Dust and debris can affect laser performance.
• Galvanometer Mirror Cleaning: If necessary, carefully clean the galvanometer mirrors following manufacturer guidelines.
• Work Bed Cleaning: Keep the work bed clean from debris and residue.
• System Awyru: Ensure the heat emission holes and internal fans are free from dust buildup to maintain proper cooling.
• Archwiliad cebl: Archwiliwch bob cebl yn rheolaidd am arwyddion o draul neu ddifrod. Amnewidiwch unrhyw geblau sydd wedi'u difrodi ar unwaith.
• Rheolaeth Amgylcheddol: Operate the machine in a clean, dry, and temperature-controlled environment to prevent dust accumulation and condensation.

8. Datrys Problemau

Mae'r adran hon yn darparu atebion i broblemau cyffredin y gallech ddod ar eu traws.

For issues not listed here or if problems persist, please contact SFX customer support.

9. Gwarant a Chefnogaeth

Your SFX 50W JPT Fiber Laser Engraver comes with a Gwarant 2 mlynedd o ddyddiad y pryniant, gan gwmpasu diffygion gweithgynhyrchu a chamweithrediadau o dan ddefnydd arferol. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.

For technical assistance, troubleshooting, or warranty inquiries, please contact SFX customer support. Many users have reported excellent support from SFX, including remote assistance for software and driver issues.

Cefnogaeth i Gwsmeriaid: Refer to the contact information provided with your product packaging or visit the official SFX websafle am fanylion cymorth.