1. Cynnyrch Drosview
The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.
Nodweddion Allweddol:
- Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
- Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
- Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
- Cynhwysedd Torri: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
- Gwarchodwr Diogelwch: A protective guard for the cutting disc ensures user safety from chips and dust.
2. Cyfarwyddiadau Diogelwch
Darllenwch a deallwch bob amser yr holl rybuddion diogelwch, cyfarwyddiadau, darluniau a manylebau a ddarperir gyda'r offeryn pŵer hwn. Gall methu â dilyn yr holl gyfarwyddiadau a restrir isod arwain at sioc drydanol, tân a/neu anaf difrifol.
Rhybuddion Diogelwch Cyffredinol:
- Gwisgwch offer amddiffynnol personol (PPE) priodol gan gynnwys sbectol ddiogelwch, amddiffyniad clyw a menig.
- Gwnewch yn siŵr bod yr ardal waith yn lân, wedi'i goleuo'n dda, ac yn rhydd o rwystrau.
- Cadwch blant a gwylwyr draw wrth weithredu'r teclyn.
- Never operate the tool if the power cord or plug is damaged.
- Always disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
- Defnyddiwch y llafn cywir ar gyfer y deunydd sy'n cael ei dorri.
- Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.
3. Cydrannau Drosview
Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:
- Cutting Table (Stainless Steel)
- Diamond Cutting Disc (180 mm diameter)
- Uned Moduron
- Cronfa Ddŵr
- Cutting Guide with Scale
- Angle Stop (-45° to +45°)
- Gwarchodlu Blade
- Switsh ymlaen/i ffwrdd
- Cario Handle
Ffigur 1: Drosoddview of the Einhell TC-TC 800 Tile Cutter with its main parts.
4. Gosod
Before operating the tile cutter, ensure proper setup for safety and optimal performance.
4.1 Dadbacio ac Archwilio
- Tynnwch yr holl gydrannau o'r pecyn yn ofalus.
- Inspect the tool for any signs of damage during transit. Do not operate if damaged.
- Gwnewch yn siŵr bod yr holl gydrannau a restrir yn bresennol.
4.2 Llenwi'r Gronfa Ddŵr
The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.
- Locate the water reservoir beneath the cutting table.
- Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
- Regularly check the water level during operation and refill as needed.
Figure 2: Filling the water reservoir for wet cutting.
4.3 Adjusting the Cutting Guide and Angle Stop
For accurate cuts, adjust the cutting guide and angle stop as required.
- The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
- For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.
Figure 3: Adjustable angle stop for miter cuts.
5. Cyfarwyddiadau Gweithredu
Follow these steps for safe and effective tile cutting.
5.1 Pweru Ymlaen/Diffodd
- Connect the tile cutter to a suitable power outlet (240 Volts).
- To turn on, press the green 'ON' button.
- To turn off, press the red 'OFF' button.
Figure 4: Power switch for turning the machine on and off.
5.2 Gwneud Toriad
- Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
- Ensure the water pump is active and water is flowing to the blade.
- Turn on the tile cutter.
- Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
- Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.
Figure 5: Demonstrating a tile being cut with the machine.
5.3 Fideo Cynnyrch Swyddogol: Sut i'w Ddefnyddio
Video 1: This video demonstrates the basic operation and usage of a tile cutter, including setup and cutting techniques.
6. cynnal
Regular maintenance ensures the longevity and performance of your tile cutter.
6.1 Cleaning the Water Reservoir
After each use, clean the water reservoir to prevent buildup of tile dust and debris.
- Datgysylltwch y cyflenwad pŵer.
- Remove the cutting table or access panel to reach the reservoir.
- Empty the dirty water and thoroughly clean the reservoir with fresh water.
- Ail-ymunwch â'r cydrannau.
6.2 Amnewid Llafn
Replace the diamond cutting disc when it becomes dull or damaged.
- Gwnewch yn siŵr bod yr offeryn wedi'i ddatgysylltu.
- Use the provided tool to loosen the blade retaining nut.
- Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
- Tighten the retaining nut securely.
7. Datrys Problemau
This section addresses common issues you might encounter with your tile cutter.
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Poor cut quality (chipping, uneven edges) | Dull or incorrect blade; insufficient water cooling; pushing too fast. | Replace blade with a suitable diamond disc; ensure water reservoir is full and pump is working; reduce feeding speed. |
| Water overflow from table | Water channels blocked; reservoir too full; uneven surface. | Clean water channels; do not overfill reservoir; ensure the machine is on a level surface. |
| Nid yw'r peiriant yn cychwyn | No power supply; faulty switch; motor issue. | Check power connection and circuit breaker; test the power outlet; contact customer support if switch or motor is faulty. |
| Rusted screws/components | Lack of proper drying/maintenance after wet use. | Regularly clean and dry all metal components after use. Apply a rust preventative lubricant (e.g., WD-40) to screws and moving parts. |
8. manylebau
| Nodwedd | Manylyn |
|---|---|
| Brand | Einhell |
| Rhif Model | 4301185 |
| Grym | 800 Wat |
| Cyftage | 240 folt |
| Cyflymder | 2950 RPM |
| Diamond Cutting Disc Diameter | 180 mm |
| Max. Cutting Height (90°) | 34 mm |
| Max. Cutting Height (45°) | 14 mm |
| Angle of Cut | 45 Gradd |
| Table Dimensions (L x W) | 39.6 cm x 38.5 cm |
| Dimensiynau Cynnyrch (L x W x H) | 39.6l. x 38.5an. x 25.5al. centimeters |
| Pwysau Cynnyrch | 9.1 Cilogram |
| Ffynhonnell Pwer | Trydan gyda llinyn |
| Nodweddion Arbennig | Adjustable angle stop, parallel stop with scale |
9. Gwarant a Chefnogaeth
9.1 Gwybodaeth Gwarant
This Einhell product comes with a Gwarant cyfyngedig 2 mlyneddCadwch eich prawf prynu ar gyfer unrhyw hawliadau gwarant.
9.2 Cefnogaeth i Gwsmeriaid
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webgwefan neu becynnu eich cynnyrch i gael y wybodaeth gyswllt ddiweddaraf.