ALEKO AR3350

ALEKO AR3350 Gear Driven Sliding Gate Opener Instruction Manual

Model: AR3350

1. Cynnyrch Drosview

The ALEKO AR3350 is a gear-driven sliding gate opener designed for gates weighing up to 3300 pounds. It operates on a 110-volt, 60 Hz single-phase motor. This opener features automatic stop upon obstruction, an automatic close function, integrated overheat protection, and supports up to 40 remote controls.

ALEKO AR3350 Gear Driven Sliding Gate Opener, front view

Delwedd: Blaen view of the ALEKO AR3350 Gear Driven Sliding Gate Opener, showing the motor housing and exposed gear mechanism.

2. Gwybodaeth Diogelwch

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in serious injury or property damage.

  • Gwnewch yn siŵr bod pob cysylltiad trydanol yn cael ei wneud gan drydanwr cymwys a'i fod yn cydymffurfio â chodau lleol.
  • Cadwch ddwylo a dillad yn glir o'r giât a'r mecanwaith agor yn ystod y llawdriniaeth.
  • Do not allow children to play near the gate or operate the remote controls.
  • Archwiliwch y giât a'r agorwr yn rheolaidd am arwyddion o draul, difrod neu gamliniad.
  • Os bydd methiant pŵer, defnyddiwch yr allwedd rhyddhau â llaw i weithredu'r giât.

3. Cynnwys Pecyn

Gwiriwch fod yr holl gydrannau yn bresennol yn y pecyn:

  • (1) ALEKO AR3350 Sliding Gate Opener
  • (2) Operator Mounting Plates
  • (4) Anchor Bolts
  • (2) Magnetau
  • (1) High and Low Bracket
  • (1) Bloc
  • (2) Release Keys
  • (2) Remote Controls

Note: Gear racks for the gate are sold separately and are required for operation.

Manual release key for ALEKO AR3350

Image: Manual release key.

Remote control for ALEKO AR3350 gate opener

Image: Remote control unit.

4. manylebau

NodweddManylyn
ModelAR3350
Cyflenwad PŵerAC110 Volts / 60 Hertz
Cyflymder Modur1680 RPM
Gallu PwysauHyd at 3300 pwys (1496 kg)
Swyddogaeth Stopio AwtomatigYes, if gate is obstructed
Swyddogaeth Cau AwtomatigOes
Diogelu gorboethiIntegredig
Capasiti Rheoli o BellSupports up to 40 remotes
UPC655222807984
ASINB07PDNMQRN

5. Gosod a Gosod

Proper installation is crucial for the safe and reliable operation of your gate opener. It is highly recommended that installation be performed by a qualified professional.

  1. Gosod yr Agorwr: Securely attach the opener to a stable concrete pad or foundation using the provided mounting plates and anchor bolts. Ensure the opener is level and correctly aligned with the gate's gear rack (sold separately).
  2. Installing Gear Rack: Attach the gear rack sections to the gate, ensuring proper meshing with the opener's drive gear. Maintain a small gap between the gear rack and the drive gear to allow for gate movement.
  3. Cysylltiadau Trydanol: Connect the opener to a dedicated 110-volt, 60 Hz power supply. All wiring must comply with local electrical codes. Refer to the wiring diagram inside the control box for specific connections.
  4. Addasiad Switsh Terfyn: Install and adjust the magnetic limit switches (magnets provided) to define the gate's fully open and fully closed positions.
  5. Cysylltiadau Ategol: Connect any optional accessories such as safety sensors, keypads, or additional remote receivers as per their respective instructions.
Mewnol view of ALEKO AR3350 gate opener with control board

Delwedd: Mewnol view of the gate opener, showing the motor and control board for wiring connections.

6. Cyfarwyddiadau Gweithredu

The ALEKO AR3350 gate opener can be operated using the provided remote controls or compatible wired accessories.

  • Gweithrediad rheoli o bell: Press the designated button on the remote control to open or close the gate. A single press will initiate movement. Pressing again during movement will stop the gate.
  • Automatic Close Function: The opener can be configured to automatically close the gate after a set delay. Refer to the control board settings for adjustment.
  • Rhyddhau â llaw: In case of power failure or malfunction, insert the manual release key into the lock cylinder and turn it to disengage the motor, allowing the gate to be moved by hand.

7. cynnal

Mae cynnal a chadw rheolaidd yn sicrhau hirhoedledd a gweithrediad diogel eich agorwr giât.

  • Yn fisol: Inspect the gate for smooth movement, ensuring no obstructions or excessive friction. Check the gear rack for wear and proper engagement.
  • Chwarterol: Lubricate moving parts as recommended by the manufacturer. Check all electrical connections for tightness and signs of corrosion.
  • Yn flynyddol: Have a qualified technician inspect the entire system, including safety features, motor, and control board.

8. Datrys Problemau

Cyfeiriwch at yr adran hon am broblemau cyffredin a'u datrysiadau posibl.

ProblemAchos PosiblAteb
Nid yw'r giât yn symud.No power; remote battery dead; manual release engaged.Check power supply; replace remote battery; disengage manual release.
Mae'r giât yn stopio'n annisgwyl.Obstruction detected; limit switch issue; motor overheat.Remove obstruction; check limit switch alignment; allow motor to cool.
Rheoli o bell ddim yn gweithio.Battery dead; remote not programmed; interference.Replace battery; reprogram remote; check for signal interference.

Os bydd problemau'n parhau, cysylltwch â'r tîm cymorth cwsmeriaid.

9. Gwarant a Chefnogaeth

The ALEKO AR3350 Gear Driven Sliding Gate Opener comes with a Gwarant 1 Flynedd o ddyddiad y pryniant, gan gwmpasu diffygion gweithgynhyrchu. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.

1 Year Warranty badge

Image: A badge indicating a 1-year warranty.

For technical assistance, parts, or warranty inquiries, please contact ALEKO customer support through their official websafle neu'r wybodaeth gyswllt a ddarparwyd gyda dogfennaeth eich cynnyrch.

© 2023 ALEKO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.