Rockville Power GIG RPG-122K PA System User Manual

Rhagymadrodd

Diolch am brynuasing the Rockville RPG-122K All-In-One DJ/PA Package. This comprehensive system is designed to provide powerful and clear audio for a variety of applications, including DJ events, karaoke, parties, and live performances. This manual provides detailed instructions for setting up, operating, and maintaining your RPG-122K system to ensure optimal performance and longevity.

Gwybodaeth Diogelwch

Darllenwch y cyfarwyddiadau diogelwch hyn yn ofalus cyn gweithredu'r uned. Cadwch y llawlyfr hwn i gyfeirio ato yn y dyfodol.

• Peidiwch ag agor yr uned. Nid oes unrhyw rannau y gall y defnyddiwr eu gwasanaethu y tu mewn. Cyfeiriwch y gwaith cynnal a chadw at bersonél cymwys.
• Peidiwch ag amlygu'r uned hon i leithder na thymheredd eithafol.
• Sicrhewch awyru priodol o amgylch yr uned i atal gorboethi.
• Always connect the power cord to a grounded AC outlet.
• Datgysylltwch y llinyn pŵer yn ystod stormydd mellt a phan na chaiff ei ddefnyddio am gyfnodau hir.
• Ceisiwch osgoi gosod gwrthrychau trwm ar y llinyn pŵer.
• Defnyddiwch atodiadau/ategolion a nodir gan y gwneuthurwr yn unig.

Cynnwys Pecyn

Carefully unpack your RPG-122K system and ensure all items listed below are present and in good condition. If any items are missing or damaged, contact your dealer immediately.

• 1 x Active 12" DJ/PA Speaker
• 1 x Passive 12" DJ/PA Speaker
• 2 x Standiau Siaradwr Tripod Gwydn
• 1 x Meicroffon Wired
• 1 x Clip Meic
• 1 x XLR to XLR Cable (for wired microphone)
• 1 x 19 Ft. 1/4" Cable (for active to passive speaker connection)
• 1 x Power Cable (for active speaker)
• 1 x Rheolaeth Anghysbell Di-wifr
• 1 x Rockville RWM4200VH VHF Wireless Quad HandHeld Microphone System (Receiver + 4 Microphones)
• 1 x Rockville RTR172 17 Foot 2 Channel Twisted Pair RCA Cable
• 1 x Rockville RNRMR10 10' 3.5mm 1/8" TRS to Dual RCA Cable

Figure 1: All components included in the RPG-122K package.

Cynnyrch Drosview

Panel Cefn Siaradwr Gweithredol

Figure 2: Active Speaker Rear Panel Controls and Connections.

• Bluetooth Display: Yn dangos statws y cysylltiad Bluetooth.
• USB/SD Card Slot: Ar gyfer chwarae sain files from USB drives or SD cards.
• Botwm Modd: Switches between Bluetooth, USB, SD, and FM Tuner modes.
• Botwm Chwarae/Seibiant: Controls playback for USB/SD/Bluetooth.
• Botymau Trac Blaenorol/Nesaf: Navigates tracks for USB/SD/Bluetooth.
• Botwm Ailadrodd: Yn ailadrodd y trac cyfredol neu'r holl draciau.
• Prif Gyfrol: Yn addasu cyfaint allbwn cyffredinol y system.
• Rheolyddion Bas/Trebl: Adjusts low and high frequencies for sound customization.
• Mic/Line Input (XLR/1/4" Combo): Connects microphones or line-level devices.
• Line Input (RCA/1/8" TRS): Connects external audio sources like smartphones or laptops.
• Line Output (RCA): Sends audio signal to another powered speaker or mixer.
• Speaker Output (1/4"): Connects to the passive speaker.
• Newid Pwer: Yn troi'r uned ymlaen neu i ffwrdd.
• Mewnbwn AC: Yn cysylltu'r cebl pŵer.
• Clip LED Indicator: Illuminates when the audio signal is clipping (distorting).

Wireless Microphone System (RWM4200VH)

Figure 3: Rockville RWM4200VH Wireless Microphone System.

