1. Rhagymadrodd
Thank you for choosing the PHILIPS Stellar Bright 16W LED Bulb. This manual provides essential information for the safe and efficient use of your new LED bulbs. These bulbs are designed for indoor use, offering cool daylight illumination with energy-efficient LED technology.
The image displays the PHILIPS Stellar Bright 16W LED Bulb alongside its retail packaging. The packaging highlights key features such as 82% energy saving and EyeComfort Technology. The bulb itself is a standard A-shape with a B22 base.
2. Gwybodaeth Diogelwch
- Always turn off the power supply before installing, removing, or cleaning the bulb.
- Do not use if the bulb or its packaging appears damaged.
- Mae'r bylbyn hwn wedi'i gynllunio ar gyfer defnydd dan do yn unig.
- Peidiwch â cheisio dadosod na newid y bwlb. Nid oes unrhyw rannau y gall y defnyddiwr eu gwasanaethu y tu mewn.
- Ensure the bulb is securely screwed into the fixture to prevent accidental detachment.
- This bulb is non-dimmable. Do not use with dimmer switches, as this may cause damage or malfunction.
- Cyfrol weithredoltage is 220-240 volts. Ensure your fixture's voltage matches this requirement.
3. Gosod a Gosod
3.1 Dadbacio
Carefully remove the LED bulbs from their packaging. Inspect each bulb for any visible damage before installation.
3.2 Camau Gosod
- Trowch Pŵer i ffwrdd: Locate the light switch or circuit breaker controlling the fixture where the bulb will be installed and turn it off.
- Paratoi Gosodiad: If replacing an old bulb, allow it to cool completely before carefully unscrewing it from the fixture.
- Gosod Bwlb Newydd: Gently screw the PHILIPS Stellar Bright 16W LED Bulb into the B22D base socket. Turn clockwise until it is snug, but do not overtighten.
- Adfer Pwer: Turn the power supply back on at the switch or circuit breaker.
A close-up view of the PHILIPS Stellar Bright 16W LED Bulb, highlighting its standard A-shape and B22D bayonet cap base, ready for installation.
4. Cyfarwyddiadau Gweithredu
Operating the PHILIPS Stellar Bright 16W LED Bulb is straightforward:
- Pŵer ymlaen / i ffwrdd: Use your standard wall switch to turn the light on or off.
- Heb fod yn pylu: This LED bulb is designed to operate at full brightness only and is not compatible with dimmer switches. Using it with a dimmer may lead to flickering, reduced lifespan, or damage to the bulb.
This graphic illustrates the main benefits of the PHILIPS Stellar Bright 16W LED Bulb, including up to 82% energy saving, 16W power consumption, LED technology, and EyeComfort Technology for reduced eye strain.
5. cynnal
The PHILIPS Stellar Bright 16W LED Bulb requires minimal maintenance:
- Glanhau: Ensure the power is off and the bulb is cool before cleaning. Use a soft, dry, lint-free cloth to wipe the bulb. Do not use liquid or abrasive cleaners.
- Amnewid: When the bulb reaches the end of its operational life, replace it with a new PHILIPS Stellar Bright 16W LED Bulb or an equivalent LED bulb with a B22D base.
An image showing the PHILIPS Stellar Bright LED Bulb installed in a wall fixture, illuminating a modern living space with soft, eco-friendly light. The room features a sofa with cushions and a minimalist design.
6. Datrys Problemau
If you encounter issues with your PHILIPS Stellar Bright 16W LED Bulb, refer to the following common problems and solutions:
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Nid yw bwlb yn goleuo | Dim pŵer i'r gêm Bulb not screwed in properly Bwlb diffygiol Gosodiad diffygiol | Check the light switch and circuit breaker. Ensure the bulb is securely tightened in the socket. Replace the bulb with a known working one. Have the fixture inspected by a qualified electrician. |
| Fflachiadau bylbiau | Wedi'i ddefnyddio gyda switsh pylu Cysylltiad rhydd Cyftage amrywiadau | Remove from dimmer circuit; this bulb is non-dimmable. Gwnewch yn siŵr bod y bwlb wedi'i dynnhau'n ddiogel. Ymgynghorwch â thrydanwr os yw'n llawntagmae problemau'n parhau. |
| Light output is low | Wat bwlb anghywirtage for desired brightness Dust or dirt on bulb/fixture | Ensure the 16W bulb meets your brightness requirements. Clean the bulb and fixture as per maintenance instructions. |
The PHILIPS Stellar Bright LED Bulb is shown installed in an outdoor fixture, casting bright, high-quality light over the entrance of a building, demonstrating its suitability for various lighting needs.
7. manylebau
Detailed technical specifications for the PHILIPS Stellar Bright 16W LED Bulb:
| Nodwedd | Manyleb |
|---|---|
| Brand | PHILIPS |
| Enw Model | StellarBright |
| Rhif Model | 929001818814_6 |
| Math Golau | LED |
| Wattage | 16 Wat |
| Sylfaen Bylbiau | B22D |
| Lliw Ysgafn | Golau Dydd Cwl |
| Tymheredd Lliw | 6500 Kelvin |
| Vol Gweithredutage | 220-240 folt |
| Light Output (Maximum) | 1440 o Lumens |
| Effeithlonrwydd | 90 lumens per watt, Energy Efficient |
| Bywyd Gweithredu Ffynhonnell Ysgafn | 15,000 Awr |
| Nodwedd Arbennig | Energy Efficient, Non Dimmable |
| Math o Ddeunydd | Pholycarbonad (PC) |
| Defnydd Awyr Agored Dan Do | Dan do |
| Number of Items (in pack) | 6 Cyfrif |
| Item Weight (for pack) | 480 gram |
This image depicts a family, including parents and children, comfortably relaxing in a bedroom illuminated by the PHILIPS Stellar Bright LED Bulb. The lighting is designed to be gentle on the eyes, promoting well-being.
8. Gwarant a Chefnogaeth
8.1 Gwybodaeth Gwarant
This PHILIPS Stellar Bright 16W LED Bulb comes with a Gwarant 2 mlynedd on the product from the date of invoice. Please retain your purchase receipt as proof of purchase for warranty claims.
8.2 Manufacturer and Importer Contact
For support, warranty claims, or further inquiries, please contact:
Gwneuthurwr: Signify Innovations India Limited (formerly known as Philips Lighting India Limited)
PS ARCADIA CENTRAL, 3A, 3rd floor, 4A, Abanindranath Thakur Sarani (Camac Street), Kolkata – 700 017, India
Mewnforiwr: Signify Innovations India Limited
PS Arcadia Central, 3A, 3rd Floor, 4A, Abanindranath Thakur Sarani (Camac Street), Kolkata-700017, West Bengal, India