SMALLRIG Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K (KCVB2419) Instruction Manual

1. Rhagymadrodd

This instruction manual provides detailed guidance for the assembly, operation, and maintenance of the SMALLRIG Camera Cage Kit (Model KCVB2419). This kit is specifically designed to enhance the functionality and protection of your Blackmagic Design Pocket Cinema Camera 4K or 6K, offering multiple mounting points for accessories and improved handling.

2. Cynnwys Pecyn

The SMALLRIG Camera Cage Kit KCVB2419 includes the following components:

• Integrated Full Camera Cage
• Trin Uchaf
• SSD Holder (for Samsung T5 SSD)
• Necessary mounting screws and Allen wrench

Ffigur 2.1: Wedi ffrwydro view of the SMALLRIG Camera Cage Kit components, illustrating the full cage, top handle, and SSD holder.

3. Gosod a Gosod

Follow these steps to properly install the camera cage and its accessories:

3.1 Attaching the Camera Cage

1. Carefully place your Blackmagic Design Pocket Cinema Camera 4K or 6K into the cage.
2. Secure the camera by tightening the 1/4"-20 screws located on both the top and bottom of the cage. Ensure the camera is firmly seated against the rubber pads and locating pins on the base plate to prevent movement and scratches.

Figure 3.1: Detail of the cage's base plate with rubber pads and locating pins, and a side view showing the securing screw.

3.2 Cysylltu'r Ddolen Uchaf

1. Align the top handle with the NATO rail located on the top of the camera cage.
2. Slide the handle onto the NATO rail and secure it by tightening the locking mechanism. The handle can be adjusted fore and aft for optimal balance.

Figure 3.2: The top handle attached to the camera cage via the NATO rail.

3.3 Attaching the SSD Holder

1. Mount the SSD holder to the cage using the two provided screws.
2. Insert your Samsung T5 SSD into the holder and secure the USB-C cable to prevent accidental disconnection.

Figure 3.3: The SSD holder mounted on the cage, securing a Samsung T5 SSD.

3.4 Canllaw Fideo Gosod

4. Features and Usage

The SMALLRIG Camera Cage Kit KCVB2419 offers extensive features for professional video production:

• Pwyntiau Mowntio Lluosog: The cage features numerous 1/4"-20 and 3/8"-16 threaded holes, ARRI locating holes, NATO rails, and cold shoe mounts. These allow for the attachment of various accessories such as external monitors, microphones, LED lights, and more.
• Unobstructed Access: The cage design ensures full access to all camera buttons, ports (HDMI, USB-C, audio in), and the battery compartment, allowing for seamless operation without removing the camera from the cage.
• Enhanced Handheld Shooting: The included top handle provides a comfortable grip for handheld shooting, especially useful for low-angle shots. It can support the weight of a fully rigged camera setup.
• SSD Integration: The dedicated SSD holder securely mounts a Samsung T5 SSD, facilitating direct recording to external storage and protecting the USB-C cable connection.

Figure 4.1: The camera cage provides full access to all camera controls and ports.

Ffigur 4.2: Example of a fully rigged camera setup using the SmallRig cage, demonstrating various accessory attachments.

Figure 4.3: The camera cage with top handle and SSD holder attached, ready for use.

5. manylebau

Figure 5.1: Dimensional drawing of the SmallRig camera cage and top handle.

6. cynnal

To ensure the longevity and optimal performance of your SMALLRIG Camera Cage Kit, follow these maintenance guidelines:

• Glanhau: Wipe the cage and accessories with a soft, dry cloth to remove dust and debris. For stubborn dirt, use a slightly damp cloth and dry thoroughly. Avoid harsh chemicals or abrasive cleaners.
• Arolygiad: Regularly inspect all screws and mounting points for tightness. Re-tighten any loose connections to prevent accidental equipment damage.
• Storio: Store the cage kit in a clean, dry environment when not in use. If disassembled, keep all components together to avoid loss.

7. Datrys Problemau

If you encounter any issues with your SMALLRIG Camera Cage Kit, consider the following common solutions:

• Camera Movement within Cage: Ensure all 1/4"-20 screws securing the camera are fully tightened. Verify that the camera is correctly aligned with the locating pins and resting on the rubber pads.
• Ategolion Rhydd: Check that all accessories attached to the cage (e.g., top handle, SSD holder, monitors, lights) are securely fastened to their respective mounting points (NATO rail, cold shoe, threaded holes).
• Difficulty Attaching/Detaching Components: Ensure no debris is obstructing the mounting interfaces. Apply gentle, even pressure during assembly or disassembly. Do not force components.

Ar gyfer problemau parhaus, cyfeiriwch at y wybodaeth gymorth a ddarperir yn Adran 8.

8. Gwarant a Chefnogaeth

SMALLRIG products are manufactured to high-quality standards. For warranty information, product support, or to report any issues, please contact SMALLRIG customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, visit the official SMALLRIG website or contact their support team through the contact information provided with your product packaging.