Cynnyrch Drosview
The Rybozen BH061 Wireless TV Headphones system provides a high-fidelity audio experience for watching TV, playing games, or using a computer without disturbing others. Featuring 2.4GHz digital RF technology, it offers an extended wireless range and multiple audio input options.
Cynnwys Pecyn
Wrth ddadbocsio, gwnewch yn siŵr bod yr holl eitemau yn bresennol:
- Rybozen Wireless Headphones
- 2.4G Digital RF Transmitter (Charging Dock)
- Cebl Optegol
- RCA Cable
- Cebl AUX 3.5mm
- Addasydd Pwer AC
- Llawlyfr Defnyddiwr
Image: Rybozen BH061 Wireless TV Headphones, transmitter, various cables, and user manual.
Canllaw Gosod
1. Codi Tâl y Clustffonau
Before initial use, fully charge the headphones for approximately 6 hours. The transmitter also serves as the charging dock.
- Connect the AC power adapter to the transmitter's DC 5V power input and plug it into a power outlet.
- Slide the power switch on the transmitter to the 'ON' position. The 'POWER' LED will illuminate.
- Sicrhewch fod y clustffonau wedi'u pweru i ffwrdd.
- Place the headphones onto the transmitter dock, aligning the charging contacts. The operating indication LED on the transmitter will flash RED once per 0.5 second while charging.
- The operating indication LED will turn OFF when the headphones are fully charged. If headphones are not properly placed, the LED will not light up.
2. Cysylltu'r Trosglwyddydd â'ch Teledu
The transmitter supports Optical, AUX (3.5mm), and RCA audio inputs. Choose the appropriate connection method for your TV.
Option 1: TV with Optical Audio Output (Recommended for best quality)
- Connect one end of the Optical cable to the 'OPTICAL OUTPUT' port on your TV.
- Connect the other end of the Optical cable to the 'OPTICAL' input on the transmitter.
- Slide the audio source switch on the transmitter to 'OPTICAL'.
- Access your TV's audio settings. Navigate to 'Sound' or 'Audio Output'.
- Set the TV's audio output format to 'PCM' or ensure 'Dolby/DTS' is off. The menu options may vary depending on your TV brand and model.
Option 2: TV with AUX/3.5mm Audio Output
- Connect one end of the 3.5mm AUX cable to the headphone jack (3.5mm audio output) on your TV.
- Connect the other end of the 3.5mm AUX cable to the 'AUDIO-IN' port on the transmitter.
- Slide the audio source switch on the transmitter to 'AUDIO-IN'.
- Access your TV's audio settings. Navigate to 'Sound' or 'Audio Output'.
- Set the TV's speaker option to 'Headset' or 'External Speaker'. The menu options may vary depending on your TV brand and model.
Option 3: TV with RCA Audio Output
- Connect the RCA cable (red and white plugs) to the 'AUDIO OUT' ports (red for right, white for left) on your TV. Ensure you use ports labeled "AUDIO OUT"; other red/white ports like "COMPONENT IN" are incorrect.
- Connect the other end of the RCA cable (3.5mm jack) to the 'AUDIO-IN' port on the transmitter.
- Slide the audio source switch on the transmitter to 'AUDIO-IN'.
- Access your TV's audio settings. Navigate to 'Sound' or 'Audio Output'.
- Set the TV's speaker option to 'Headset' or 'External Speaker'. The menu options may vary depending on your TV brand and model.
Image: Transmitter with clearly labeled audio input ports (RCA/3.5mm, Optical) and power input.
Video: Detailed setup guide for Rybozen BH061 Wireless TV Headphones.
Cyfarwyddiadau Gweithredu
1. Powering On/Off and Pairing
- Press the power button on the right earcup of the wireless headphones to turn them on. The signal indication LED will flash RED.
- The headphones will automatically pair with the transmitter. Once paired, the headphone's signal indication LED will turn RED.
- To turn off, press and hold the power button until the LED turns off.
2. Adjusting Volume and Sound Effects
Image: Headphone controls for volume, scan, and power.
- Rheoli cyfaint: Use the 'VOL+' and 'VOL-' buttons on the left earcup to adjust the music volume.
- Sound Effects (EQ): The default sound effect is 'Original Sound'. Press the 'SCAN' button on the left earcup to cycle through sound effects:
- First press: 3D Surround Sound (signal indication LED turns GREEN).
- Second press: Bass Sound Effect (signal indication LED turns ORANGE).
- Third press: Original Sound (signal indication LED turns RED).
3. Automatic Power Off
If there is no audio output from the TV or other source for 10 minutes, the headphones will automatically power off to conserve battery.
Cynnal a chadw
1. Glanhau
- Sychwch y clustffonau a'r trosglwyddydd gyda lliain meddal, sych.
- Peidiwch â defnyddio glanhawyr sgraffiniol, toddyddion na chemegau cryf.
2. Storio
- Store the headphones on the charging dock when not in use to keep them charged and ready.
- Ceisiwch osgoi storio mewn tymheredd eithafol neu leithder uchel.
3. Gofal Batri
- I gael bywyd batri gorau posibl, osgoi draenio'r batri'n llwyr yn aml.
- Gwefrwch y clustffonau'n rheolaidd, hyd yn oed os na chânt eu defnyddio am gyfnodau hir.
Datrys problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Dim sain o glustffonau | 1. Transmitter not powered on. 2. Headphones not powered on. 3. Incorrect audio cable connection. 4. Incorrect TV audio output settings. 5. Headphones not paired. | 1. Ensure transmitter power switch is ON. 2. Turn on headphones. 3. Verify audio cable is securely connected to the correct 'AUDIO OUT' port on TV and 'AUDIO-IN' or 'OPTICAL' on transmitter. 4. Adjust TV audio settings (PCM, Headset/External Speaker). 5. Place headphones on the dock to re-pair. |
| Ansawdd sain gwael/statig | 1. Allan o'r ystod. 2. Interference from other 2.4GHz devices. 3. Low headphone battery. | 1. Move closer to the transmitter. 2. Move other 2.4GHz devices away from the transmitter/headphones. 3. Recharge headphones. |
| Nid yw clustffonau'n gwefru | 1. Transmitter not powered. 2. Headphones not correctly placed on dock. 3. Charging contacts dirty. | 1. Ensure transmitter is plugged in and powered on. 2. Re-position headphones on the dock to ensure proper contact. 3. Clean charging contacts on both headphones and dock with a dry cloth. |
| Headphones turn off automatically | No audio signal for 10 minutes. | This is a power-saving feature. Ensure your audio source is active. |
Manylebau
| Nodwedd | Manylyn |
|---|---|
| Rhif Model | BH061 |
| Technoleg Cysylltedd | Wireless (2.4GHz RF) |
| Di-wifr Range | Hyd at 160 troedfedd / 50 metr |
| Math Gyrrwr Sain | Gyrrwr Dynamig |
| Siâp clustffon | Gor-glust |
| Rhyngwyneb Dyfais Mewnbwn | Optical, 3.5mm, RCA |
| Bywyd Batri | Tua 18 awr |
| Amser Codi Tâl | Tua 6 awr |
| Pwysau Eitem | 1.04 Bunt |
| Dimensiynau Cynnyrch | 4 x 3.5 x 9.6 modfedd |
| Gwneuthurwr | DIGITNOW |
Gwarant a Chefnogaeth
For warranty information and technical support, please refer to the contact details provided with your product packaging or visit the official Rybozen websafle. Cadwch eich derbynneb prynu ar gyfer hawliadau gwarant.
