Elementi Manhattan Outdoor Gas Firepit Table (Model OFG103-NG) Instruction Manual

1. Rhagymadrodd

Thank you for choosing the Elementi Manhattan Outdoor Gas Firepit Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new natural gas fire pit. Please read all instructions carefully before use and retain this manual for future reference.

This fire pit is designed for outdoor use only and operates on natural gas. It features a durable concrete construction and an electronic ignition system for ease of use.

Image 1.1: The Elementi Manhattan Outdoor Gas Firepit Table in an outdoor setting.

2. Gwybodaeth Bwysig am Ddiogelwch

RHYBUDD: For your safety, read and understand all instructions before assembling or operating this appliance. Failure to follow these instructions could result in fire, explosion, serious injury, or death.

• This appliance is for outdoor use only. Do not use in an enclosed area.
• Peidiwch â storio na defnyddio gasoline nac anweddau a hylifau fflamadwy eraill yng nghyffiniau'r offer hwn neu unrhyw declyn arall.
• Rhaid i osodwr cymwys, asiantaeth gwasanaeth, neu gyflenwr nwy gyflawni'r gosodiad a'r gwasanaeth.
• Maintain minimum clearances: 36 inches (91 cm) from sides and rear to combustible materials.
• Cadwch blant ac anifeiliaid anwes i ffwrdd o'r pwll tân.
• Never leave the fire pit unattended when in use.
• Ensure the fire pit is placed on a hard, level, non-combustible surface.
• Peidiwch â defnyddio'r teclyn hwn ar gyfer coginio.
• Always turn off the gas supply when the fire pit is not in use.
• Inspect the gas hose before each use. If there is evidence of excessive abrasion or wear, or if the hose is cut, it must be replaced prior to the appliance being put into operation.

Image 2.1: Ensure proper clearance around the fire pit during operation.

3. Cynnwys Pecyn

Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, do not attempt to assemble the product. Contact customer service for assistance.

• Fire Pit Table (Concrete body)
• Stainless Steel Burner Assembly
• Lava Rock (approx. 13 lbs / 6 kg)
• Gorchudd Amddiffynnol
• Natural Gas Hose with Quick Connect Fitting
• Ignition System (pre-installed)
• Llawlyfr Cyfarwyddiadau

Image 3.1: Typical package contents including the fire pit, lava rock, and protective cover.

4. Cyfarwyddiadau Gosod

4.1 Dewis a Pharatoi Safle

• Choose a firm, level, non-combustible surface for the fire pit.
• Ensure adequate clearance from combustible materials (walls, fences, overhangs, trees). Refer to safety information for minimum distances.
• The fire pit is heavy (142 lbs). Two people are recommended for safe placement.

4.2 Gas Connection (Natural Gas)

This fire pit is designed for natural gas. Connection must be performed by a qualified professional.

1. Ensure the main natural gas supply valve is OFF.
2. Connect the provided natural gas hose with the quick connect fitting to your existing natural gas supply line. Ensure all connections are tight and secure.
3. Perform a leak test on all connections using a soapy water solution. Bubbles indicate a leak. If a leak is detected, turn off the gas supply, tighten connections, and re-test. Do not operate the fire pit if a leak persists.

Note: The gas connection point is typically located on the side of the fire pit. Plan your patio layout to accommodate the gas line discreetly.

4.3 Lava Rock Placement

1. Carefully unpack the lava rocks.
2. Distribute the lava rocks evenly over the burner pan. Do not cover the igniter electrode or the burner ports. Ensure the igniter is visible and clear of debris.
3. Do not overfill the burner pan with lava rocks.

Image 4.1: Lava rocks distributed around the burner.

5. Cyfarwyddiadau Gweithredu

5.1 Gwiriad Cyn Gweithredu

• Ensure the area around the fire pit is clear of combustible materials.
• Verify all gas connections are secure and there are no leaks.
• Confirm the igniter electrode is clear of lava rocks.

5.2 Gweithdrefn Tanio

1. Open the main natural gas supply valve.
2. Locate the control knob on the side of the fire pit.
3. Push and turn the control knob counter-clockwise to the "LOW" position.
4. Immediately press and hold the igniter button. You should hear a clicking sound and see a spark at the igniter electrode.
5. Once the burner ignites, continue to hold the control knob in for 10-15 seconds to allow the thermocouple to heat up.
6. Release the control knob. If the flame extinguishes, repeat steps 3-5.
7. Adjust the flame height by turning the control knob between "LOW" and "HIGH".

If the burner does not ignite after several attempts, refer to the Troubleshooting section.

5.3 Shut-Down Procedure

1. Turn the control knob clockwise to the "OFF" position.
2. Close the main natural gas supply valve.
3. Allow the fire pit to cool completely before covering or moving.

6. cynnal

6.1 Cleaning the Fire Pit

• Gwnewch yn siŵr bod y pwll tân wedi oeri'n llwyr cyn ei lanhau.
• Wipe concrete surfaces with a soft, damp cloth. For stubborn stains, use a mild soap solution. Avoid abrasive cleaners or harsh chemicals.
• Clean the burner and lava rocks periodically to remove debris.

Image 6.1: The concrete finish requires gentle cleaning.

6.2 Gorchudd Amddiffynnol

A protective cover is included to shield the fire pit from weather elements when not in use. Ensure the fire pit is completely cool and dry before applying the cover. Regular use of the cover will help prolong the life and appearance of your fire pit.

Image 6.2: Always use the provided protective cover when the fire pit is not in use.

6.3 Gaeafu

During prolonged periods of non-use or freezing temperatures, disconnect the gas supply and store the fire pit in a dry, protected area. If storing outdoors, ensure it is thoroughly covered and protected from moisture.

7. Datrys Problemau

8. manylebau

Image 8.1: Dimensional drawing of the fire pit.

9. Gwarant a Chymorth i Gwsmeriaid

For warranty information, please refer to the warranty card included with your product or visit the official Elementi websafle. Cadwch eich prawf prynu ar gyfer unrhyw hawliadau gwarant.

If you have any questions, require technical assistance, or need to order replacement parts, please contact Elementi customer support. Contact details can typically be found on the manufacturer's websafle neu ar becynnu'r cynnyrch.

Note: Always provide your product model number (OFG103-NG) and purchase date when contacting support.