1. Rhagymadrodd
Thank you for choosing the ANSMANN Powerline 4 Smart battery charger. This intelligent charger is designed to safely and efficiently recharge your NiMH AA (Mignon HR6) and AAA (Micro HR03) rechargeable batteries. Please read this manual carefully before first use to ensure proper operation and to maximize the lifespan of your batteries and charger.
2. Gwybodaeth Diogelwch
- Use this charger only for NiMH AA and AAA rechargeable batteries. Do not attempt to charge other battery types (e.g., alkaline, lithium) as this may cause explosion, leakage, or personal injury.
- Peidiwch ag amlygu'r gwefrydd i law, lleithder, na thymheredd eithafol.
- Ensure proper polarity when inserting batteries. The charger features reverse polarity protection.
- Peidiwch â dadosod na newid y gwefrydd. Cyfeiriwch bob gwasanaeth at bersonél cymwys.
- Datgysylltwch y gwefrydd o'r soced pŵer pan nad yw'n cael ei ddefnyddio neu cyn glanhau.
- The charger incorporates an automatic shutdown (-dU) and an 8-hour safety timer to prevent overcharging.
- Cadwch allan o gyrraedd plant.
For detailed safety information, please refer to the safety document provided with your product.
3. Cynnyrch Drosview
3.1 Nodweddion Allweddol
- Intelligent charging: Automatically and individually charges 1 to 4 NiMH AA/AAA batteries.
- Automatic charge termination: Stops charging when batteries reach 100% capacity.
- Trickle charge: Maintains full charge once batteries are charged.
- Defective battery detection: Identifies and signals faulty rechargeable batteries.
- Accu Repair mode: Revives deeply discharged or 'tired' rechargeable batteries.
- Safety features: Reverse polarity protection, -dU automatic shutdown, 8-hour safety timer.
3.2 Cynnwys Pecyn
- 1x ANSMANN Powerline 4 Smart Battery Charger with integrated power supply (100-240V)
- Llawlyfr Defnyddiwr 1x
3.3 Cydran Cynnyrch
The charger features four individual charging slots for AA or AAA batteries and LED indicators above each slot to show the charging status.
4. Gosod
4.1 Cysylltu'r Gwefrydd
- Ensure the charger is clean and dry before connecting to power.
- Plug the integrated power plug of the ANSMANN Powerline 4 Smart charger directly into a standard wall power outlet (100-240V AC).
4.2 Mewnosod Batris
- Open the battery compartment if applicable, or simply slide batteries into the slots.
- Insert 1 to 4 NiMH AA (Mignon HR6) or AAA (Micro HR03) rechargeable batteries into the charging slots.
- Ensure correct polarity (+ and -) by matching the battery terminals with the markings on the charger slots. The charger has reverse polarity protection.
5. Cyfarwyddiadau Gweithredu
5.1 Proses Codi Tâl
Once batteries are correctly inserted and the charger is plugged in, the charging process begins automatically for each individual battery. The LED indicator above each slot will show the charging status:
- Fflachio Gwyrdd: Pre-charge mode (initial phase of charging).
- Coch: Fast charge mode (main charging phase).
- Gwyrdd: Ready / Trickle charge mode (battery is fully charged and maintained).
- Fflachio coch: Defective battery detected.
The charging time for a 1000 mAh battery is approximately 2 hours and 30 minutes. For a 2500 mAh battery, it is approximately 6 hours.
5.2 Accu Repair Mode
The Powerline 4 Smart features an 'Accu Repair' function. This mode attempts to reactivate deeply discharged or 'tired' NiMH batteries, potentially extending their usable life. This process is automatic and integrated into the charging cycle.
5.3 Defective Battery Detection
The charger automatically detects defective batteries. If a faulty battery is inserted, the corresponding LED indicator will flash red, and the charging process for that specific slot will not proceed. Remove and dispose of defective batteries according to local regulations.
6. cynnal
6.1 Glanhau
- Datgysylltwch y gwefrydd o'r soced pŵer bob amser cyn glanhau.
- Use a dry, soft cloth to wipe the exterior of the charger.
- Peidiwch â defnyddio glanhawyr hylifol, toddyddion na deunyddiau sgraffiniol.
- Ensure no dust or debris accumulates in the charging slots.
6.2 Storio
- Storiwch y charger mewn lle oer, sych i ffwrdd o olau haul uniongyrchol a thymheredd eithafol.
- When not in use for extended periods, unplug the charger.
7. Datrys Problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Charger not starting / No LED activity | No power supply; Charger not properly plugged in. | Check power outlet; Ensure charger is securely plugged in. |
| LED yn fflachio coch | Defective battery detected. | Remove the battery. If it continues to flash red with other batteries, the charger may be faulty. |
| Batri ddim yn gwefru'n llawn | Battery is old or damaged; Incorrect battery type. | Try the 'Accu Repair' function (automatic). Replace old batteries. Ensure only NiMH AA/AAA batteries are used. |
| Mae'r gwefrydd yn teimlo'n gynnes yn ystod y llawdriniaeth | Normal during charging. | This is normal. If it becomes excessively hot or emits smoke/odor, unplug immediately and contact support. |
8. manylebau
| Nodwedd | Manyleb |
|---|---|
| Brand | Ansmann |
| Rhif Model | 1001-0049 |
| Mathau Batri Cydnaws | NiMH AA/Mignon/HR6 and AAA/Micro/HR03 |
| Nifer y Slotiau Gwefru | 4 |
| Mewnbwn Voltage | 100-240 Folt (AC) |
| Allbwn Voltage | 5 folt (DC) |
| Dwysedd Presennol | 500 mA |
| Typical Charging Time (1000 mAh) | 2.5 awr |
| Product Dimensions (P x L x H) | 67P x 12l x 77H millimeters (Note: The provided dimensions 67P x 12l x 77H mm seem inconsistent with the image 119mm H x 67mm W x 36mm D. Using image dimensions for clarity.) |
| Dimensiynau'r Cynnyrch (Uchder x Lled x Dyfnder) | 119 mm x 67 mm x 36 mm |
| Lliw | Du |
| Safonau Diogelwch | TÜV ardystiedig |
| Gwlad Tarddiad | Tsieina |
9. Gwarant a Chefnogaeth
9.1 Gwybodaeth Gwarant
The ANSMANN Powerline 4 Smart charger comes with a 3-year warranty. Please retain your proof of purchase for warranty claims. Spare parts availability in the EU is also 3 years.
9.2 Cefnogaeth i Gwsmeriaid
For any questions, technical assistance, or warranty claims, please contact ANSMANN customer support through their official website or the retailer where you purchased the product. Do not attempt to repair the device yourself.