Thomson CP284

Llawlyfr Defnyddiwr Cloc Larwm Radio Thomson CP284

Rhagymadrodd

This manual provides detailed instructions for the setup, operation, and maintenance of your Thomson CP284 Radio Alarm Clock. Please read this manual thoroughly before using the device to ensure proper function and safety. Keep this manual for future reference.

Gwybodaeth Diogelwch

  • Peidiwch ag amlygu'r ddyfais i law, lleithder, na lleithder gormodol.
  • Do not disassemble the device. Refer all servicing to qualified personnel.
  • Sicrhewch awyru priodol o amgylch yr uned i atal gorboethi.
  • Use only the specified power adapter provided with the unit.
  • Cadwch y ddyfais i ffwrdd o olau haul uniongyrchol, ffynonellau gwres, a fflam agored.
  • Osgowch osod yr uned ar arwynebau ansefydlog.

Cynnwys Pecyn

  • Thomson CP284 Radio Alarm Clock Unit
  • Addasydd Pŵer
  • Llawlyfr Defnyddiwr (y ddogfen hon)

Cynnyrch Drosview

Familiarize yourself with the components and controls of your Thomson CP284 Radio Alarm Clock.

Thomson CP284 Radio Alarm Clock front view with display and projector

Delwedd 1: Blaen view of the Thomson CP284 Radio Alarm Clock. The image shows the main display indicating the current time (10:55), FM radio frequency (105.5), and two alarm settings (7:15 and 8:30). The left side features a speaker grille, and the top surface has the 'THOMSON' logo. The overall design is sleek and black.

Key Components and Controls

  • Prif Arddangosfa: Shows current time, radio frequency, and alarm settings with adjustable brightness.
  • Lens y Taflunydd: Located on the side, projects the time onto a wall or ceiling.
  • Grille Siaradwr: For audio output from the radio or alarm sounds.
  • Botymau Panel Uchaf: Includes controls for time setting (Hour, Minute), display brightness (Preset), alarm setup (Alarm 1, Alarm 2), radio memory (Memory), sleep timer/radio on/off (Sleep), and alarm snooze (Snooze).
  • Botymau Cyfrol: Typically located on the side, near the speaker, for adjusting audio volume.
  • Projector Controls: Buttons or dials for turning the projector on/off, rotating the projected image, and adjusting focus.
  • Adran Batri: Located on the bottom for backup battery (CR2032).

Gosod

  1. Cysylltiad Pwer: Connect the provided power adapter to the DC input jack on the back of the unit and then to a standard wall outlet. The display will light up.
  2. Batri Wrth Gefn (Dewisol): Ar gyfer cadw gosodiadau amser a larwm yn ystod diffodd pŵertages, insert a CR2032 button cell battery (not included) into the battery compartment on the bottom of the unit. Ensure correct polarity.
  3. Gosod Amser Presennol:
    • Pwyswch a dal y Amser/Awr botwm i osod yr awr.
    • Gwasgwch y Munud botwm i osod y funud.
    • Release the buttons to confirm the time setting.
  4. Addasu Disgleirdeb Arddangos: Gwasgwch y Rhagosodedig button repeatedly to cycle through different display brightness levels to suit your preference.

Cyfarwyddiadau Gweithredu

Gweithrediad Radio (FM)

  1. Troi ymlaen / i ffwrdd: Gwasgwch y Cwsg button briefly to turn the radio on or off.
  2. Gorsafoedd Tiwnio: Defnyddiwch y << a >> buttons (often shared with Time/Hour and Minute buttons) to manually tune to a desired FM frequency.
  3. Auto Scan and Store Presets: Pwyswch a dal y Cof button to automatically scan for and store available FM stations.
  4. Rhagosodiadau Dwyn i gof: Gwasgwch y Cof button briefly to cycle through your stored radio stations.
  5. Rheoli cyfaint: Adjust the volume using the dedicated volume buttons, typically located on the side of the unit.

Gosodiadau Larwm

The Thomson CP284 features two independent alarms (Alarm 1 and Alarm 2).

