M-Wave M30HCW Bicycle Computer

1. Rhagymadrodd

Thank you for choosing the M-Wave M30HCW Wireless Bicycle Computer. This device is designed to enhance your cycling experience by providing comprehensive data about your rides. It features wireless transmission for a clean setup and a wide range of functions to track your performance and progress. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your device.

Image 1.1: M-Wave M30HCW Bicycle Computer. This image displays the main unit of the M-Wave M30HCW bicycle computer, showcasing its compact design and clear display.

2. Gwybodaeth Diogelwch

• Always prioritize road safety. Do not operate the computer or adjust settings while cycling in traffic.
• Ensure the computer is securely mounted to prevent it from detaching during your ride.
• Cadwch fatris allan o gyrraedd plant. Os caiff ei lyncu, ceisiwch sylw meddygol ar unwaith.
• Gwaredu batris yn unol â rheoliadau lleol. Peidiwch â llosgi.
• The device has an Ingress Protection rating of IP44, meaning it is protected against splashing water from any direction. It is not designed for submersion.

3. Cynnwys Pecyn

Gwiriwch fod yr holl eitemau yn bresennol yn y pecyn:

• M-Wave M30HCW Cyclocomputer Unit
• Wireless Speed/Cadence Sensor
• Olwyn Magnet
• Mounting Bracket (for handlebar or stem)
• Mounting Ties/Bands
• CR2 Batteries (4 required, included)

4. Gosod

4.1. Gosod Batri

1. Open the battery compartment on the back of the cyclocomputer unit and the wireless sensor.
2. Insert the CR2 batteries, ensuring correct polarity (+/-).
3. Caewch yr adrannau batri yn ddiogel.

4.2. Mounting the Cyclocomputer

The M-Wave M30HCW features tool-free mounting for quick installation.

1. Attach the mounting bracket to your bicycle's handlebar or stem using the provided ties or bands. Ensure it is firmly secured and positioned for easy viewing.
2. Slide the cyclocomputer unit onto the mounting bracket until it clicks into place.

4.3. Mounting the Wireless Sensor and Magnet

1. Attach the wireless sensor to the front fork of your bicycle, ensuring it is aligned with the wheel spokes.
2. Mount the wheel magnet to a spoke on the front wheel. Position the magnet so it passes within 5mm of the sensor as the wheel rotates.
3. Ensure the sensor and magnet are securely fastened and do not interfere with wheel rotation or braking.

4.4. Cyfluniad Cychwynnol

After battery installation, the computer will typically prompt you for initial settings. Use the buttons (usually MODE and SET) to navigate and confirm selections.

• Unedau: Select between metric (km/h, km) and imperial (mph, miles) units.
• Maint Olwyn: Input your wheel circumference in millimeters (mm). Refer to your bicycle tire for this value or measure it accurately. This is crucial for accurate speed and distance readings.
• Amser: Set the current time (24-hour or 12-hour format).
• Pwysau: Enter your body weight for calorie calculation.

5. Cyfarwyddiadau Gweithredu

The M-Wave M30HCW features an LED backlit display for easy reading and is operated via buttons, typically located on the front or bottom of the unit.

5.1. Swyddogaethau Sylfaenol

The computer automatically powers on and off. When you start cycling, it will activate and begin recording data. When stationary, it will enter a power-saving mode.

• Cyflymder Presennol: Displays your real-time cycling speed.
• Cyflymder Cyfartalog: Shows the average speed for your current ride.
• Cyflymder Uchaf: Yn cofnodi'r cyflymder uchaf a gyflawnwyd yn ystod eich taith.
• Pellter y Daith: Measures the distance covered in the current ride.
• Odomedr: Tracks the total accumulated distance.
• Amser Taith: Records the duration of your current ride.
• Diweddeb: Measures your pedaling revolutions per minute (RPM).
• Altimedr: Provides altitude measurements for climb tracking.
• Heart Rate Monitor/Alarm: (If applicable, requires compatible HR sensor, not included with base unit) Monitors heart rate and can alert if thresholds are exceeded.
• Defnydd Calorïau: Estimates calories burned based on ride data and user weight.
• Thermomedr: Displays ambient temperature.

5.2. Gweithrediad Botwm

Typically, the computer will have one or two buttons for navigation and selection:

• Botwm MODE: Press briefly to cycle through different display modes (e.g., speed, distance, time). Press and hold to enter settings or reset trip data.
• Botwm SET: Used to confirm selections or adjust values within settings menus.

Refer to the on-screen prompts for specific button functions during setup and operation.

6. cynnal

• Glanhau: Wipe the computer unit and sensor with a soft, damp brethyn. Peidiwch â defnyddio glanhawyr neu doddyddion sgraffiniol.
• Gwrthiant Dŵr: The device is IP44 rated, protecting it from splashing water. Avoid high-pressure washing or submerging the unit.
• Amnewid Batri: Replace batteries when the low battery indicator appears on the display. Ensure proper battery type and polarity.
• Storio: If storing the bicycle for an extended period, remove the batteries from the computer and sensor to prevent leakage.

7. Datrys Problemau

8. manylebau

9. Gwarant a Chefnogaeth

For warranty information and technical support, please refer to the documentation provided with your purchase or contact M-Wave customer service directly. Keep your proof of purchase for any warranty claims.