1. Rhagymadrodd
This manual provides instructions for the safe and effective operation, maintenance, and troubleshooting of the FLYLINKTECH 1500A Peak 20000mAh Car Jump Starter. Please read this manual thoroughly before using the product and retain it for future reference.
Image 1.1: FLYLINKTECH Car Jump Starter unit, smart clamps, charging cables, and storage case.
2. Cynnyrch Drosview
2.1 Cynnwys Pecyn
- FLYLINKTECH 1500A Peak 20000mAh Car Jump Starter Unit
- Intelligent Jumper Clamps
- Cebl Codi Tâl USB
- Cebl Codi Tâl Math-C
- Llawlyfr Defnyddiwr
- Achos Storio
Image 2.1: Visual representation of the product package contents.
2.2 Nodweddion Allweddol
- Cynhwysedd Uchel: 20000mAh battery for multiple jump starts and device charging.
- Dechrau Neidio Pwerus: 1500A peak current capable of starting 12V vehicles (all petrol engines or up to 7.0L diesel engines).
- Banc Pŵer Aml-swyddogaethol: Two Quick Charge 3.0 USB outputs (5V/3A, 9V/2A) for charging smartphones, tablets, and other USB-powered devices.
- Flashlight LED Argyfwng: Features Normal, SOS, and Strobe lighting modes.
- Sgôr gwrth-ddŵr IP68: Provides protection against water and dust ingress.
- System Diogelu Clyfar: Integrated intelligent clamps offer protection against over-discharge, short circuit, overload, overcurrent, reverse protection, over temperature, reverse polarity, and reverse connection.
2.3 Product Components and Controls
Delwedd 2.2: Drosoddview of the jump starter's buttons, ports, and indicators.
- ON/OFF Button (Multifunctional): Powers the unit on/off and controls flashlight modes.
- Goleuadau Dangosydd Codi Tâl: Four blue LEDs indicate the battery charge level.
- Output 1, QC3.0: USB-A port for quick charging external devices.
- Output 2, QC3.0: USB-A port for quick charging external devices.
- Mewnbwn Math C: USB-C port for charging the jump starter unit.
- Mewnbwn micro: Micro-USB port for charging the jump starter unit.
- Jump Starting Port: Dedicated port for connecting the intelligent jumper clamps.
- Flashlight: Golau LED integredig.
3. Gwybodaeth Diogelwch
Darllenwch yr holl rybuddion a chyfarwyddiadau diogelwch cyn defnyddio'r cynnyrch hwn. Gall methu â dilyn y rhybuddion a'r cyfarwyddiadau arwain at sioc drydanol, tân, a/neu anaf difrifol.
- Do not attempt to jump start a vehicle if the jump starter unit is below 50% charge.
- Sicrhewch y polaredd cywir wrth gysylltu'r siwmper clamps i'r batri cerbyd. Coch clamp to positive (+), Black clamp i negyddol(-).
- Peidiwch â chyffwrdd â'r cl coch a duampgyda'i gilydd ar ôl cysylltu â'r cychwynnydd neidio.
- Do not expose the product to extreme temperatures or direct sunlight for extended periods.
- Cadwch allan o gyrraedd plant.
- Do not disassemble, modify, or attempt to repair the unit.
- If the unit becomes excessively hot during use, discontinue use immediately.
- The intelligent clamps incorporate multiple protection features:
Delwedd 3.1: Drosoddview of the intelligent clamp's safety features.
- Diogelu Gor-Ryddhau
- Diogelu Cylchdaith Byr
- Amddiffyn Gorlwytho
- Diogelu Overcurrent
- Gwarchod Gwrthdroi
- Diogelu Dros Tymheredd
- Amddiffyn Polaredd Gwrthdroi
- Gwarchod Cysylltiad Gwrthdroi
4. Gosod
4.1 Gwefru'r Cychwynnydd Neidio
Before first use, fully charge the jump starter unit. It is recommended to charge the unit every 3-6 months to maintain battery health, even if not in use.
- Connect the provided USB or Type-C charging cable to the corresponding input port on the jump starter unit.
- Connect the other end of the charging cable to a USB wall adapter (not included) or a powered USB port.
- The charging indicator lights will illuminate and flash to show the charging progress. All four lights will be solid when fully charged.
5. Cyfarwyddiadau Gweithredu
5.1 Neidio Cychwyn Cerbyd
Ensure the jump starter unit has at least 50% charge before attempting to jump start a vehicle.
Image 5.1: The jump starter is suitable for various 12V vehicles, including cars, SUVs, vans, pickup trucks, motorcycles, and more.
- Diffoddwch danio'r cerbyd a'r holl ategolion.
- Connect the blue plug of the intelligent jumper clamps into the jump starting port on the jump starter unit. Ensure a firm connection.
- Cysylltwch y coch (+) clamp i derfynell bositif batri'r cerbyd.
