Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce User Manual

1. Rhagymadrodd

Diolch am brynuasing the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce. This product is designed to provide efficient and adjustable lighting for various indoor environments. This manual provides essential information for safe installation, proper operation, and effective maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation or use, and retain them for future reference.

1.1 Gwybodaeth Ddiogelwch

• RHYBUDD: Risg sioc drydanol. Datgysylltwch y pŵer wrth y blwch ffiwsiau neu'r torrwr cylched cyn ei osod neu ei wasanaethu.
• Rhaid i bob cysylltiad trydanol fod yn unol â chodau lleol, ordinhadau, neu'r Cod Trydan Cenedlaethol (NEC). Ymgynghorwch â thrydanwr cymwys os nad ydych yn gyfarwydd â chysylltiadau gwifrau trydanol priodol.
• Bwriedir y gosodiad hwn ar gyfer defnydd dan do yn unig. Peidiwch â'i amlygu i ddŵr na lleithder.
• Do not attempt to alter the fixture. Any modifications may void the warranty and create a safety hazard.
• Trin y gosodiad yn ofalus. Osgowch ei ollwng na'i roi dan effeithiau cryf.

Ffigur 1: Blaen view of the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce in Gloss White finish.

2. Cydrannau wedi'u Cynnwys

Carefully unpack your fixture and identify all parts. Ensure all components are present and undamaged before discarding packaging materials.

• 1 x LED Bullet Head Miter Arm Wall Sconce (18" Arm, Gloss White)
• 1 x Mounting Hardware Kit (includes mounting plate, screws, wire nuts)
• 1 x Llawlyfr Cyfarwyddiadau

Ffigur 2: Ongl view of the Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce, highlighting the miter arm and bullet head.

3. Cyfarwyddiadau Gosod

Pwysig: Before starting installation, ensure the power supply to the circuit is turned off at the circuit breaker or fuse box. If you are unsure about electrical wiring, consult a qualified electrician.

1. Paratowch yr Ardal Gosod: Ensure the wall surface is clean, dry, and structurally sound to support the fixture.
2. Diffodd Pŵer: Locate the circuit breaker or fuse box and turn off the power to the wall switch or outlet where the fixture will be installed. Verify power is off using a voltage profwr.
3. Atodwch Plât Mowntio: Secure the mounting plate (included in hardware kit) to the junction box in the wall using the provided screws. Ensure the plate is firmly attached.
4. Creu Cysylltiadau Trydanol:
   • Cysylltwch y du gwifren o'r gosodiad i'r du gwifren (boeth) o'r blwch cyffordd gan ddefnyddio cneuen gwifren.
   • Cysylltwch y gwyn gwifren o'r gosodiad i'r gwyn gwifren (niwtral) o'r blwch cyffordd gan ddefnyddio cneuen gwifren.
   • Cysylltwch y ddaear gwifren (copr noeth neu wyrdd) o'r gosodiad i'r ddaear wire from the junction box and to the mounting plate using a ground screw.

   Ensure all wire connections are secure and properly insulated with wire nuts.
5. Gosod y gêm: Carefully tuck all wires into the junction box. Align the fixture's back plate with the mounting plate and secure it using the provided screws.
6. Adfer Pwer: Unwaith y bydd y gosodiad wedi'i osod yn ddiogel, trowch y pŵer yn ôl ymlaen wrth y torrwr cylched. Profwch y gosodiad golau.

4. Cyfarwyddiadau Gweithredu

The Troy Lighting LBLEDWT3LBM018 LED Wall Sconce is designed for straightforward operation.

• Pŵer ymlaen / i ffwrdd: Operate the fixture using the standard wall switch connected to its circuit.
• Addasu'r Golau: The bullet head of the sconce is adjustable, allowing you to direct the light beam as needed. Gently pivot the bullet head to achieve the desired lighting angle.
• Rheolaeth o Bell (os yw'n berthnasol): If your installation includes a compatible remote control system (as indicated by "Control Method: Remote" in specifications), refer to the remote control's specific instructions for pairing and operation.

5. Cynnal a Chadw a Gofal

Proper care will ensure the longevity and appearance of your Troy Lighting fixture.

• Glanhau: Turn off power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Ffynhonnell Ysgafn LED: The LED light source in this fixture is non-removable and designed for long-term use. Do not attempt to replace the LED bulb.
• Arolygiad: Periodically check for any loose connections or signs of wear. If any issues are observed, disconnect power and consult a qualified electrician.

6. Datrys Problemau

If you experience issues with your fixture, refer to the following common problems and solutions:

If these steps do not resolve the issue, please contact customer support or a qualified electrician.

7. Manylebau Cynnyrch

8. Gwybodaeth Gwarant

This Troy Lighting product is covered by a Gwarant cyfyngedig 1 mlynedd from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. For warranty claims, please retain your proof of purchase and contact customer support.

9. Cefnogaeth i Gwsmeriaid

If you have any questions, require assistance with installation, or need to report a problem with your Troy Lighting LBLEDWT3LBM018 LS LED Wall Sconce, please contact Troy Lighting customer service or your retailer. Please have your model number (LBLEDWT3LBM018) and proof of purchase ready when contacting support.

For more information about Troy Lighting products, you may visit the official Troy Lighting website or their store on Amazon: Troy Lighting Amazon Store.