Schellenberg 70988 Basic Window Mosquito Screen 120 x 140 cm Instruction Manual

Rhagymadrodd

This manual provides detailed instructions for the assembly, installation, and maintenance of your Schellenberg Basic Window Mosquito Screen, model 70988. This kit is designed to protect your home from insects while allowing fresh air circulation. It features a high-quality fiberglass fabric and a robust aluminum frame, suitable for various window types, including those with roller shutters.

Cyfarwyddiadau Diogelwch

• Always read and understand all instructions before beginning assembly or installation.
• Use appropriate safety gear, such as gloves, when handling tools and materials.
• Keep small components out of reach of children to prevent choking hazards.
• Sicrhewch fod yr ardal waith yn lân ac wedi'i goleuo'n dda.
• Peidiwch ag addasu'r cynnyrch mewn unrhyw ffordd nad yw wedi'i disgrifio yn y llawlyfr hwn.

Cynnwys Pecyn

Please verify that all components listed below are present in your package:

• 4 x Aluminum profiles for the clamping ffrâm
• 1 x Fiberglass mosquito net fabric
• 4 x Corner connectors
• 4 x Corner connection caps
• 4 x Stainless steel suspension springs
• 2 x Piping handles
• 4 x Piping beads
• 1 x Brush seal
• 1 x cyfarwyddiadau Cynulliad

Gosod a Chynulliad

Follow these steps to assemble and install your window mosquito screen:

1. Prepare the Profiles: Connect the aluminum profiles using the corner connectors to form the frame. Ensure they are securely fitted.
2. Install the Mesh: Lay the fiberglass mosquito net fabric over the assembled frame. Using the piping beads and a suitable tool (not included, typically a spline roller), press the fabric into the groove of the aluminum profiles. Trim any excess fabric.
3. Attach Handles and Springs: Secure the two piping handles to the frame. Insert the stainless steel suspension springs into the designated slots on the frame.
4. Apply Brush Seal: Integrate the brush seal into the frame. This seal helps to close any gaps between the mosquito screen and your window frame, providing enhanced protection against insects.
5. Installation on Window: The assembled mosquito screen is designed to be hung onto the window frame using the integrated suspension springs. No drilling into your window frame is required. The slim profile (9 mm total installation depth) allows for installation even behind existing roller shutters.

Cyfarwyddiadau Gweithredu

Once installed, the mosquito screen provides continuous insect protection. To open or close your window, simply unhook the screen from the window frame using the handles and set it aside. Re-attach it when the window is in the desired position. For seasonal use, the screen can be easily removed and stored.

Cynnal a chadw

• Glanhau'r Rhwyll: The fiberglass mesh can be cleaned with a soft brush or a damp cloth and mild soapy water. Rinse thoroughly with clean water and allow to air dry. Avoid harsh chemicals or abrasive cleaners.
• Glanhau'r Ffrâm: Sychwch y ffrâm alwminiwm gydag hysbysebamp brethyn.
• Storio: For prolonged periods of non-use (e.g., winter), remove the screen from the window and store it in a dry, protected area to extend its lifespan.

Datrys problemau

Manylebau

Gwarant a Chefnogaeth

For warranty information, product support, or to inquire about replacement parts, please refer to the official Schellenberg websafle neu cysylltwch â'u gwasanaeth cwsmeriaid yn uniongyrchol. Cadwch eich prawf prynu ar gyfer unrhyw hawliadau gwarant.

Gwybodaeth Gyswllt:

• Gwneuthurwr: Schellenberg
• Websafle: www.schellenberg.de (Please check for local country-specific websafleoedd)