The RWM4200VH system includes a receiver unit and four handheld wireless microphones. The receiver features individual volume controls for each microphone channel and a digital display for frequency information. It connects to the active speaker via XLR or 1/4" outputs.

Gosod

Gosod Llefarydd

1. Place the two speaker stands on a stable, level surface. Extend the legs fully for maximum stability.
2. Carefully mount the active speaker onto one speaker stand and the passive speaker onto the other. Ensure they are securely seated.
3. Connect the 19 ft. 1/4" cable from the "Speaker Out" jack on the active speaker's rear panel to the "Speaker In" jack on the passive speaker's rear panel.
4. Connect the power cable to the "AC Input" on the active speaker and then to a grounded AC outlet.

Figure 4: Fully assembled RPG-122K PA system.

Wireless Microphone System Setup

1. Place the RWM4200VH wireless microphone receiver near the active speaker.
2. Connect the audio output of the wireless receiver (XLR or 1/4") to one of the "Mic/Line Input" jacks on the active speaker's rear panel.
3. Connect the power adapter for the wireless receiver and plug it into an AC outlet.
4. Insert fresh batteries into each wireless microphone.

Cyfarwyddiadau Gweithredu

Pweru Ymlaen/Diffodd

To power on the system, ensure all connections are secure, then flip the "Power Switch" on the active speaker to the ON position. To power off, flip the switch to the OFF position.

Pâr Bluetooth

1. Press the "Mode" button on the active speaker until "Bluetooth" is displayed. The unit will enter pairing mode.
2. Galluogi Bluetooth ar eich ffôn clyfar neu ddyfais arall.
3. Chwiliwch am "ROCKVILLE" in your device's Bluetooth list and select it to pair.
4. Once connected, you can play audio from your device through the speakers.

Chwarae USB / SD

1. Insert a USB drive or SD card containing MP3 or WMA audio files i mewn i'r slot perthnasol.
2. The unit will automatically switch to USB/SD mode and begin playback. If not, press the "Mode" button.
3. Defnyddiwch y botymau Chwarae/Saib, Blaenorol, a Nesaf i reoli'r chwarae.

Defnydd Meicroffon

• Meicroffon Wired: Connect the wired microphone to the "Mic/Line Input" using the provided XLR cable. Adjust the corresponding channel volume on the active speaker.
• Meicroffonau Di-wifr: Ensure the wireless receiver is powered on and connected to the active speaker. Turn on each wireless microphone. Adjust individual microphone volumes on the wireless receiver and the overall input volume on the active speaker.

Tiwniwr Fm

Press the "Mode" button until "FM" is displayed. Use the Previous/Next buttons to scan for radio stations. The system will automatically save found stations.

Rheolaethau Cymysgydd

• Prif Gyfrol: Controls the overall output level of the entire system. Adjust this to achieve desired loudness without distortion.
• Bas/Trebl: Use these knobs to fine-tune the low and high frequencies of the audio output. Turn Bass up for more low-end punch, and Treble up for more clarity in high frequencies.
• Clip LED: If this LED illuminates frequently, reduce the input volume or master volume to prevent distortion and potential speaker damage.

Cynnal a chadw

Proper maintenance ensures the longevity and performance of your RPG-122K system.

• Glanhau: Use a soft, dry cloth to clean the exterior surfaces of the speakers and receiver. Do not use abrasive cleaners or solvents.
• Storio: When not in use, store the system in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for storage and transport.
• Ceblau: Regularly inspect all cables for signs of wear or damage. Replace any damaged cables immediately to prevent performance issues or safety hazards.

Datrys problemau

If you encounter issues with your RPG-122K system, refer to the table below for common problems and their solutions.

Manylebau

Gwarant a Chefnogaeth

Rockville products are designed and manufactured to the highest standards. This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official Rockville websafle.

If you require technical assistance or have questions regarding the operation of your RPG-122K system, please contact Rockville customer support. Have your product model number and purchase information ready when contacting support.

Gwybodaeth Gyswllt: Please refer to the Rockville websafle neu becynnu eich cynnyrch i gael y manylion cyswllt cymorth cwsmeriaid diweddaraf.