Rain Bird SST900IN

Rain Bird SST900IN 9-Zone Indoor Sprinkler System Controller User Manual

Model: SST900IN

1. Cynnyrch Drosview

The Rain Bird SST900IN is a 9-zone indoor sprinkler/irrigation system timer/controller designed for residential use. It features intuitive zone-by-zone programming, allowing for customized watering schedules tailored to specific areas of your yard. This model replaces the SST900I and includes enhanced features for efficient water management.

Rain Bird SST900IN 9-Zone Indoor Sprinkler System Controller

Figure 1: Rain Bird SST900IN 9-Zone Indoor Sprinkler System Controller.

Cydrannau wedi'u Cynnwys:

  • Rain Bird SST900IN Timer/Controller
  • CR2032 lithium ion backup battery
  • Transformer power plug with 6' cord
  • Canllaw Gosod (y llawlyfr hwn)

2. Gosod a Gosod

The SST900IN controller is designed for indoor installation within a garage, home, or waterproof shed. Installation typically requires only a screwdriver.

Camau Gosod:

  1. Record Old Settings: Before disconnecting an old timer, note down all existing settings including start times, run times, and watering days for each zone. This information will be used for programming the new SST900IN controller.
  2. Pŵer Datgysylltu: Unplug the power supply to the old timer.
  3. Labelu Gwifrau: Label each sprinkler wire with a small piece of tape corresponding to its zone number.
  4. Datgysylltu Gwifrau: Carefully disconnect all sprinkler wires from the old timer.
  5. Remove Old Timer: Remove the mounting screws and take the old timer off the wall.
  6. Mount New Timer: Hang the new SST900IN controller in its place and secure it using the provided mounting screws.
  7. Cysylltu Gwifrau: With the wire cover removed, connect each labeled sprinkler wire to the corresponding numbered zone terminal on the new controller. Connect the common wire to the common terminal.
  8. Pwer Cysylltu: Attach the power transformer to the controller and plug it into a nearby 120 VAC outlet.
Connecting wires to the Rain Bird SST900IN controller terminals

Figure 2: Wiring connections for the Rain Bird SST900IN controller.

Prawf Cychwynnol:

To ensure the timer is connected properly, activate each zone using the 'Water All Zones Now' or 'Water 1 Zone Now' feature. Observe that each zone's sprinklers operate as expected.

Video 1: This official seller video demonstrates the installation and basic programming of the Rain Bird SST timers, including wiring and initial setup steps.

3. Cyfarwyddiadau Gweithredu

The SST900IN controller allows for simple, zone-by-zone programming to customize your watering schedule.

Close-up of Rain Bird SST900IN display and control buttons

Ffigur 3: Agos view of the SST900IN display and control panel.

Setting Current Time and Date:

  1. Trowch y deial i'r AMSER SET sefyllfa. Defnyddiwch y Allweddau saeth UP / DOWN to adjust the current time.
  2. Trowch y deial i'r DYDDIAD SET sefyllfa. Defnyddiwch y LEFT UP/DOWN arrows to set the year, and the RIGHT UP/DOWN arrows to set the month and day.

Scheduling Watering:

Program each zone individually for precise control.

  1. Turn the dial to select the desired zone (e.g., Zone 1, Zone 2, etc.).
  2. Defnyddiwch y LEFT UP/DOWN arrows to set the start time for watering.
  3. Defnyddiwch y RIGHT UP/DOWN arrows to set the run time (watering duration) in minutes.
  4. Select watering days:
    • Gwasgwch y white RUN DAYS buttons (Sun, Mon, Tue, etc.) to select specific days of the week.
    • Fel arall, pwyswch y EVEN/ODD DAYS button to water on even or odd-numbered days of the month.
    • For a cyclic watering schedule, press the CYCLIC WATERING button. Defnyddiwch y LEFT UP/DOWN arrows to select the number of days between watering cycles, and the RIGHT UP/DOWN arrows to adjust the date when the first watering session will start.
  5. To enable multiple start times per day (up to four), press the 1st TIME, 2nd TIME, 3rd TIME, or 4th TIME buttons and set the start time and run time for each. The timer automatically orders times from early to later.
  6. Repeat these steps for all remaining zones.

Addasiad Tymhorol:

Adjust watering times for all zones simultaneously to account for seasonal weather variations (e.g., hotter/drier or cooler/rainier periods).

  1. Trowch y deial i ADDAS TYMOROL.
  2. Defnyddiwch y Botymau saeth UP / DOWN to adjust the watering time percentage for all zones (from -90% to +100%).
  3. To return to normal watering times, change the percentage back to 0%.

Oedi Glaw:

Temporarily suspend watering for a set period.

  1. Trowch y deial i OEDI GLAW.
  2. Defnyddiwch y Botymau saeth UP / DOWN to set the delay time for up to 72 hours. Watering will automatically resume once the delay ends.

