SONGMICS Office Chair OBG57B User Manual

Rhagymadrodd

This manual provides essential information for the safe and efficient use of your SONGMICS Office Chair OBG57B. Please read these instructions carefully before assembly and use, and retain them for future reference.

Gwybodaeth Diogelwch

To ensure your safety and prevent damage to the product, please observe the following guidelines:

• Cynhwysedd Llwyth Uchaf: The chair is designed to support a maximum weight of 150 kg (330 lbs). Do not exceed this limit.
• Sefydlogrwydd: Ensure all components are securely fastened before use. Do not stand on the chair.
• Cynulliad: Follow all assembly instructions precisely. Use only the provided tools and hardware.
• Plant: Keep children away from the assembly area. This product contains small parts that could be a choking hazard.
• Cynnal a Chadw: Gwiriwch yr holl sgriwiau a chysylltiadau yn rheolaidd i sicrhau eu bod yn parhau i fod yn dynn.

Cynnwys Pecyn

Cyn dechrau cydosod, gwiriwch fod yr holl rannau a restrir isod yn bresennol ac yn ddi-ddifrod. Os oes unrhyw rannau ar goll neu wedi'u difrodi, cysylltwch â chymorth cwsmeriaid.

• Cynhalydd cefn
• Clustog Sedd
• Arfau (2)
• Silindr Codi Nwy
• Sylfaen Seren
• casters (5)
• Plât Mecanwaith
• Screws and Allen Key
• Additional spare screws and casters

Gosod a Chynulliad

Assembly is straightforward and requires minimal tools, which are included. Please follow these general steps:

1. Atodwch y Castwyr i'r Sylfaen Seren: Mewnosodwch bob un o'r pum caster i'r tyllau ar ddiwedd breichiau sylfaen seren nes eu bod yn clicio'n ddiogel yn eu lle.
2. Mewnosod Codiad Nwy: Place the gas lift cylinder into the central hole of the star base.
3. Atodwch y Plât Mecanwaith i'r Sedd: Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Secure it with the provided screws. Ensure the front of the mechanism plate faces the front of the seat.
4. Atodwch Armrests: Secure the armrests to both the seat cushion and the backrest using the designated screws. Do not overtighten initially.
5. Cysylltu'r Sedd â'r Lifft Nwy: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the central hole of the mechanism plate aligns with the top of the gas lift.
6. Tynhau Terfynol: Once all parts are loosely assembled, gently tighten all screws. Do not overtighten to avoid stripping threads.

Cyfarwyddiadau Gweithredu

Your SONGMICS Office Chair OBG57B offers several adjustable features for personalized comfort:

1. Addasiad Uchder Sedd

To adjust the seat height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up slightly and pull the lever up. Release the lever at your desired height.

• Ystod Addasadwy: Approximately 51 cm to 61 cm (20.1 inches to 24 inches) from the floor.

2. Tilt Function and Lock

The chair features a tilt mechanism allowing the backrest and seat to recline together. To activate the tilt, pull the same lever (used for height adjustment) outwards. To lock the chair in an upright position, push the lever inwards.

The tension of the tilt mechanism can be adjusted by rotating the round knob located under the front of the seat. Turn clockwise to increase tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).

3. Swyddogaeth Troelli

Mae'r gadair wedi'i chynllunio i droi 360 gradd, gan ganiatáu symudiad a mynediad hawdd i wahanol rannau o'ch gweithle heb orfod ail-leoli'r gadair gyfan.

4. casters

The five high-quality polyurethane casters allow for smooth and quiet movement across various floor surfaces, protecting your flooring from scratches.

Cynnal a Chadw a Gofal

Proper care will extend the life and appearance of your office chair:

• Glanhau: The high-quality PU surface is easy to clean. For general cleaning, wipe with a soft, damp cloth. For spills or stains, spot clean immediately with a mild soap solution and a soft cloth. Avoid harsh chemicals or abrasive cleaners.
• Arolygiad: Periodically check all screws, bolts, and connections to ensure they are tight. Retighten if necessary.
• Casters: Cadwch y castell yn rhydd o wallt a malurion i sicrhau rholio llyfn.
• Osgoi golau haul uniongyrchol: Prolonged exposure to direct sunlight can cause the PU material to fade or crack.

Datrys problemau

Os byddwch chi'n dod ar draws unrhyw broblemau gyda'ch cadair, cyfeiriwch at y problemau a'r atebion cyffredin canlynol:

• Sgrechiadau Cadair:
  • Check and tighten all screws, especially those connecting the mechanism plate to the seat and the armrests.
  • Apply a small amount of silicone lubricant to moving parts if the squeaking persists.
• Nid yw'r Gadair yn Addasu Uchder:
  • Gwnewch yn siŵr bod y lifer addasu uchder wedi'i ymgysylltu'n llawn.
  • Verify the gas lift cylinder is correctly seated in the star base and mechanism plate. If the gas lift is faulty, it may need replacement.
• Casters Do Not Roll Smoothly:
  • Remove any hair, dust, or debris that may be caught in the casters.
  • Ensure casters are fully inserted into the star base.
• Mae'r Gadair yn Teimlo'n Ansefydlog:
  • Gwiriwch fod yr holl sgriwiau wedi'u tynhau'n ddiogel.
  • Ensure the star base is not damaged and the casters are properly installed.

If these solutions do not resolve the issue, please contact SONGMICS customer support for further assistance.

Manylebau