SKMEI 9058 Business Men's Quartz Watch - Instruction Manual

Rhagymadrodd

Thank you for choosing the SKMEI 9058 Business Men's Quartz Watch. This manual provides essential information for the proper setup, operation, and maintenance of your new timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.

Delwedd: Blaen view of the SKMEI 9058 watch, showcasing its classic design with Roman numerals and a brown leather strap.

Gosod

Arolygiad Cychwynnol

Upon unboxing, inspect your watch for any visible damage. The watch comes with a pre-installed CR2 battery, designed for approximately 2 years of life.

Gosod yr Amser a'r Dyddiad

1. I osod y dyddiad: Gently pull the crown (the knob on the side of the watch) out to the first position. Rotate the crown clockwise or counter-clockwise until the desired date is displayed.
2. I osod y amser: Pull the crown out to the second position. Rotate the crown to move the hour and minute hands to the correct time. Ensure you account for AM/PM if setting the date, as the date changes at midnight.
3. Once the time and date are set, push the crown back into its original position to engage the movement and start the watch.

Delwedd: Cefn view of the SKMEI 9058 watch, displaying the stainless steel case back and the buckle clasp of the leather strap.

Cyfarwyddiadau Gweithredu

Your SKMEI 9058 watch is an analog timepiece powered by a precise Japanese quartz movement. It displays hours, minutes, seconds, and the current date.

• Time Reading: The watch features a classic analog dial with Roman numeral hour markers. The longer hand indicates minutes, the shorter hand indicates hours, and the thin sweeping hand indicates seconds.
• Arddangos dyddiad: The date window is located on the dial, typically at the 3 o'clock position, and updates automatically every 24 hours.

Cynnal a chadw

Glanhau

To maintain the appearance of your watch, wipe the case and mineral glass dial window with a soft, dry cloth. For the leather strap, use a slightly damp cloth and allow it to air dry. Avoid using harsh chemicals or abrasive materials.

Gwrthiant Dŵr

This watch is rated for 30 meters (98 feet) water resistance. This means it is suitable for daily use, such as hand washing, rain, and splashes. However, it is not suitable for hot water baths, showering, diving, or any underwater activities. Always ensure the crown is fully pushed in before any contact with water. Do not pull the crown while the watch is in water.

Image: The SKMEI 9058 watch shown with water splashing around it, illustrating its water-resistant capabilities for daily exposure.

Gofal Strap

The watch features a PU leather strap. To prolong its life, avoid prolonged exposure to direct sunlight, extreme temperatures, and excessive moisture. If the strap becomes wet, dry it thoroughly with a soft cloth before wearing.

Delwedd: Manwl view of the watch's PU leather strap, highlighting its texture and the buckle mechanism.

Datrys problemau

• Oriawr ddim yn rhedeg: Ensure the crown is fully pushed in. If the watch still does not run, the battery may need replacement.
• Amser/dyddiad anghywir: Refer to the "Setting the Time and Date" section to re-adjust.
• Condensation under crystal: If condensation appears, it may indicate a breach in water resistance. Avoid further water exposure and seek professional inspection.

Manylebau

Gwarant a Chefnogaeth

Specific warranty details for the SKMEI 9058 watch are not provided in the product information. For warranty claims or technical support, please refer to the retailer where the watch was purchased or contact SKMEI customer service directly through their official channels. Keep your proof of purchase for any warranty-related inquiries.