  1. Amser Larwm Gosod: Pwyswch a dal naill ai'r Larwm 1 or Larwm 2 button. The alarm time will flash on the display. Use the Amser/Awr a Munud buttons to set the desired alarm time. Release the alarm button to confirm.
  2. Select Alarm Source: After setting the time, press the Larwm 1 or Larwm 2 button repeatedly to cycle through the available alarm sound options: Buzzer, Radio, or Nature Sounds (e.g., waves, birds).
  3. Larwm Activate / Deactivate: Gwasgwch y Larwm 1 or Larwm 2 button briefly to activate or deactivate the alarm. A corresponding alarm icon will appear or disappear on the display.
  4. Swyddogaeth Snooze: Pan fydd y larwm yn swnio, pwyswch y Ailatgoffa button to temporarily silence it. The alarm will sound again after a few minutes (default snooze time).
  5. Larwm Stop: To turn off the alarm completely, press the corresponding Larwm 1 or Larwm 2 botwm, neu'r Cwsg botwm.

Rhagamcaniad Amser

  • Activate Projector: Locate the projector button (often on the side or back of the unit) to turn the time projection on or off.
  • Rhagamcaniad Cylchdroi: Use the rotation control (often a dial or button near the projector lens) to adjust the orientation of the projected time (e.g., 360-degree rotation) to display it correctly on your desired surface.
  • Addasiad Ffocws: If available, use the focus ring around the projector lens to sharpen the projected image for clarity.

Amserydd Cwsg

The sleep timer allows the radio to play for a set duration before automatically turning off, helping you fall asleep to music or news.

  • Gosod Amserydd Cwsg: Tra bod y radio yn chwarae, pwyswch y Cwsg button repeatedly to cycle through available sleep timer durations (e.g., 90, 60, 30, 15 minutes, OFF). The radio will automatically turn off after the selected time.

Cynnal a chadw

  • Glanhau: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
  • Amnewid Batri: If using the backup battery, replace it annually or when the time settings are no longer retained during power outages. Open the battery compartment, remove the old CR2032 battery, and insert a new one with the correct polarity.
  • Storio: If storing the unit for an extended period, disconnect it from the power outlet and remove the backup battery to prevent leakage.

Datrys problemau

ProblemAchos PosiblAteb
Nid yw'r uned yn pweru ymlaen.Addasydd pŵer heb ei gysylltu neu soced pŵer diffygiol.Ensure the power adapter is securely connected to both the unit and a functional wall outlet. Try a different outlet.
Nid yw'r larwm yn canu.Alarm not activated, volume too low, or incorrect alarm source selected.Verify the alarm is activated (alarm icon visible on display). Check the volume level. Ensure the correct alarm source (Buzzer, Radio, Nature Sound) is selected.
Derbyniad radio gwael.Weak signal or interference from other electronic devices.Extend the FM antenna fully. Reposition the unit for better reception. Move the unit away from other electronic devices that may cause interference.
Amser/gosodiadau wedi'u colli ar ôl diffodd y pŵertage.Mae'r batri wrth gefn wedi marw neu heb ei osod.Install or replace the CR2032 backup battery. Ensure correct polarity.
Projected time is blurry or unclear.Nid yw'r ffocws wedi'i addasu'n gywir.Adjust the focus ring around the projector lens until the image is sharp.

Manylebau

  • Brand: Thomson
  • Model: CP284
  • Dimensiynau (L x W x H): Tua 20.2 x 16 x 15 cm (7.95 x 6.3 x 5.9 modfedd)
  • Pwysau: Tua 700 gram (1.54 pwys)
  • Ffynhonnell Pwer: AC Power Adapter (Input: 100-240V, Output: DC 5V, 1A - specific adapter details may vary)
  • Batri wrth gefn: 1 x CR2032 (not included)
  • Amledd Radio: FM
  • Nodweddion: Dual Alarm, Snooze Function, Sleep Timer, Time Projection, Adjustable Display Brightness, Nature Sounds.

Gwarant a Chefnogaeth

For detailed warranty information and technical support, please refer to the documentation provided at the time of purchase. You may also visit the official Thomson website or contact your local Thomson customer service representative. Please retain your proof of purchase for any warranty claims.

© 2023 Thomson. Cedwir pob hawl.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.