FLYLINKTECH Battery Jump Starter User Manual

Rhagymadrodd

Thank you for choosing the FLYLINKTECH Battery Jump Starter. This portable device is designed to provide a powerful boost to your vehicle's battery, act as a portable power bank for electronic devices, and offer an integrated LED flashlight for emergencies. Please read this manual thoroughly before using the product to ensure safe and optimal performance.

Gwybodaeth Diogelwch

Always observe the following safety precautions to prevent injury or damage to the device or vehicle:

• Peidiwch â cheisio neidio cychwyn batri wedi'i rewi.
• Ensure proper polarity connection (positive to positive, negative to negative) to avoid sparks or damage.
• Peidiwch â chaniatáu y coch a du clamps cyffwrdd â'i gilydd.
• Cadwch y ddyfais i ffwrdd oddi wrth blant.
• Do not expose the device to rain or extreme temperatures.
• Storio mewn lle oer, sych pan nad yw'n cael ei ddefnyddio.
• Os bydd y batri clamps are connected incorrectly, the smart cable will typically alert you with an indicator light or sound. Disconnect immediately and re-connect correctly.
• Datgysylltwch y clamps from the vehicle battery first, then from the jump starter, after a successful jump start.

Cynnwys Pecyn

Gwiriwch fod yr holl eitemau yn bresennol yn eich pecyn:

• FLYLINKTECH Battery Jump Starter Unit
• Ceblau Neidiwr Clyfar gyda Clamps (Coch a Du)
• Cebl Codi Tâl USB
• EC5 Car Cigarette Lighter Adapter
• Llawlyfr Defnyddiwr (y ddogfen hon)

Image: The FLYLINKTECH Battery Jump Starter unit, black with red accents, shown alongside its accessories: smart jumper cables (red and black clamps), a USB charging cable, and an EC5 car cigarette lighter adapter.

Cynnyrch Drosview

Familiarize yourself with the main components of your jump starter:

• Botwm Pŵer: Activates the unit and checks battery level.
• Goleuadau Dangosydd LED: Show the remaining battery capacity (e.g., 4 lights for full charge).
• Porthladd Cychwyn Neidio: Connects to the smart jumper cables.
• Porthladdoedd Allbwn USB: For charging mobile phones, tablets, and other USB-powered devices.
• Porthladd Mewnbwn Micro USB: Ar gyfer gwefru'r uned cychwyn neidio.
• Flashlight LED: Golau integredig ar gyfer goleuo.

Gosod

Codi Tâl Cychwynnol

Before first use, fully charge the jump starter. It is recommended to charge the unit every 3-6 months to maintain battery health, even if not in use.

1. Connect the Micro USB end of the provided USB charging cable to the jump starter's input port.
2. Connect the USB-A end of the cable to a 5V/2A USB wall adapter (not included) or a computer USB port.
3. The LED indicator lights will flash during charging and remain solid when fully charged.

Cyfarwyddiadau Gweithredu

Neidio Cychwyn Cerbyd

Ensure the jump starter is at least 50% charged (at least 2 LED indicator lights are solid) before attempting a jump start.

1. Turn off the vehicle's ignition and all accessories (lights, radio, A/C).
2. Cysylltwch y cl coch (positif, +)amp of the smart jumper cables to the positive (+) terminal of the vehicle's battery.
3. Cysylltwch y cl du (negatif, -)amp of the smart jumper cables to the negative (-) terminal of the vehicle's battery.
4. Plug the blue connector end of the smart jumper cables into the jump start port on the jump starter unit. Ensure a firm connection.
5. Check the indicator light on the smart jumper cable. A solid green light indicates a correct connection and readiness to jump start. If it's red or flashing, check connections and polarity.
6. Start the vehicle's engine. If it doesn't start immediately, wait 30 seconds and try again. Do not crank for more than 3 seconds per attempt.
7. Once the vehicle starts, immediately disconnect the blue connector from the jump starter unit.
8. Yna, datgysylltwch y cl du (-)amp from the vehicle battery, followed by the red (+) clamp.

Defnyddio fel Banc Pŵer Cludadwy

Gall y cychwynnydd neidio wefru amrywiol ddyfeisiau electronig trwy ei borthladdoedd allbwn USB.

1. Cysylltwch gebl gwefru USB eich dyfais ag un o'r porthladdoedd allbwn USB ar y cychwynnydd neidio.
2. Press the power button on the jump starter to begin charging. The LED indicator lights will show the remaining battery level.
3. Disconnect your device once charging is complete. The jump starter will automatically turn off after a period of inactivity.

Gan ddefnyddio'r Flashlight LED

The integrated LED flashlight has multiple modes for different situations.

1. Press and hold the power button for approximately 3 seconds to turn on the flashlight.
2. Press the power button again to cycle through modes: Solid light > SOS signal > Strobe light.
3. Press and hold the power button again for 3 seconds to turn off the flashlight.

Cynnal a chadw

• Ail-godi: Recharge the unit after each jump start. For optimal battery life, recharge every 3-6 months even if not used.
• Glanhau: Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
• Storio: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures.

Datrys problemau

Manylebau

• Brand: FLYLINKTECH
• Model: CF200
• Uchafbwynt Cyfredol: 1500A
• Gweithredu Ampdileu: 1000 Amps
• Math o batri: 12V (included)
• Cydnawsedd injan: Up to 6.0L Gas or 5.0L Diesel engines
• Dimensiynau Cynnyrch: 6.22 x 3.35 x 0.83 modfedd
• Pwysau Eitem: 1.7 pwys
• UPC: 886871087216

Note: The 1500A peak current refers to the maximum instantaneous current the unit can deliver. The operating amperage is typically lower.

Gwarant a Chefnogaeth

FLYLINKTECH products are manufactured to the highest quality standards. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or visit the official FLYLINKTECH website. Please have your model number (CF200) and purchase date ready when contacting support.