Lepro Industrial LED Desk Lamp

Rhagymadrodd

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Mae hyn yn amryddawn lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

Darllenwch y llawlyfr hwn yn drylwyr cyn ei osod a'i weithredu, a'i gadw i gyfeirio ato yn y dyfodol.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Cyfarwyddiadau Diogelwch

• Read all instructions carefully before using the lamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Defnyddiwch fylbiau sylfaen E27 yn unig gyda wat uchaftage o 40W.
• Peidiwch â defnyddio'r lamp gyda llinyn pŵer neu blwg wedi'i ddifrodi.
• Bwriedir y cynnyrch hwn ar gyfer defnydd dan do yn unig. Peidiwch â'i amlygu i ddŵr na lleithder uchel.
• Cadw'r lamp i ffwrdd o ddeunyddiau fflamadwy.
• Peidiwch â cheisio dadosod neu atgyweirio'r lamp yourself. Contact qualified personnel for service.

Cynnwys Pecyn

Gwiriwch y pecyn am yr eitemau canlynol:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Llawlyfr Defnyddiwr

Note: The E27 bulb is not included and must be purchased separately.

Gosod a Gosod

Dilynwch y camau hyn i gydosod a gosod eich desgamp:

1. Atodwch y Clamp: Caewch y clamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. Cynnull yr Lamp Pennaeth: Gosodwch y lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Mewnosodwch y fraich: Rhowch y lamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Gosod y Bwlb: Sicrhau y lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp soced. Peidiwch â gor-dynhau.
5. Cysylltu â Power: Plygiwch y lamp's power cord into a suitable electrical outlet.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Delwedd: Yr lamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Cyfarwyddiadau Gweithredu

Pŵer ymlaen / i ffwrdd: Locate the rocker switch on the power cord. Press the switch to turn the lamp ymlaen neu i ffwrdd.

Addasu'r Ongl Golau: Mae'r lamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Delwedd: Yr lamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Cynnal a chadw

Glanhau: I lanhau'r lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Amnewid Bylbiau: Cyn newid y bwlb, gwnewch yn siŵr bod y lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp yn ôl i mewn.

Datrys problemau

• Lamp ddim yn troi ymlaen:
  • Gwiriwch a yw'r llinyn pŵer wedi'i blygio'n ddiogel i'r allfa.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Gwiriwch y soced pŵer trwy blygio dyfais arall i mewn.
• Mae golau yn fflachio:
  • Gwnewch yn siŵr bod y bwlb wedi'i sgriwio i mewn yn dynn.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Check for loose connections in the power cord or outlet.
• Lamp yn ansefydlog:
  • Sicrhewch y clamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • Gwiriwch fod y lamp arm is properly inserted into the clamp cyd.

Manylebau

Image: Product dimensions and key features like E27 bulb base and power cord length.

Gwarant a Chefnogaeth

Gwarant: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Cefnogaeth i Gwsmeriaid: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.