FOSTEX PM0.3H(B) Active Speaker System User Manual

1. Rhagymadrodd

Diolch am brynuasing the FOSTEX PM0.3H(B) Active Speaker System. This manual provides essential information for the safe and efficient operation of your new speakers. Please read it thoroughly before use and retain it for future reference.

Nodweddion Allweddol:

• 2-way bass reflex design for balanced audio reproduction.
• Powerful 15W + 15W (RMS) output.
• Wide frequency response from 110Hz to 40kHz.
• Compact design suitable for various desktop audio setups.

2. Gwybodaeth Diogelwch

Please observe the following safety precautions to prevent electric shock, fire, or other hazards:

• Amlygiad Dŵr: Do not use the device where water can directly come into contact with the main unit. This includes avoiding placement near sinks, bathtubs, or in excessively humid environments.
• Amodau Annormal: Do not use the device if it is in an abnormal condition, such as emitting smoke, unusual odors, or strange noises. Immediately disconnect the power and contact customer support.
• Awyru: Ensure adequate ventilation around the speakers. Do not block ventilation openings.
• Ffynhonnell Pwer: Use only the provided AC adapter and power cord. Ensure the power outlet matches the voltage gofynion.
• Trin: Trin y siaradwyr yn ofalus. Osgowch eu gollwng neu eu rhoi dan ddylanwad effeithiau cryf.

3. Cynnwys Pecyn

Gwiriwch fod yr holl eitemau canlynol wedi'u cynnwys yn eich pecyn:

• FOSTEX PM0.3H(B) Active Speaker System (1 pair)
• Addasydd AC
• Cebl Siaradwr (1.5m)
• Stereo Mini to RCA x 2 Cable (1.5m)
• Llawlyfr Defnyddiwr (y ddogfen hon)

Image: FOSTEX PM0.3H(B) Active Speaker System with its accessories, including the AC adapter, speaker cable, and stereo mini to RCA cable.

Nodyn: An unboxing video demonstrating the package contents and initial setup would typically be embedded here if available from the seller. This video would visually guide you through identifying each component.

4. Cynnyrch Drosview

Familiarize yourself with the various parts and controls of your FOSTEX PM0.3H(B) Active Speaker System.

4.1 Blaen View

Delwedd: Blaen view of the active speaker, featuring the tweeter at the top, the woofer at the bottom, and the Fostex logo with a blue power indicator LED.

• Trydarwr: Reproduces high-frequency sounds.
• Woofer: Reproduces mid-range and low-frequency sounds.
• Dangosydd Pwer LED: Illuminates blue when the speaker is powered on.

4.2 Rear Panel (Active Speaker)

Image: Rear panel of the active speaker, detailing the volume control knob, RCA input (Input A), stereo mini input (Input B), L-OUT for connecting to the passive speaker, and the DC power input.

• Knob CYFROL: Yn addasu'r gyfrol allbwn gyffredinol. Trowch yn glocwedd i gynyddu, yn wrthglocwedd i leihau.
• INPUT A (RCA): Stereo RCA input jacks for connecting audio sources.
• INPUT B (Stereo Mini): 3.5mm stereo mini-jack input for connecting portable audio devices or computers.
• L-OUT: Output terminal for connecting the active speaker to the passive speaker using the supplied speaker cable.
• DC YN: Power input jack for the AC adapter.
• Rhif CYFRES: Unique serial number for the unit.

4.3 Rear Panel (Passive Speaker)

Image: Rear panel of the passive speaker, showing the L-IN input for connection to the active speaker.

• L-IN: Input terminal for connecting the passive speaker to the active speaker using the supplied speaker cable.

5. Gosod

5.1 Lleoliad Siaradwyr

Place the speakers on a stable, flat surface. For optimal stereo imaging, position the speakers equidistant from your listening position, forming an equilateral triangle. Ensure there is sufficient space behind the speakers for ventilation and cable connections.

5.2 Cysylltu'r Siaradwyr

1. Connect the supplied speaker cable (1.5m) from the L-ALLU terminal on the active speaker to the L-IN terminal on the passive speaker. Ensure a secure connection.

5.3 Cysylltu Ffynonellau Sain

You can connect audio sources using either the RCA inputs or the stereo mini input:

• RCA Input (INPUT A): Use the supplied stereo mini to RCA x 2 cable to connect devices with RCA outputs (e.g., CD players, audio interfaces) to the MEWNBWN A. jaciau.
• Stereo Mini Input (INPUT B): Use a 3.5mm stereo mini cable (not supplied, unless the stereo mini to RCA cable is used with an adapter) to connect devices with a stereo mini output (e.g., smartphones, computers) to the MEWNBWN B. jac.

5.4 Pŵer Cysylltu

1. Cysylltwch yr addasydd AC a gyflenwir â'r DC MEWN jack on the active speaker.
2. Plug the AC adapter into a suitable wall outlet. The power indicator LED on the front of the active speaker will illuminate blue.

6. Cyfarwyddiadau Gweithredu

6.1 Pŵer Ymlaen/Diffodd

The speakers power on automatically when the AC adapter is connected to a power source. To turn off the speakers, disconnect the AC adapter from the wall outlet.

6.2 Addasu'r Sain

Cylchdroi y CYFROL knob on the rear panel of the active speaker to adjust the sound level. Turn clockwise to increase volume and counter-clockwise to decrease it. Start with a low volume and gradually increase it to a comfortable listening level.

6.3 Dewis Mewnbwn

The PM0.3H(B) supports two audio inputs (RCA and Stereo Mini). If both inputs are connected, the speaker system will mix the audio signals. To listen to a single source, ensure only that source is connected or powered on.

7. cynnal

7.1 Glanhau

• Before cleaning, disconnect the power adapter from the wall outlet.
• Wipe the speaker cabinets with a soft, dry cloth.
• Peidiwch â defnyddio glanhawyr sgraffiniol, cwyrau na thoddyddion gan y gallant niweidio'r gorffeniad.

7.2 Storio

When not in use for extended periods, store the speakers in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to keep the original packaging for safe storage and transport.

8. Datrys Problemau

If you encounter any issues with your FOSTEX PM0.3H(B) speakers, refer to the following common problems and solutions:

8.1 Dim Sain

• Gwirio pŵer: Ensure the AC adapter is securely connected to both the speaker and a working wall outlet. Verify the power indicator LED is blue.
• Gwirio Cyfrol: Confirm the VOLUME knob on the active speaker is not set to minimum (OFF) and the volume on your audio source is turned up.
• Gwirio Cysylltiadau: Ensure all audio cables (RCA, stereo mini, and the speaker cable between active and passive units) are securely connected.
• Test Audio Source: Try connecting a different audio source to rule out issues with your primary device.

8.2 Sain ystumiedig

• Adjust Volume Levels: Reduce the volume on both the speakers and your audio source. Overdriving either can cause distortion.
• Check Cable Quality: Ensure audio cables are not damaged or poorly shielded, which can introduce noise.
• Ansawdd Ffynhonnell: Sain o ansawdd isel files or streaming can result in distorted sound.

8.3 Only One Speaker Producing Sound

• Cebl Siaradwr: Verify the speaker cable connecting the active and passive units is properly and securely connected at both ends.
• Audio Source Balance: Check the balance settings on your audio source.
• Cysylltiad Mewnbwn: Ensure the stereo mini or RCA cables are fully inserted and not loose.

9. manylebau

Image: Dimensions of a single FOSTEX PM0.3H(B) speaker.

10. Gwarant a Chefnogaeth

For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official FOSTEX websafle. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.

FOSTEX Official Websafle: www.fostex.jp