Llawlyfr Defnyddiwr

1. Cynnyrch Drosview

The Symcode 2D Bluetooth Ring Barcode Scanner is a wearable, wireless, and compact device designed for efficient barcode reading. Its ring design allows for comfortable wear on the finger, enhancing user satisfaction and productivity. This scanner supports a wide range of 1D and 2D barcodes and offers versatile connectivity options for various operating systems and devices.

Figure 1: Symcode 2D Bluetooth Ring Barcode Scanner

2. Cynnwys Pecyn

Wrth agor y pecyn, gwiriwch fod yr holl eitemau a restrir isod yn bresennol ac mewn cyflwr da:

• 1 x Mini Barcode Scanner
• 1 x English Version User Manual
• 1 x Cebl USB
• 1 x Charger Head
• 1 x Mobile Phone 4.0 Receiver (Bluetooth Dongle)

Ffigur 2: Cynnwys Pecyn

3. Nodweddion

• Wearable Ring Design: Allows for comfortable use on the finger, left or right, increasing satisfaction and comfort during extended use.
• Cysylltedd Di-wifr Deuol: Supports both 2.4G Wireless (via dongle) and Bluetooth 4.0 for flexible connection to various devices.
• Cydnawsedd Eang: Compatible with Microsoft Windows XP/7.0/8.0/10, Android, and iOS devices.
• Extensive Barcode Support: Scans 1D codes (UPC, EAN, Code128, Code39, Code11, Interleaved 2 of 5, Codabar, etc.) and 2D codes (PDF417, Data Matrix, QR Code, etc.).
• Pellter Trosglwyddo Hir: Up to 30 feet (10m) for Bluetooth and up to 492ft (150m) in barrier-free environments for 2.4G wireless.
• Dau ddull uwchlwytho: Supports Instant Upload Mode (synchronous data upload) and Storage Mode (stores up to 50,000 barcodes in 512KB memory for later upload).
• Batri Parhaol: Provides up to 6 hours of continuous scanning and a standby time of up to 720 hours. Fully recharges in approximately 1.5 hours.

4. Gosod

4.1 Gwefru'r Sganiwr

Before initial use, fully charge the scanner using the provided USB cable and charger head. Connect the USB cable to the scanner's charging port and the other end to a power source. The charging indicator light will show the charging status.

Figure 3: Battery Information

4.2 Cysylltu â Dyfais

The scanner offers two primary connection methods: 2.4G Wireless via dongle and Bluetooth 4.0.

4.2.1 Cysylltiad Di-wifr 2.4G (trwy Dongle)

1. Plug the 2.4G wireless receiver (dongle) into an available USB port on your laptop, PC, or POS system.
2. Trowch y sganiwr cod bar ymlaen. Dylai baru'n awtomatig â'r dongl.
3. A successful connection will be indicated by a specific sound or light on the scanner.

4.2.2 Cysylltiad Bluetooth 4.0

1. Ensure Bluetooth is enabled on your mobile phone, tablet, or computer.
2. Trowch y sganiwr cod bar ymlaen.
3. On your device, search for available Bluetooth devices. The scanner should appear as "Barcode Scanner HID" or similar.
4. Select the scanner to pair. A successful connection will be indicated by a specific sound or light on the scanner.

Ffigur 4: Dewisiadau Cysylltiad Di-wifr

Figure 5: Transmission Distance

5. Cyfarwyddiadau Gweithredu

5.1 Wearing the Scanner

The ring scanner is designed to be worn on your finger. Adjust the strap for a comfortable and secure fit. The scanner head can be rotated 180 degrees to accommodate different scanning angles and user preferences.

Figure 6: 180 Degree Rotation

Figure 7: Ergonomic Use

5.2 Sganio Codau Bar

Once connected, point the scanner's laser at the barcode you wish to scan and press the trigger button. The scanner will emit a beep and/or flash to indicate a successful scan. The scanned data will appear on your connected device.

5.3 Moddau Llwytho i Fyny

Mae'r sganiwr yn cefnogi dau ddull uwchlwytho data:

• Modd Uwchlwytho ar Unwaith: Data is synchronously uploaded to your device as soon as a barcode is scanned. This is ideal for real-time inventory management or POS systems.
• Modd Storio: Barcode data is stored in the scanner's internal memory (up to 512KB, capable of holding over 50,000 barcodes). This mode is useful when working out of range of your device. Data can be uploaded later when a connection is re-established. Refer to the included user manual for specific instructions on switching between modes and uploading stored data.

Figure 8: Two Upload Modes

6. manylebau

7. cynnal

To ensure the longevity and optimal performance of your Symcode barcode scanner, follow these maintenance guidelines:

• Glanhau: Defnyddiwch frethyn meddal, sych i lanhau tu allan y sganiwr. Ar gyfer y ffenestr sganio, defnyddiwch frethyn glanhau lens i osgoi crafiadau. Peidiwch â defnyddio glanhawyr sgraffiniol na thoddyddion.
• Storio: Storiwch y sganiwr mewn lle oer, sych i ffwrdd o olau haul uniongyrchol a thymheredd eithafol.
• Gofal Batri: Avoid fully discharging the battery frequently. Recharge the scanner when the battery low indicator appears. If storing for an extended period, charge the battery to about 50% and recharge every few months.
• Trin: Handle the scanner with care. Avoid dropping it or subjecting it to strong impacts, as this can damage internal components.

8. Datrys Problemau

If you encounter issues with your scanner, please refer to the following common troubleshooting steps:

• Sganiwr ddim yn troi ymlaen: Ensure the battery is charged. Connect the scanner to the charger and try again.
• Dim data wedi'i drosglwyddo ar ôl sganio: Verify that the scanner is properly connected to your device (Bluetooth or 2.4G wireless). Check the device's input settings to ensure it's ready to receive data.
• Methu paru drwy Bluetooth: Ensure the scanner is in pairing mode. On your device, try forgetting the scanner and re-pairing. Make sure no other Bluetooth devices are interfering.
• Poor scanning performance: Ensure the barcode is clean and not damaged. Adjust the distance and angle of the scanner to the barcode. Check for sufficient lighting.
• Allbwn data anghywir: Verify the scanner's configuration settings. You may need to scan specific configuration barcodes from the full user manual to adjust settings like prefix/suffix or data format.

For more detailed troubleshooting or issues not covered here, please consult the comprehensive user manual included in your package or contact Symcode customer support.

9. Gwarant a Chefnogaeth

Symcode products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Symcode website. For technical support, product inquiries, or service requests, please contact Symcode customer service through the channels provided on their official websafle neu'r pecyn cynnyrch.

Visit the official Symcode Store for more products and support: Symcode Amazon Store

Additional resources may be available on the manufacturer's websafle: www.cnlhwood.com