Universal Office Chair Assembly Manual

1. Gwybodaeth Bwysig am Ddiogelwch

Darllenwch yr holl gyfarwyddiadau yn ofalus cyn eu cydosod a'u defnyddio. Cadwch y llawlyfr hwn i gyfeirio ato yn y dyfodol.

• Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or damaged.
• Assemble the chair on a soft, clean surface to prevent scratching.
• Do not overtighten screws during assembly, as this may damage the components.
• Cadwch blant ac anifeiliaid anwes i ffwrdd o'r ardal ymgynnull. Gall rhannau bach fod yn berygl tagu.
• Only use the chair for its intended purpose.
• Peidiwch â sefyll ar y gadair.

2. Cynnwys Pecyn

Verify that all components listed below are included in your package.

3. Cyfarwyddiadau Cymanfa

Follow these steps carefully to assemble your office chair.

1. Atodwch y Castwyr i'r Sylfaen Seren: Insert each caster (F) into the holes at the end of each leg of the star base (E). Push firmly until they click into place.
2. Mewnosod Codiad Nwy: Place the gas lift cylinder (D) into the center hole of the assembled star base (E). Ensure it sits securely.
3. Atodwch y Plât Mecanwaith i'r Sedd: Align the mechanism plate (G) with the pre-drilled holes on the underside of the seat cushion (B). Ensure the front of the mechanism plate faces the front of the seat. Secure with four M8x25mm screws (I) using the Allen wrench (J).
4. Cysylltwch y breichiau â'r sedd: Attach the armrests (C) to the underside of the seat cushion (B) using four M6x20mm screws (H), two per armrest. Do not fully tighten yet.
5. Attach Chair Back to Armrests: Align the chair back (A) with the remaining holes on the armrests (C). Secure with the remaining four M6x20mm screws (H), two per armrest. Now, fully tighten all armrest screws.
6. Cysylltu Cynulliad y Sedd â'r Lifft Nwy: Carefully place the assembled seat and back onto the gas lift cylinder (D) protruding from the star base. Press down firmly to secure.

Your office chair is now assembled.

4. Cyfarwyddiadau Gweithredu

Familiarize yourself with the chair's adjustment features for optimal comfort.

• Addasiad Uchder: I godi'r sedd, codwch y lifer sydd wedi'i leoli o dan ochr dde'r sedd wrth dynnu'ch pwysau oddi ar y gadair. I ostwng y sedd, codwch y lifer wrth eistedd. Rhyddhewch y lifer ar yr uchder a ddymunir.
• Tilt Lock/Unlock: Pull the same lever outwards to unlock the tilt function, allowing the chair back to recline. Push the lever inwards to lock the chair back in an upright position.
• Tensiwn Tilt: Rotate the round knob located under the front-center of the seat to adjust the tension of the tilt mechanism. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• Armrest Adjustment (if applicable): Some models feature adjustable armrests. Look for buttons or levers on the armrests to adjust their height or pivot.

5. cynnal

Regular maintenance will prolong the life of your office chair.

• Glanhau: Sychwch arwynebau gyda meddal, damp cloth. For fabric upholstery, use a mild fabric cleaner. Avoid harsh chemicals or abrasive cleaners.
• Gwiriad Fastener: Gwiriwch yr holl sgriwiau a bolltau o bryd i'w gilydd i sicrhau eu bod yn dynn. Ail-dynhau os oes angen.
• Caster Cleaning: Remove any hair or debris that may accumulate around the casters to ensure smooth movement.
• Iro: The gas lift cylinder is maintenance-free. Do not attempt to lubricate it.

6. Datrys Problemau

Cyfeiriwch at yr adran hon am atebion i broblemau cyffredin.

7. manylebau

Key technical details of your office chair.