Ohaus CR5200 Compass Series Portable Balance User Manual

1. Rhagymadrodd

This manual provides instructions for the proper setup, operation, and maintenance of your Ohaus CR5200 Compass Series Portable Balance. Please read this manual thoroughly before using the balance to ensure correct operation and to prevent damage.

The Ohaus CR5200 is a portable digital balance designed for accurate weighing with a capacity of 5200 grams and a readability of 1 gram. It supports multiple weighing units including grams (g), ounces (oz), pounds:ounces (lb:oz), troy ounces (ozt), and pennyweights (dwt).

Delwedd 1.1: Top view of the Ohaus CR5200 Compass Series Portable Balance, showing the display and control buttons.

2. Gwybodaeth Diogelwch

• Operate the balance on a stable, level surface free from vibrations and drafts.
• Osgowch amlygu'r cydbwysedd i dymheredd eithafol, lleithder, neu olau haul uniongyrchol.
• Do not overload the balance beyond its maximum capacity of 5200 grams.
• Keep the balance clean and free from dust and debris.
• Use only the specified power source (3 AA batteries or compatible AC adapter).

3. Gosod

3.1 Dadbacio

Carefully remove the balance from its packaging. Inspect the balance for any signs of damage. Retain the packaging for future transport or storage.

3.2 Powering the Balance

The Ohaus CR5200 can be powered by three AA alkaline batteries or an external AC adapter (not included, but compatible with the side power port).

Gosod Batri:

1. Locate the battery compartment on the underside of the balance.
2. Agorwch y clawr adran batri.
3. Insert three AA alkaline batteries, ensuring correct polarity (+/-).
4. Caewch y clawr adran batri yn ddiogel.

Delwedd 3.1: Ochr Isaf view of the balance with the battery compartment open, showing three AA batteries installed.

Cysylltiad Pŵer Allanol:

If using an AC adapter, connect it to the power input port located on the side of the balance. Ensure the adapter meets the specified voltage and current requirements (e.g., 12V 0.5A).

Delwedd 3.2: Ochr view of the balance, highlighting the external power input port.

3.3 Lleoliad

Place the balance on a firm, level, and stable surface. Avoid locations near air vents, windows, or equipment that generates vibrations or electromagnetic interference.

4. Cyfarwyddiadau Gweithredu

4.1 Pŵer Ymlaen/Diffodd

• I droi ymlaen: Pwyswch y [YMLAEN / I FFWRDD] button. The display will show a self-test sequence and then settle at 0.0 g.
• I ddiffodd y pŵer: Pwyswch a daliwch y [YMLAEN / I FFWRDD] botwm nes bod yr arddangosfa wedi diffodd.

4.2 Selecting Weighing Units

The balance supports multiple weighing units: grams (g), ounces (oz), pounds:ounces (lb:oz), troy ounces (ozt), and pennyweights (dwt).

• To change the weighing unit: Press the [UNED] button (often labeled with 'g' and an arrow). Each press cycles through the available units.

4.3 Swyddogaeth Tare

The tare function allows you to zero out the weight of a container, so only the weight of the contents is measured.

1. Place the empty container on the weighing pan. The display will show its weight.
2. Gwasgwch y [TARE/ZERO] button (often labeled with '→0←'). The display will reset to 0.0.
3. Add the material to be weighed into the container. The display will show the net weight of the material.

Image 4.1: The balance with an empty bowl on the weighing pan, ready for the tare function.

4.4 Pwyso Sylfaenol

1. Ensure the balance is powered on and the display shows 0.0 in the desired weighing unit.
2. Rhowch yr eitem i'w phwyso yn ofalus yng nghanol y badell bwyso.
3. Arhoswch i'r arddangosfa sefydlogi. Bydd y pwysau sefydlog yn cael ei ddangos.
4. Remove the item from the pan.

4.5 Calibradu Allanol

The Ohaus CR5200 features external calibration. This process requires a known calibration weight (not included) to ensure accuracy. Refer to the full Ohaus CR Series manual for detailed calibration procedures specific to your model.

Image 4.2: The balance with a cylindrical calibration weight placed on the weighing pan.

5. cynnal

5.1 Glanhau

• Wipe the balance exterior with a soft, damp brethyn. Peidiwch â defnyddio glanhawyr neu doddyddion sgraffiniol.
• Ensure no liquids enter the balance housing or display.
• Keep the weighing pan clean to ensure accurate readings.

5.2 Batri Newydd

When the battery indicator appears on the display, replace the three AA alkaline batteries as described in Section 3.2.

5.3 Storio

When not in use for extended periods, remove the batteries to prevent leakage. Store the balance in a dry, dust-free environment. The Ohaus CR5200 is designed for portability and can be stored in a protective case (if available).

Image 5.1: The Ohaus CR5200 balance shown alongside its protective carrying case.

6. Datrys Problemau

7. manylebau

8. Gwarant a Chefnogaeth

For warranty information, technical support, or service inquiries, please contact Ohaus customer service or visit the official Ohaus websafle. Cadwch eich derbynneb prynu fel prawf o brynu.