Paww WaveCast Portable Bluetooth 5.0 Audio Transmitter User Manual

1. Rhagymadrodd

The Paww WaveCast is a portable Bluetooth 5.0 audio transmitter designed to wirelessly stream audio from non-Bluetooth devices to Bluetooth headphones or speakers. It features aptX Low Latency technology for synchronized audio and an extended range of up to 100 feet (30 meters). The device supports connecting to two audio receivers simultaneously, making it suitable for shared listening experiences.

2. Beth sydd yn y Bocs

• Paww WaveCast Portable Bluetooth Audio Transmitter
• Llawlyfr Defnyddiwr
• Cebl Codi Tâl Micro-USB

3. Gwybodaeth Diogelwch

Please read and follow these safety guidelines to ensure proper use and prevent damage to the device or injury:

• Triniwch fatris yn ofalus.
• Osgoi amlygu'r ddyfais i ddŵr neu dymheredd eithafol.
• Do not use the device while sleeping or operating machinery.
• Cadwch allan o gyrraedd plant.

4. Cynnyrch Drosview

The Paww WaveCast features a compact design with integrated audio jacks and intuitive controls.

Delwedd: Brig view of the Paww WaveCast, highlighting the central power/pairing button, two headphone icons indicating dual connection capability, and four LED battery/status indicators.

Delwedd: The Paww WaveCast with its single 3.5mm audio jack extended, ready for connection to standard audio ports.

Delwedd: The Paww WaveCast with both dual 3.5mm audio jacks extended, suitable for in-flight entertainment systems or other dual-jack audio sources.

Delwedd: Ochr view of the Paww WaveCast, displaying the micro-USB charging port.

5. Gosod

5.1 Codi Tâl ar y Dyfais

Before first use, fully charge your WaveCast. Connect the supplied micro-USB cable to the charging port on the device and the other end to a USB power source. A full charge takes approximately 30 minutes and provides up to 10 hours of playtime.

5.2 Pairing with Bluetooth Headphones/Speakers

1. Ensure your WaveCast is charged and powered on.
2. Press and hold the central button on the WaveCast until the LED indicators begin to flash, indicating pairing mode.
3. Place your Bluetooth headphones or speakers in pairing mode (refer to their respective manuals for instructions).
4. The WaveCast will automatically search for and connect to nearby Bluetooth devices. Once connected, the LED indicator(s) will show a steady light.
5. To connect a second pair of headphones, repeat steps 2-4.

5.3 Cysylltu â Ffynhonnell Sain

The WaveCast is compatible with any device that has a 3.5mm audio output port.

• Single 3.5mm Port: Extend the single 3.5mm audio jack from the WaveCast and insert it into the audio output port of your device (e.g., TV, gym equipment, Nintendo Switch).
• Dual 3.5mm Ports (e.g., In-flight Entertainment): Extend both 3.5mm audio jacks from the WaveCast and insert them into the corresponding dual audio ports of the entertainment system.

6. Cyfarwyddiadau Gweithredu

6.1 Pŵer Ymlaen/Diffodd

• Pŵer Ymlaen: Press and hold the central button for a few seconds until the LED indicators light up.
• Pwer i ffwrdd: Press and hold the central button for a few seconds until the LED indicators turn off.

6.2 Audio Streaming

Once connected to an audio source and paired with your Bluetooth headphones/speakers, audio will automatically stream wirelessly. The WaveCast's aptX Low Latency codec ensures minimal audio delay, providing a synchronized experience for video content.

6.3 Extended Range

The WaveCast utilizes Bluetooth 5.0 technology to offer an extended wireless range of up to 100 feet (30 meters) in optimal conditions, allowing for greater freedom of movement while listening.

7. cynnal

• Glanhewch y ddyfais gyda lliain meddal, sych. Peidiwch â defnyddio cemegau llym na deunyddiau sgraffiniol.
• Storiwch y ddyfais mewn lle oer, sych pan nad yw'n cael ei ddefnyddio.
• Osgoi gollwng y ddyfais neu ei darostwng i effeithiau cryf.
• To preserve battery life, charge the device regularly and avoid fully discharging it for extended periods.

8. Datrys Problemau

• Dim Sain: Ensure the WaveCast is fully charged, powered on, and correctly plugged into the audio source. Verify that your headphones/speakers are paired and powered on. Check the volume levels on both the audio source and your receiving device.
• Materion paru: Make sure both the WaveCast and your headphones/speakers are in pairing mode. Try turning both devices off and on again. Ensure no other Bluetooth devices are interfering with the pairing process.
• Ansawdd Sain Gwael/Datgysylltiadau: Ensure the WaveCast and receiving device are within the 100-foot range and there are no significant obstructions. Reduce interference from other wireless devices.
• Problemau Codi Tâl: Verify the micro-USB cable is securely connected to both the WaveCast and the power source. Try a different USB cable or power adapter.

9. manylebau

10. Gwarant a Chefnogaeth

10.1 Gwybodaeth Gwarant

For detailed warranty information regarding your Paww WaveCast, please refer to the warranty card included with your product or visit the official Paww websafle. Gall telerau ac amodau'r warant amrywio yn ôl rhanbarth.

10.2 Cefnogaeth i Gwsmeriaid

If you encounter any issues or have questions not covered in this manual, please contact Paww customer support through their official website or the contact information provided with your purchase. You can also visit the Paww Store on Amazon am adnoddau ychwanegol.