PROFLO PFWSC6860 Alvord Widespread Bathroom Faucet User Manual

Rhagymadrodd

This manual provides detailed instructions for the installation, operation, and maintenance of your PROFLO PFWSC6860 Alvord Widespread Bathroom Faucet. Please read this guide thoroughly before beginning installation or use to ensure proper function and longevity of your product. Retain this manual for future reference.

Image: PROFLO brand logo, a blue oval with 'PROFLO' written in white.

Gwybodaeth Diogelwch

Dilynwch ragofalon diogelwch sylfaenol bob amser wrth osod neu wasanaethu gosodiadau plymio. Gallai methu â dilyn y cyfarwyddiadau hyn arwain at ddifrod i eiddo neu anaf personol.

• Diffoddwch y prif gyflenwad dŵr cyn ei osod.
• Gwisgwch sbectol diogelwch a menig yn ystod y gosodiad.
• Ensure all local plumbing and building codes are met.
• Peidiwch â gor-dynhau'r cysylltiadau, gan y gallai hyn achosi difrod.
• If you are unsure about any part of the installation, consult a qualified plumber.

Cynnwys Pecyn

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact PROFLO customer service.

• Cynulliad Pigfaen
• Hot Water Handle Assembly
• Cold Water Handle Assembly
• Cynulliad Draen Pop-Up
• Mounting Hardware (washers, nuts)
• Water Supply Lines (typically included or purchased separately)

Image: A chrome widespread bathroom faucet with a high-arc spout and two separate lever handles, along with a pop-up drain rod visible behind the spout.

Manylebau

Gosodiad

This section outlines the general steps for installing your widespread bathroom faucet. Specific details may vary based on your sink and plumbing setup.

1. Paratowch y sinc: Ensure the sink deck has three pre-drilled holes for a widespread faucet. Clean the area around the holes.
2. Gosod Dolenni: Insert the hot and cold water handle assemblies into the outer holes of the sink deck. Secure them from underneath with washers and mounting nuts. Ensure the handles are oriented correctly.
3. Install Faucet Spout: Insert the faucet spout assembly into the center hole of the sink deck. Secure it from underneath with the provided washer and mounting nut.
4. Cysylltu Llinellau Dŵr: Connect the hot and cold water supply lines to the corresponding handle assemblies and then to your home's hot and cold water supply valves. Connect the flexible lines from the handles to the faucet spout. Hand-tighten connections, then use a wrench for a final quarter-turn. Do not overtighten.
5. Gosod Draen Naidlen: Follow the instructions provided with the pop-up drain assembly. Typically, this involves placing the drain body into the sink drain hole with a gasket, securing it from underneath, and connecting the lift rod mechanism to the faucet spout.
6. Prawf am ollyngiadau: Once all connections are secure, slowly turn on the main water supply. Check all connections for leaks. If leaks are present, gently tighten the connections until they stop.
7. Fflysiwch y tap: Remove the aerator from the spout. Turn on both hot and cold water for a few minutes to flush out any debris from the lines. Turn off the water, reattach the aerator.

Gweithrediad

Your PROFLO PFWSC6860 faucet features two lever handles for precise control of water temperature and flow, and a pop-up drain for basin rheolaeth.

• Llif Dŵr: Lift the hot water handle (typically on the left) to increase hot water flow. Lift the cold water handle (typically on the right) to increase cold water flow.
• Rheoli tymheredd: Adjust the hot and cold handles simultaneously to achieve the desired water temperature.
• Draen Naidlen: Push down on the lift rod located behind the faucet spout to close the drain and fill the basin. Pull up on the lift rod to open the drain and allow water to empty.

Cynnal a Chadw a Glanhau

Proper care will help maintain the finish and performance of your faucet.

• Glanhau Rheolaidd: Glanhewch y tap yn rheolaidd gyda lliain meddal a sebon ysgafn. Rinsiwch yn drylwyr gyda dŵr glân a sychwch gyda lliain meddal i atal smotiau dŵr.
• Osgoi glanhawyr llym: Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the chrome finish.
• Cynnal a Chadw Awyrydd: If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse it before reattaching.
• Glanhau Draeniau: Periodically remove and clean the pop-up drain stopper to prevent buildup and ensure proper drainage.

Datrys problemau

Cyfeiriwch at yr adran hon am broblemau cyffredin a'u datrysiadau.

Gwarant a Chefnogaeth

PROFLO products are manufactured to high-quality standards. For warranty information or technical assistance, please contact PROFLO customer service directly. Keep your purchase receipt as proof of purchase.

Am gymorth pellach, ewch i wefan swyddogol PROFLO websafle neu cysylltwch â'u llinell cymorth cwsmeriaid.