Hilitand YYB-5 12V/24V Forward/Reverse Motor Control Board User Manual

1. Rhagymadrodd

This manual provides comprehensive instructions for the Hilitand YYB-5 Two-Relay Timing Module. This versatile control board is designed for precise control of various electrical loads, including forward/reverse motor operations, solenoid valves, pumps, and lighting systems. It features a wide time range and robust power output capabilities, making it suitable for a multitude of industrial and hobbyist applications.

Ffigur 1: Ongl view of the Hilitand YYB-5 module, showing the relays, terminal blocks, display, and control buttons.

2. Nodweddion Allweddol

• Types of Functions: The module features 6 types of commonly used functions to meet the requirements of various applications.
• Cais Eang: The control board can manage 2-way solenoid valves, pumps, motors, lights, and other freely operating loads.
• Ystod Amser: The module's time range extends from 0.1 seconds to 999 minutes, adjustable at any time.
• Allbwn Pwer: The motor control board can manage DC or AC loads up to 30A.
• Good Performance: The module offers good performance, is easy to install, and has a long service life.

Ffigur 2: Drosoddview image of the Hilitand YYB-5 Motor Relay Delay Module, emphasizing its 6 types of commonly used functions.

3. Manylebau Technegol

Figure 3: Dimensional drawing of the Hilitand YYB-5 motor control board, showing length, width, and height in millimeters and inches.

4. Gosod a Gwifro

Proper wiring is crucial for the safe and correct operation of the YYB-5 module. Always ensure the power supply is disconnected before making any connections.

4.1 Cysylltiad Cyflenwad Pŵer

Connect your 12V or 24V DC power supply to the designated terminals on the module. Observe correct polarity (positive to '+' and negative to '-'). The module supports both 12V and 24V DC input.

4.2 Load Connections (Motor, Solenoid, Lights)

The module features two independent relays, each with Common (COM), Normally Open (NO), and Normally Closed (NC) terminals. These allow for flexible control of various loads, including forward/reverse motor applications.

• Rheolaeth Modur: For forward/reverse motor control, connect the motor to the relay outputs as shown in Figure 4. This configuration allows the module to switch the motor's direction.
• General Loads: For other loads like solenoid valves or lights, connect the load to the COM and either NO or NC terminals of a relay, depending on whether you want the load to be ON when the relay is activated (NO) or OFF (NC).

Figure 4: Wiring diagram for connecting a motor to the Hilitand YYB-5 module, illustrating power supply, load 1, load 2, and motor connections.

Figure 5: Detailed wiring diagram for the Hilitand YYB-5 module, showing connections for DC/AC power, signal/button inputs, and relay outputs (COM, NO, NC) for two loads.

4.3 Mewnbwn Arwyddion

The module may include terminals for external signal inputs or buttons (e.g., IN1, IN2, IN3, GND) to trigger specific functions or modes. Refer to the detailed programming guide for specific connections related to these inputs.

5. Cyfarwyddiadau Gweithredu

The Hilitand YYB-5 module is highly programmable, offering 6 distinct operating modes. Programming is typically done via the onboard display and buttons (SET, +, -, KEY).

5.1 Module Functions

The 6 functions allow for various timing and control scenarios, such as delay ON, delay OFF, cycle timing, and more complex sequences for motor control. Each function will have specific parameters to set (e.g., time duration, number of cycles).

Figure 6: Image of the Hilitand YYB-5 module highlighting its capability to control 2-way solenoid valves, pumps, motors, and lights.

5.2 Programming the Module

While specific programming steps vary by function, the general process involves:

1. Rhowch y Modd Rhaglennu: Press and hold the 'SET' button until the display changes, indicating entry into programming mode.
2. Dewiswch Swyddogaeth: Use the '+' and '-' buttons to cycle through the available functions (e.g., P-1, P-2, etc.). Press 'SET' to confirm your selection.
3. Gosod Paramedrau: For the selected function, use the '+' and '-' buttons to adjust time values (e.g., ON time, OFF time) or other parameters. The 'KEY' button might be used to switch between setting different parameters or digits.
4. Cadw Gosodiadau: Once all parameters are set, press and hold the 'SET' button again to save the configuration and exit programming mode.

For detailed instructions on each of the 6 functions and their specific parameter settings, please refer to the comprehensive programming guide available from the manufacturer or product support resources.

6. cynnal

The Hilitand YYB-5 module is designed for long-term reliability with minimal maintenance. Follow these guidelines to ensure optimal performance:

• Cadw'n lân ac yn sych: Protect the module from dust, dirt, and moisture. Avoid operating in environments with excessive humidity or corrosive substances.
• Archwilio Cysylltiadau: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent operation or damage.
• Osgoi Sioc Corfforol: Triniwch y modiwl yn ofalus i atal difrod corfforol.
• Awyru: Ensure adequate airflow around the module, especially if operating at higher loads, to prevent overheating.

7. Datrys Problemau

If you encounter issues with your Hilitand YYB-5 module, consider the following troubleshooting steps:

• Modiwl Ddim yn Pweru Ymlaen:
  • Gwiriwch y cyflenwad pŵer cyftage (12V or 24V DC) is correct.
  • Check power supply connections for correct polarity and secure contact.
  • Ensure the power supply is functional.
• Load Not Activating/Deactivating:
  • Check the wiring of the load to the relay terminals (COM, NO, NC).
  • Verify the load itself is functional and within the module's 30A current rating.
  • Review the programmed function and parameters to ensure they match your desired operation.
• Amseriad anghywir:
  • Re-enter programming mode and verify all time settings.
  • Ensure the time unit (seconds, minutes) is correctly configured if applicable.
• Botymau nad ydynt yn ymateb:
  • Ensure the module is powered correctly.
  • Gently press buttons to ensure they are not stuck.

If problems persist after following these steps, please contact Hilitand customer support for further assistance.

8. Gwarant a Chefnogaeth

For information regarding product warranty, returns, or technical support, please refer to the documentation provided at the time of purchase or contact Hilitand directly through their official website or customer service channels. Please have your product model (YYB-5) and ASIN (B07QCS3D6V) available when seeking support.