- Cysylltwch y du (-) clamp i derfynell negyddol batri'r cerbyd.
- Unwaith y clamps are correctly connected, the indicator light on the intelligent clamps will turn green, indicating it is safe to proceed. If it shows red or flashes, check connections and refer to the troubleshooting section.
- Dechreuwch injan y cerbyd.
- Unwaith y bydd y cerbyd yn cychwyn, datgysylltwch ar unwaith du (-) clamp from the vehicle battery, followed by the coch (+) clamp.
- Disconnect the intelligent jumper clamps o'r uned cychwyn naid.
Image 5.2: Proper connection of jumper clamps to a vehicle battery.
5.2 Gwefru Dyfeisiau Allanol
The jump starter can function as a power bank to charge various USB-powered devices.
Image 5.3: The jump starter can charge devices like phones, tablets, and cameras.
- Connect your device's USB charging cable to one of the Quick Charge 3.0 USB output ports (Output 1 or Output 2) on the jump starter unit.
- Cysylltwch ben arall y cebl â'ch dyfais.
- The jump starter will automatically begin charging your device. The charging indicator lights will show the remaining battery level.
5.3 Defnyddio'r Fflacholau LED
The integrated LED flashlight offers multiple lighting modes for emergency situations or general illumination.
Image 5.4: The LED flashlight offers Normal, SOS, and Strobe modes.
- Press and hold the ON/OFF button for approximately 3 seconds to turn on the flashlight in Normal mode.
- Press the ON/OFF button briefly to cycle through the modes: Normal > SOS > Strobe > Off.
- To turn off the flashlight from any mode, press and hold the ON/OFF button for approximately 3 seconds.
6. cynnal
- Codi tâl: Recharge the jump starter unit every 3-6 months, even if not used, to prolong battery life.
- Glanhau: Sychwch yr uned gyda lliain meddal, sych. Peidiwch â defnyddio cemegau llym na glanhawyr sgraffiniol.
- Storio: Store the jump starter in its provided storage case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Gofal Batri: Avoid fully discharging the unit frequently, as this can reduce battery lifespan.
7. Datrys Problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Nid yw'r cychwynnydd neidio yn troi ymlaen. | Mae'r batri wedi'i ollwng yn llawn. | Charge the jump starter unit. |
| Vehicle does not start after jump starting attempt. | clamp cysylltiad. Batri'r cychwynnydd neidio yn rhy isel. Vehicle battery severely damaged. Problem cerbyd heb gysylltiad â'r batri | Gwiriwch clamp connections (red to +, black to -). Ensure jump starter is sufficiently charged (above 50%). Consult a mechanic if the issue persists. |
| Deallus clamp indicator light is red or flashing. | Reverse polarity, short circuit, or other protection activated. | Datgysylltu clamps from vehicle battery and jump starter. Re-check connections for correct polarity and ensure clamps are not touching. Refer to safety information. |
| Dyfais allanol ddim yn gwefru. | Batri'r cychwynnydd neidio yn rhy isel. Cysylltiad cebl anghywir. Dyfais ddim yn gydnaws. | Charge the jump starter. Ensure USB cable is properly connected to both the jump starter and the device. Try a different USB port or cable. |
Os yw'r broblem yn parhau ar ôl rhoi cynnig ar yr atebion hyn, cysylltwch â chymorth cwsmeriaid.
8. manylebau
| Nodwedd | Manyleb |
|---|---|
| Model | CF100 |
| Gallu Batri | 20000mAh |
| Cyfredol Uchaf | 1500A |
| Cychwyn Cyfredol | 750A |
| Cysondeb Cerbyd | 12V vehicles (All Petrol, up to 7.0L Diesel) |
| Allbwn USB 1 (QC3.0) | 5V/3A, 9V/2A |
| Allbwn USB 2 (QC3.0) | 5V/3A, 9V/2A |
| Mewnbwn USB-C | 5V/2A |
| Mewnbwn Micro-USB | 5V/2A |
| Graddfa dal dwr | IP68 |
| Moddau Flashlight LED | Normal, SOS, Strobe |
| Math Batri | Ion Lithiwm |
| Dimensiynau Cynnyrch (tua) | 183mm x 88mm x 36mm |
| Pwysau Eitem | 544g |
| Tystysgrifau Diogelwch | CE, FCC, RoHs, UL, UN38.3 |
9. Gwarant a Chefnogaeth
9.1 Gwybodaeth Gwarant
This FLYLINKTECH product comes with a Gwarant 24 mis o ddyddiad y pryniant. Mae'r warant hon yn cwmpasu diffygion gweithgynhyrchu a phroblemau sy'n deillio o ddefnydd arferol.
9.2 Cefnogaeth i Gwsmeriaid
If you have any questions, encounter problems during use, or require technical assistance, please contact our professional technical team. You can reach us through the Amazon purchase message system.
Our support team aims to respond and help resolve issues within 24 hours.
