Atlantic Spring Arm TV Mount User Manual

Cyfarwyddiadau Diogelwch Pwysig

Please read this manual thoroughly before installation and use. Improper installation or use may cause serious injury or damage. Keep this manual for future reference.

• Gwnewch yn siŵr y gall yr arwyneb mowntio gynnal pwysau cyfun y mowntiad a'r teledu yn ddiogel.
• Peidiwch â bod yn fwy na'r capasiti pwysau uchaf o 66 pwys (30 kg).
• Mae'r mowntiad hwn wedi'i gynllunio ar gyfer setiau teledu rhwng 23 a 65 modfedd.
• Always use appropriate safety equipment during installation.
• Do not over-tighten screws, as this may cause damage.
• Cadwch rannau bach i ffwrdd oddi wrth blant.
• Os oes gennych unrhyw amheuon ynghylch y gosodiad, ymgynghorwch ag arbenigwr cymwys.

Cynnyrch Drosview

The Atlantic Spring Arm TV Mount provides a full-motion solution for mounting your television, allowing for effortless adjustment in multiple directions. Its robust design ensures your TV is held securely while offering optimal viewing onglau.

Manylebau Technegol

Canllaw Gosod

Follow these steps carefully to ensure proper and secure installation of your TV mount. Professional installation is recommended for optimal safety and performance.

Cam 1: Paratoi Wal

Locate a suitable wall stud for mounting. Use a stud finder to ensure the stud is solid and can support the weight. Mark the drilling locations accurately.

Step 2: Attaching Wall Plate

Drill pilot holes at the marked locations. Secure the wall plate of the mount to the wall using the provided lag bolts. Ensure it is level and tightly fastened.

Step 3: Attaching VESA Plate to TV

Attach the VESA mounting plate to the back of your TV using the appropriate screws. Ensure the screws are compatible with your TV's VESA pattern and are securely tightened.

Step 4: Mounting TV to Arm

Carefully lift the TV with the attached VESA plate and hook it onto the mount's arm. Secure the TV to the arm using the locking mechanisms or screws as per the detailed instructions in the full PDF manual.

Cam 5: Rheoli Ceblau

Utilize the integrated cable management system to route and conceal your TV cables. This helps maintain a clean and organized appearance.

Gweithredu Eich Mowntiad Teledu

The Atlantic Spring Arm TV Mount offers versatile positioning for optimal viewing. Once installed, you can easily adjust your TV's position.

• Estyniad/Tynnu'n Ôl: Gently pull or push the TV to extend or retract the arm from the wall.



• troi: Rotate the TV horizontally to achieve a 360-degree swivel for viewing from different angles in the room.



• Tilt: Adjust the vertical angle of the TV to reduce glare or optimize viewing uchder.

Cynnal a chadw

To ensure the longevity and smooth operation of your Atlantic Spring Arm TV Mount, perform the following maintenance:

• Glanhau: Wipe the mount with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp lliain a glanedydd ysgafn, yna sychwch yn drylwyr. Osgowch lanhawyr sgraffiniol.
• Gwiriadau Cyfnodol: Gwiriwch yr holl sgriwiau a bolltau o bryd i'w gilydd i sicrhau eu bod yn dal yn dynn. Ail-dynhau os oes angen.
• Iro: The spring arm mechanism is designed for maintenance-free operation. Do not attempt to lubricate internal components.

Datrys problemau

If you encounter issues with your TV mount, refer to the common problems and solutions below. For detailed visual guidance on balance adjustment, please watch the official video provided.

Arm Balance Adjustment

The spring arm tension needs to be adjusted to match the weight of your TV for effortless movement. This adjustment is crucial for the mount to hold its position correctly.

• Problem: TV remains in an UP position (TV is too light for current arm settings).
  Ateb: Push the TV down to a lower position. Locate the balance adjustment screw (often near a yellow dot/sticker on the arm). Use the hex key to turn the screw CLOCKWISE. Test the arm balance after each turn until the TV holds its position easily.
• Problem: TV droops DOWN after attaching (TV is too heavy for current arm settings).
  Ateb: You will likely need an extra set of hands for this. Gently lift the TV to an elevated position. Use the hex key to turn the balance adjustment screw GWRTH-GLOCKWISE. Test the arm balance after each turn until the TV holds its position easily.

For a visual demonstration of the balance adjustment process, please refer to the official video below:

Gwarant a Chymorth i Gwsmeriaid

Atlantic products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship. For specific warranty details, please refer to the full user manual PDF available for download.

For further assistance, technical support, or warranty claims, please visit the official Atlantic website or contact their customer service department. You can also refer to the comprehensive User Manual (PDF) for more detailed information:

Lawrlwythwch y Llawlyfr Defnyddiwr Llawn (PDF)