STANLEY SS4LS Lithium Ion Power Station Jump Starter and Portable Power Bank User Manual

Cynnyrch Drosview

The STANLEY SS4LS 600 peak battery amps portable jump starter and power pack is designed to provide reliable starting power for vehicles and portable charging for electronic devices. This ultra-compact device delivers 600 peak battery amps, capable of jump-starting most vehicles, including V6 powered cars and trucks, without the need for another vehicle. It features a built-in dual USB port for charging phones and other electronic devices, a bright LED light for illumination in dark conditions, and a reverse polarity alarm for safe operation. The unit is designed for portability and convenience, making it an essential tool for roadside emergencies or on-the-go power needs.

Ffigur 1: Blaen view of the STANLEY SS4LS Power Station, showcasing ei ddyluniad cryno a'i sgrin arddangos.

Beth Sydd yn y Bocs

• STANLEY SS4LS Lithium Ion Power Station
• Heavy-duty Smart Cables with Battery Clamps
• AC Adapter for recharging
• DC Adapter for recharging
• Llawlyfr Defnyddiwr (y ddogfen hon)

Figure 2: Included AC and DC adapters for charging the power station.

Figure 3: Heavy-duty battery clamps for secure connection during jump starting.

Gosod a Chodi Tâl

Tâl Cychwynnol

Before first use, fully charge the STANLEY SS4LS unit. A full charge can take approximately 5 hours. The unit holds 90% of its charge for over a year, but regular charging is recommended to maintain optimal battery health.

1. Connect the AC adapter to the charging port on the unit.
2. Plug the AC adapter into a standard wall outlet (120V AC).
3. The display will indicate charging status. Charge until the battery indicator shows full.
4. Alternatively, use the DC adapter to charge the unit from a vehicle's 12V DC accessory outlet.

Ffigur 4: Ochr view of the power station, highlighting the charging and USB ports.

Cyfarwyddiadau Gweithredu

Neidio Cychwyn Cerbyd

The SS4LS can jump start most vehicles, including V6 powered cars and trucks, with its 600 peak battery amps.

1. Ensure the vehicle's ignition is off and all accessories are unplugged.
2. Cysylltwch y cl coch (positif, +)amp i derfynell bositif batri'r cerbyd.
3. Cysylltwch y cl du (negatif, -)amp to a non-moving metal part of the vehicle's chassis, away from the battery and fuel lines. Peidiwch â chysylltu'r cl duamp directly to the negative battery terminal.
4. Turn on the switch on the STANLEY SS4LS unit.
5. If an improper connection is detected, the reverse polarity alarm will sound. Correct the connection before proceeding.
6. Start your vehicle. Once the vehicle starts, immediately disconnect the black clamp, then the red clamp.
7. Turn off the STANLEY SS4LS unit.

Figure 5: The STANLEY SS4LS connected to a vehicle battery for jump starting.

Defnyddio fel Banc Pŵer Cludadwy

The unit features dual 3.1A USB ports to charge your electronic devices.

1. Connect your USB charging cable to one of the USB ports on the STANLEY SS4LS.
2. Connect the other end of the cable to your electronic device (e.g., smartphone, tablet).
3. The unit will begin charging your device. The 8000 mAh capacity allows for multiple device recharges.

Figure 6: The power station actively charging a tablet and a smartphone via its USB ports.

Defnyddio'r Golau LED

A bright LED light is integrated into the unit to assist in dark environments.

• Locate the power button for the LED light on the unit.
• Press the button once to turn the light on.
• Pwyswch eto i ddiffodd y golau.

Ffigur 7: Uchaf view of the power station showing the bright LED light.

Cynnal a chadw

Ad-dalu'r Uned

To ensure the longevity and readiness of your STANLEY SS4LS, it is important to recharge it regularly, especially after each use or every 3-6 months if stored. The unit can hold 90% of its charge for over a year, but periodic recharging is crucial for battery health.

• Always recharge the unit fully after each jump start or significant power bank usage.
• For long-term storage, recharge the unit every 3-6 months to maintain battery capacity.
• Use only the provided AC or DC adapters for recharging.

Storio

Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the unit is fully charged before storing for extended periods.

Glanhau

Sychwch yr uned gyda meddal, champ cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are free of dust and debris.

Datrys problemau

Manylebau

Figure 8: Visual representation of the power station's dimensions and weight.

Gwarant a Chefnogaeth

Gwybodaeth Gwarant

The STANLEY SS4LS Lithium Ion Power Station Jump Starter comes with a Gwarant Gwneuthurwr Cyfyngedig 1 FlwyddynCadwch eich prawf prynu ar gyfer hawliadau gwarant.

Adnoddau Ychwanegol

For further assistance or detailed information, you may refer to the official user guides:

• Llawlyfr Defnyddiwr (PDF)
• Canllaw Defnyddiwr (PDF)

For customer support, please visit the official STANLEY websafle neu cysylltwch â'u hadran gwasanaethau cwsmeriaid.

Gwybodaeth Ddiogelwch Bwysig

WARNING - Cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Darllenwch a deallwch yr holl rybuddion a chyfarwyddiadau diogelwch bob amser cyn defnyddio'r cynnyrch hwn. Gall methu â dilyn y rhybuddion a'r cyfarwyddiadau arwain at sioc drydanol, tân, a/neu anaf difrifol.