1. Rhagymadrodd
Diolch am brynuasing the Neewer TT560 Flash Speedlite Kit. This manual provides detailed instructions for the proper setup, operation, and maintenance of your flash unit and accessories. Please read this manual thoroughly before use to ensure optimal performance and longevity of your equipment.
2. Cynnwys Pecyn
The Neewer TT560 Flash Speedlite Kit includes the following items:
- (1) TT560 Flash Speedlite
- (1) Hard Diffuser
- (12) Color Filters
- (1) Wireless Remote Control
- (1) Instruction Manual (this document)
Delwedd: Drosoddview of the Neewer TT560 Flash Speedlite Kit, showing the flash unit, hard diffuser, color filters, and wireless remote control.
3. Gosod
3.1 Battery Installation (TT560 Flash)
- Locate the battery compartment on the back of the TT560 flash unit.
- Agorwch y clawr adran batri.
- Insert four (4) AA batteries (Alkaline or Ni-MH are compatible) according to the polarity indicators (+/-) inside the compartment.
- Caewch y clawr adran batri yn ddiogel.
Note: Ensure batteries are inserted correctly to prevent damage to the unit.
3.2 Battery Installation (Wireless Remote Control)
The wireless remote control is powered by a CR2025 battery. Refer to the remote's specific instructions for battery replacement if needed.
3.3 Attaching the Flash to Your Camera
- Sicrhewch fod eich camera wedi'i ddiffodd.
- Slide the hot shoe mount of the TT560 flash into your camera's hot shoe.
- Tighten the locking ring or lever on the flash unit to secure it to the camera's hot shoe.
Image: The TT560 Flash Speedlite securely mounted on a DSLR camera's hot shoe, with the wireless remote control shown nearby.
4. Cyfarwyddiadau Gweithredu
4.1 Pweru Ymlaen/Diffodd
Gwasgwch y YMLAEN / I FFWRDD button on the flash unit to turn it on or off. The indicator lights will illuminate when the unit is powered on.
4.2 Modd Flash
The TT560 Flash Speedlite supports three flash modes: M, S1, and S2.
- Modd (Llawlyfr): In this mode, you manually set the flash output level. Use the + a - buttons to adjust the power from 1/1 (full power) down to 1/128. There are 8 steps of output control.
- S1 (Slave 1) Mode: This mode is suitable for manual flash environments. The flash will fire synchronously when the main flash fires.
- S2 (Slave 2) Mode: This mode is suitable for TTL flash environments. The flash will ignore the pre-flash from the main flash and only fire in response to the second, actual flash.
Gwasgwch y MODD button to cycle through the available flash modes.
Image: Close-up of the TT560 Flash Speedlite's control panel, showing the mode selection, power adjustment buttons, and LED indicators for flash output.
4.3 Adjusting Flash Head Angle
The flash head can be rotated vertically from 0 to 90 degrees and horizontally from 0 to 270 degrees. This allows for bounce flash techniques, directing light off ceilings or walls for softer illumination.
Image: Illustration demonstrating the vertical and horizontal rotation capabilities of the TT560 Flash Speedlite head.
4.4 Using the Hard Diffuser
The included hard diffuser softens the harsh light from the flash, reducing shadows and creating a more balanced and even illumination. Simply slide the hard diffuser over the flash head until it is securely in place.
Image: The TT560 Flash Speedlite with the white hard diffuser attached to the flash head, demonstrating its use for softening light.
4.5 Defnyddio Hidlwyr Lliw
The kit includes 12 different color filters to create various lighting effects and adjust color temperature. To use a color filter, attach it to the flash head, typically using a gel holder or by securing it with a band (not included, but often used with gels).
Image: The TT560 Flash Speedlite with a yellow color filter applied to its head, alongside a spread of the 12 assorted color filters included in the kit.
4.6 Defnyddio'r Rheolydd Anghysbell Di-wifr
The wireless remote control allows you to trigger your camera's shutter remotely, preventing camera shake and ensuring sharp images. It works up to 8 meters (26 feet) away. Ensure your camera has a built-in infrared receiver for compatibility.
Note: The remote control triggers the camera's shutter, not the flash unit directly. The flash unit will fire based on its selected S1/S2 mode in conjunction with your camera's flash or another main flash.
5. cynnal
- Keep the flash unit and accessories clean and dry.
- Use a soft, dry cloth to wipe the exterior. For stubborn dirt, a slightly damp gellir defnyddio brethyn, ac yna brethyn sych.
- Peidiwch â defnyddio glanedyddion na thoddyddion cryf.
- Avoid touching the flash tube directly with bare hands, as oils can reduce its lifespan. If touched, clean with a lens cleaning cloth.
- Tynnwch y batris os na fydd yr uned yn cael ei defnyddio am gyfnod hir er mwyn atal gollyngiadau.
6. Datrys Problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Nid yw'r fflach yn tanio. | Low or dead batteries; Incorrect mode selection; Flash not securely mounted; Flash not charged. | Replace batteries; Select appropriate flash mode (M, S1, S2); Ensure flash is securely mounted and locking ring is tightened; Wait for the ready indicator light to illuminate. |
| Wireless remote control not working. | Dead CR2025 battery; Camera's IR receiver blocked or not enabled; Out of range. | Replace CR2025 battery in the remote; Ensure camera's IR receiver is clear and enabled in camera settings; Operate within 8 meters (26 feet) of the camera. |
| Mae allbwn fflach yn rhy wan/gryf. | Manual power setting incorrect; Distance to subject too far/close. | Adjust manual power setting using + and - buttons; Move closer or further from the subject; Consider using bounce flash or diffuser for softer light. |
7. manylebau
| Nodwedd | Manylyn |
|---|---|
| Rhif Canllaw | 38 (ISO 100) |
| Modd Fflach | M, S1, S2 |
| Ongl Cylchdro Fertigol | 0 i 90 gradd |
| Ongl Cylchdro Llorweddol | 0 i 270 gradd |
| Cyflenwad Pŵer | 4 x batris AA (alcalin neu Ni-MH) |
| Light Quantity Output Control | 1/8 - increment stop |
| Tymheredd Lliw | 5600K |
| Hyd Fflach | 1/300e - 1/20000e |
| Dimensions (Flash) | 190mm x 75mm x 55mm (tua 7.5 x 3 x 2.2 modfedd) |
| Net Weight (Flash) | 0.63 pwys / 286 g |
| Ystod Anghysbell Di-wifr | Hyd at 8 metr (26 troedfedd) |
| Batri Pell Di-wifr | CR2025 |
| Rhif Model | 90091225 |
8. Gwarant a Chefnogaeth
Neewer products are designed for reliability and performance. For warranty information and technical support, please refer to the official Neewer websafle neu cysylltwch â'u gwasanaeth cwsmeriaid yn uniongyrchol. Cadwch eich derbynneb prynu fel prawf o brynu ar gyfer unrhyw hawliadau gwarant.
Am gymorth pellach, ewch i: www.neewer.com/support