Gweithrediad â llaw:

Manually start watering for all zones or a single zone.

  1. Trowch y deial i RHEDEG AUTO.
  2. To water all zones: Press the green 'WATER ALL ZONES NOW' button. The display will show the current watering zone and remaining time.
  3. To water one zone: Turn the dial to select the desired zone. Press the green 'WATER 1 ZONE NOW' button. The display will show the current watering zone and remaining time. The default run time is 10 minutes, which can be adjusted using the Botymau saeth UP / DOWN.
  4. To stop manual watering, turn the dial to ODDI AR. Remember to return the dial to RHEDEG AUTO to resume regular programmed watering.

4. cynnal

The SST900IN controller is designed for durability and minimal maintenance.

  • Sealed Case: The sealed case protects internal components from moisture, insects, and grime.
  • Amddiffyniad Ymchwydd: Built-in surge protection guards against damage from lightning strikes or power surges.
  • Cof wrth gefn: All timer settings are stored indefinitely in memory, eliminating the need to re-program in case of a power outage. A CR2032 lithium ion backup battery is included for this purpose.

5. Datrys Problemau

The controller features automatic troubleshooting capabilities.

  • Valve/Wiring Short Detection: If a short is detected in a valve or its wiring, the timer will suspend watering to the affected zone and display a warning message with the corresponding valve number. Inspect the wiring and valve for any issues.

6. manylebau

  • Brand: Aderyn Glaw
  • Model: SST900IN
  • Parthau: 9-Zone/Station
  • Gosod: Dan do
  • Deunydd: Plastig
  • Lliw: Llwyd/Gwyrdd
  • Pwysau Eitem: 3.74 owns
  • Math Arddangos: LCD neu LED
  • Tymheredd Gweithredu: 10 Gradd Celsius (50°F)
  • Mewnbwn Trydanol: 120 VAC/0.17 AMP / 60Hz
  • Allbwn Trydanol: 25.5 VAC/0.65 AMP / 60Hz
  • Cydnawsedd: Most 24 VAC irrigation valves, master valve or pump start relay, rain sensor.
  • Tystysgrifau: UL, cUL certified
  • UPC: 077985004668
Dimensions of the Rain Bird SST900IN controller

Figure 4: Approximate dimensions of the Rain Bird SST900IN controller.

7. Gwarant a Chefnogaeth

This product is covered by a manufacturer's warranty. For specific warranty details and claims, please refer to the warranty information provided with your purchase or contact Rain Bird customer support.

Rain Bird is committed to 'The Intelligent Use of Water™', providing high-quality irrigation products and support.

Dogfennau Cysylltiedig - SST900IN

Cynview Rain Bird Simple To Set (SST) Timer Installation and User Manual
Comprehensive guide for installing, programming, and operating the Rain Bird Simple To Set (SST) irrigation timer. Includes setup instructions, feature explanations, and troubleshooting tips for the SST-600in model.
Cynview Rain Bird Simple to Set Timer (SST) Frequently Asked Questions and Guide
Comprehensive guide to the Rain Bird Simple to Set Timer (SST) irrigation controller, covering product selection, installation, programming, troubleshooting, and features. Find answers to common questions about zone setup, watering schedules, rain sensors, and power issues.
Cynview Rain Bird ISM Sprinkler Timer Instruction Manual
This manual provides instructions for installing, programming, and operating the Rain Bird ISM Sprinkler Timer. It covers timer basics, programming, station setup, and troubleshooting.
Cynview Llawlyfr Defnyddiwr Rheolydd Rain Bird ESP-TM2: Gosod, Rhaglennu a Gweithredu
Llawlyfr defnyddiwr cynhwysfawr ar gyfer rheolydd dyfrhau Rain Bird ESP-TM2. Yn darparu cyfarwyddiadau manwl ar osod, gwifrau, rhaglennu sylfaenol ac uwch, gweithredu â llaw, datrys problemau cyffredin, a gwybodaeth diogelwch ar gyfer dyfrio lawnt a gerddi yn effeithlon.
Cynview Rain Bird ESP-9V Battery-Operated Irrigation Timer
The Rain Bird ESP-9V is a durable and easy-to-use battery-operated irrigation controller designed for reliable automatic watering in challenging conditions. It features a weather-resistant design, long battery life, and intuitive programming for efficient zone management. Learn about its features, specifications, and model options.
Cynview Amserydd Pen Pibell Digidol Rain Bird 1ZEHTMR: Canllaw Gosod a Rhaglennu
Canllaw cynhwysfawr ar gyfer yr amserydd pen pibell digidol Rain Bird 1ZEHTMR, yn manylu ar y gosodiad, rheoli batri, rhaglennu amserlenni dyfrio awtomatig, swyddogaethau diystyru â llaw, a nodweddion oedi glaw ar gyfer dyfrhau gardd gorau posibl.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.