PETNF Dog House Heater with Thermostat & App Remote Control

1. Rhagymadrodd

This manual provides essential information for the safe and effective operation of your PETNF Dog House Heater. Please read these instructions thoroughly before installation and use, and retain them for future reference. This heater is designed to provide warmth for pets in outdoor enclosures, featuring smart app control, an adjustable thermostat, and a timer function.

2. Gwybodaeth Diogelwch

• Ensure the heater is installed in a location where it cannot be easily accessed or damaged by pets.
• The power cord features an anti-chew design; however, regular inspection for damage is recommended.
• Do not cover the heater with blankets or other materials, as this can lead to overheating.
• Cadwch y gwresogydd i ffwrdd o ddeunyddiau fflamadwy.
• This appliance is for outdoor use and should not be used indoors in residential areas.
• Datgysylltwch y gwresogydd bob amser cyn glanhau neu wneud unrhyw waith cynnal a chadw.
• Built-in overheating protection will automatically shut off the unit if it reaches an unsafe temperature.
• The controller is IPX5 waterproof, suitable for rainy or snowy weather, but the main heater unit should be protected from direct heavy rain.

3. Cynnwys Pecyn

• PETNF Dog House Heater Unit
• Thermostat Controller with 6FT Anti-Chew Cord
• Braced Mowntio
• Sgriwiau ar gyfer Gosod
• 3M Stickers for Controller (optional installation)
• Llawlyfr Defnyddiwr

4. Nodweddion Cynnyrch

• Rheolaeth Anghysbell Ap Clyfar: Monitor and control the heater remotely via a dedicated app after connecting to Wi-Fi.
• Thermostat addasadwy: Set temperature from 41 ℉ to 113 ℉ (5 ℃ to 45 ℃).
• Swyddogaeth Amserydd: Set heating time from 0 to 24 hours.
• Nodweddion Diogelwch: Built-in overheating protection, internal heat shield, rounded corners, and 6-foot metal anti-bite cord.
• Arbed Ynni: Integrated temperature sensor automatically stops heating when the set temperature is reached and restarts when the ambient temperature drops 2 ℃ below the set point.
• Defnydd Amlbwrpas: Suitable for dog houses, rabbit cages, chicken coops, pet pigs, and barn cats.
• Gweithrediad Tawel: Yn gweithredu ar lai na 45dB.

5. Gosod a Gosod

The PETNF Dog House Heater is designed for easy installation. Follow these steps:

Heater Unit Installation (4 Steps)

1. Find a suitable position: Choose a location inside the dog house that is taller than your pet to prevent direct contact.
2. Tyllau drilio: Use the provided mounting bracket as a template to mark and drill holes for the screws.
3. Diogelwch y braced: Attach the mounting bracket to the dog house wall using the screws.
4. Hang the heater: Slide the heater unit onto the secured mounting bracket until it clicks into place.

Image: PETNF Dog House Heater unit and controller.

Image: Installation of the heater unit inside a dog house, showing the unit mounted on the wall.

Controller Installation (3 Ways)

The controller can be installed in several ways for convenience:

1. Direct Attachment (No Drilling): Use the two included 3M stickers to attach the controller directly to the exterior of the dog house.
2. Under Eaves (Screws Included): Hang the controller securely under the eaves of the dog house using the provided screws.
3. Near Door (Rainy/Snowy Weather): For easy operation during inclement weather, the controller can be hung near the dog house door.

Image: Controller installation options for the PETNF Dog House Heater, showing different mounting methods.

Cysylltiad Ap

To utilize the smart app features, follow these steps:

1. Scan the QR code in the manual (or search for "PETNF smart" in your app store) to download the app.
2. Long press the Wi-Fi button on the controller for 5 seconds until the Wi-Fi signal light flashes, indicating successful startup.
3. Gwnewch yn siŵr bod Bluetooth eich ffôn wedi'i alluogi.
4. Connect your phone to your home Wi-Fi network (2.4GHz only) and open the PETNF smart app.
5. Through the "Auto Scan" feature in the app, locate and add the "Dog House Smart Heater" device.
6. Enter your Wi-Fi password in the app to connect the heater to your network.
7. Once successfully connected, you can set the temperature and time freely through the app.

6. Cyfarwyddiadau Gweithredu

Rheolaeth â Llaw

• Pŵer ymlaen / i ffwrdd: Pwyswch y botwm pŵer ar y rheolydd i droi'r gwresogydd ymlaen neu i ffwrdd.
• Addasiad Tymheredd: Use the '+' and '-' buttons to adjust the desired temperature. The display shows the current and set temperatures.
• Uned Tymheredd: Press the ℃/℉ button to switch between Celsius and Fahrenheit.
• Gosodiad amserydd: Press the 'TIME' button to set a countdown timer for heating duration (0-24 hours).
• Clo Plant: Activate the child lock feature to prevent accidental changes to settings.

Rheoli App

Ar ôl cysylltu â'r ap, gallwch:

• Remotely turn the heater on or off.
• Adjust the temperature settings from 41 ℉ to 113 ℉ (5 ℃ to 45 ℃).
• Set a heating timer or schedule specific operating times.
• Monitor the current temperature inside the pet enclosure.
• Enable or disable the child lock feature.

Image: App interface showing options for personalized scheduling of heater operation.

Modd Arbed Ynni

The heater features a smart induction system. When the ambient temperature reaches the set level, the heater will automatically pause. It will resume heating if the temperature drops 2 ℃ below the set point, ensuring optimal warmth and energy efficiency.

Image: Heater with ECO Auto Function, illustrating energy savings.

7. cynnal

• Glanhau: Gwnewch yn siŵr bod y gwresogydd wedi'i ddatgysylltu ac wedi oeri cyn ei lanhau. Sychwch y tu allan gyda lliain meddal, damp lliain. Peidiwch â defnyddio glanhawyr sgraffiniol na throchi'r uned mewn dŵr.
• Arolygiad: Regularly check the power cord and heater unit for any signs of damage, wear, or fraying. If damage is found, discontinue use and contact customer support.
• Storio: If storing the heater for an extended period, ensure it is clean, dry, and stored in a safe place away from extreme temperatures and moisture.

8. Datrys Problemau

9. manylebau

10. Gwarant a Chefnogaeth

This product comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact PETNF customer service through the contact information provided on the product packaging or the official PETNF websafle. Cadwch eich derbynneb prynu fel prawf o brynu.