Phanteks Eclipse P400A Digital ATX Mid-tower Instruction Manual

1. Rhagymadrodd

This manual provides detailed instructions for the Phanteks Eclipse P400A Digital ATX Mid-tower chassis. It covers essential information regarding the product's features, setup, operation, and maintenance to ensure optimal performance and longevity. The Eclipse P400A is designed for high airflow and features a full metal mesh front panel, tempered glass side panel, and integrated Digital-RGB lighting.

2. Nodweddion Allweddol

• Perfformiad Oeri Gorau posibl: Features an ultra-fine performance mesh front panel for maximum airflow and a tempered glass side panel.
• Mewnol Eang: Supports up to E-ATX motherboards, 280/360mm radiators in the front, and vertical GPU mounting (with optional bracket PH-VGPUKT_02).
• Integrated Digital-RGB Controller: Includes three pre-installed D-RGB fans that can sync with compatible motherboards for customizable lighting effects.
• Extensive Storage Options: Provides six HDD positions (two trays included) and eight SSD mounting locations (two dedicated brackets included).
• Easy Accessibility I/O: Front panel includes 2x USB 3.0 ports, microphone and headphone jacks, power button, reset button, and D-RGB controller.

3. Gosod a Gosod

Before beginning installation, ensure all components are accounted for and refer to your motherboard and component manuals for specific installation procedures. Always handle components with care and use anti-static precautions.

3.1 Unpacking the Chassis

Carefully remove the chassis from its packaging. Inspect for any damage during transit. Retain the packaging for future transport or storage.

Figure 3.1: Phanteks Eclipse P400A Digital ATX Mid-tower (White)

3.2 Tynnu Paneli Ochr

The tempered glass side panel is secured with thumbscrews. Carefully unscrew these and gently remove the panel. The opposite side panel can also be removed for cable management access.

3.3 Gosod Motherboard

1. Install the I/O shield into the rear opening of the chassis.
2. Align your ATX, micro-ATX, or mini-ITX motherboard with the pre-installed standoffs. For E-ATX motherboards up to 272mm wide, ensure optional HDD trays are not in use.
3. Sicrhewch y famfwrdd gyda'r sgriwiau a ddarperir.

3.4 Gosod Cydrannau

• Cerdyn Graffeg (GPU): Install your graphics card into the appropriate PCIe slot on the motherboard. The case supports GPUs up to 420mm in length. Vertical GPU mounting is supported with the optional PH-VGPUKT_02 bracket.
• Oerach CPU: Install your CPU cooler. The case accommodates CPU coolers up to 160mm in height.
• Gyriannau Storio: Utilize the dedicated SSD brackets and HDD trays for 2.5-inch and 3.5-inch drives respectively. The case offers extensive storage options with 6x HDD and 8x SSD mounting locations.
• Uned Cyflenwi Pŵer (PSU): Install the PSU in the designated compartment. The PSU clearance is 270mm.

3.5 Rheoli Ceblau

The chassis provides 25mm of space for cable management behind the motherboard tray. Utilize the included velcro ties and routing channels to organize cables for improved airflow and aesthetics.

4. Gweithrediad

4.1 Panel Mewnbwn/Allbwn Blaen

The top front panel provides convenient access to essential controls and ports:

• Botwm Pŵer: Pwyswch i droi eich system ymlaen neu i ffwrdd.
• Botwm Ailosod: Pwyswch i ailgychwyn eich system.
• Porthladdoedd USB 3.0 (x2): Connect USB 3.0 compatible devices for high-speed data transfer.
• Jack Meicroffon: Cysylltwch eich meicroffon.
• Jack Clustffon: Cysylltwch eich clustffonau neu'ch siaradwyr.
• D-RGB Controller Buttons: Used to cycle through various Digital-RGB lighting modes and colors for the pre-installed fans and compatible D-RGB products.

Figure 4.1: Front I/O Panel Overview

4.2 Digital-RGB Lighting Control

The integrated D-RGB controller allows for direct control of the lighting effects. Alternatively, if your motherboard supports Digital-RGB synchronization, you can connect the case's D-RGB cables to your motherboard's header and control lighting via motherboard software.

5. cynnal

5.1 Glanhau Hidlwyr Llwch

To maintain optimal airflow and cooling performance, regularly clean the dust filters. The front mesh panel is designed for easy removal and cleaning. Other filters, such as those for the top and bottom fan mounts, should also be checked and cleaned periodically.

1. Gently pull the front mesh panel to detach it.
2. Use a soft brush or compressed air to remove accumulated dust.
3. Reattach the panel securely.

5.2 Glanhau Cyffredinol

Wipe the exterior surfaces of the chassis with a soft, damp brethyn. Osgowch ddefnyddio cemegau llym neu ddeunyddiau sgraffiniol a allai niweidio'r gorffeniad neu'r gwydr tymherus.

6. Datrys Problemau

• Fans Not Spinning/RGB Not Lighting Up:
  • Ensure all fan power cables are securely connected to the motherboard fan headers or a fan controller.
  • Verify that the D-RGB cables are correctly connected to the integrated controller or the motherboard's D-RGB header.
  • Check your motherboard's BIOS/UEFI settings or RGB software for fan speed and lighting control.
• Llif Aer Gwael/Tymheredd Uchel:
  • Clean all dust filters, especially the front mesh panel.
  • Ensure fans are oriented correctly for optimal intake and exhaust.
  • Verify that there are no obstructions to airflow inside the case, such as poorly managed cables.
• Front I/O Ports Not Functioning:
  • Check that all front panel connectors (USB, audio, power, reset) are correctly plugged into the corresponding headers on your motherboard.

7. manylebau

8. Gwarant a Chefnogaeth

Specific warranty details are not provided in this document. For warranty information, technical support, or further assistance, please visit the official Phanteks website or contact their customer service directly. Ensure you have your product model number (PH-EC400ATG_DWT01) and proof of purchase available when seeking support.

Phanteks Swyddogol Websafle: www.phanteks.com