VicTsing Wood Grain Essential Oil Diffuser User Manual

1. Rhagymadrodd

Thank you for choosing the VicTsing Wood Grain Essential Oil Diffuser. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new aromatherapy diffuser. Please read this manual thoroughly before using the product and retain it for future reference.

2. Cyfarwyddiadau Diogelwch

To ensure safe operation and prevent damage to the product or injury to yourself, please observe the following safety precautions:

• Rhowch y tryledwr bob amser ar arwyneb sefydlog, gwastad, sy'n gwrthsefyll dŵr.
• Do not place the diffuser near heat sources, direct sunlight, or on electronic devices.
• Use only clean tap water or distilled water. Do not use purified water or mineral water.
• Do not exceed the maximum water level indicated inside the water tank.
• Only use 100% pure, natural essential oils. Avoid corrosive or chemical-based oils.
• Cadwch allan o gyrraedd plant ac anifeiliaid anwes.
• Unplug the diffuser from the power outlet before cleaning or when not in use for extended periods.
• Do not touch the ultrasonic vibrating plate directly with your fingers or sharp objects.
• If the diffuser emits an unusual smell or sound, or if smoke appears, unplug it immediately.
• Peidiwch â rhwystro'r allfa niwl.

3. Cynnwys Pecyn

Gwiriwch gynnwys y pecyn wrth ddadbocsio:

• 1 x VicTsing Wood Grain Essential Oil Diffuser
• Addasydd 1 x AC
• Cwpan Mesur 1 x
• 1 x Llawlyfr Defnyddiwr

4. Cynnyrch Drosview

Familiarize yourself with the components of your diffuser:

Image 1: Components of the VicTsing Wood Grain Essential Oil Diffuser. This diagram illustrates the top cover, water tank, mist outlet, light button, mist button, and power input.

• Clawr Uchaf: Removable cover for accessing the water tank.
• Tanc Dŵr: Reservoir for water and essential oils.
• Allfa Niwl: Where the aromatherapy mist is released.
• Botwm Golau: Controls the LED light functions.
• Botwm Niwl: Controls the mist output and timer settings.
• Allfa Awyr: Ensures proper airflow.
• Mewnbwn pŵer: Yn cysylltu â'r addasydd AC.
• Ultrasonic Plate: Located at the bottom of the water tank, responsible for mist generation.

5. Gosod

Dilynwch y camau hyn ar gyfer gosod cychwynnol:

1. Rhowch y tryledwr ar arwyneb gwastad, sefydlog.
2. Remove the top cover by lifting it upwards.
3. Connect the AC adapter to the power input port at the bottom of the diffuser. Then, plug the adapter into a wall outlet.
4. Using the measuring cup, fill the water tank with clean tap water or distilled water up to the maximum water level line (150ml). Do not overfill.
5. Add 3-5 drops of 100% pure essential oil directly into the water tank. Adjust the amount based on personal preference and room size.
6. Replace the top cover, ensuring it is securely seated.

Image 2: Setup process for the VicTsing Wood Grain Essential Oil Diffuser. This image shows the steps of removing the cover, adding water and essential oil, and replacing the cover.

6. Cyfarwyddiadau Gweithredu

Once set up, operate your diffuser using the two buttons:

Mist Button (Left Button)

• Gwasg 1af: Continuous mist mode. The diffuser will operate until the water runs out.
• 2il Wasg: 1-hour timer mode. The diffuser will operate for 1 hour and then automatically shut off.
• 3ydd Wasg: 3-hour timer mode. The diffuser will operate for 3 hours and then automatically shut off.
• 4ydd Wasg: 6-hour timer mode. The diffuser will operate for 6 hours and then automatically shut off.
• 5ydd Wasg: Turn off the mist function.
• The diffuser features an automatic shut-off function when water runs out, regardless of the timer setting.

Light Button (Right Button)

• Gwasg 1af: Turn on the LED light, which will cycle through 8 colors automatically.
• 2il Wasg: Fix the light to its current color.
• Subsequent Presses: Cycle through the 8 available colors to select your desired fixed color.
• Gwasg Hir (2 eiliad): Turn off the light function.

7. cynnal

Regular cleaning helps ensure optimal performance and extends the lifespan of your diffuser. Clean the diffuser after every 5-6 uses or every 3-5 days.

1. Tynnwch y plwg y tryledwr o'r allfa bŵer.
2. Remove the top cover and drain any remaining water from the water tank. Ensure to drain from the side opposite the air outlet to prevent water from entering internal components.
3. Add a small amount of warm water (not hot) and 1-2 drops of neutral detergent to the water tank.
4. Gently wipe the inside of the water tank and the ultrasonic plate with a soft cloth or cotton swab. Do not scrub aggressively.
5. Rinse the water tank with clean water, again avoiding the air outlet side.
6. Sychwch du allan y tryledwr gyda lliain meddal, sych.
7. Gadewch i bob rhan sychu'n llwyr yn yr awyr cyn ail-ymgynnull neu ei storio.

Pwysig: Do not use corrosive cleaners, alcohol, or harsh chemicals. Do not immerse the diffuser base in water.

8. Datrys Problemau

If you encounter issues with your diffuser, please refer to the following common problems and solutions:

9. manylebau

10. Gwarant a Chefnogaeth

VicTsing products are designed and manufactured to the highest quality standards. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or visit the official VicTsing website. Please have your product model name and purchase date available when contacting support.