JBL Cinema SB250 Soundbar System

Cynnyrch Drosview

The JBL Cinema SB250 is a 2.1 channel wireless Bluetooth soundbar system designed to deliver cinematic virtual surround sound. It features a sleek soundbar and a compact, powerful wireless subwoofer, providing an immersive audio experience for your home entertainment.

Key features include Dolby Digital and Harman Surround for rich audio, JBL SoundShift for seamless switching between TV and mobile device audio, and Harman Volume to maintain consistent sound levels. The system is designed to work with your existing TV remote for simplified control.

Figure 1: The JBL Cinema SB250 Soundbar and its accompanying Wireless Subwoofer.

Cydrannau wedi'u Cynnwys:

• 1 JBL Cinema SB250 Soundbar
• 1 JBL Wireless Subwoofer
• 1 Rheoli o Bell
• 1 3.5mm Analog Cable
• 1 Cebl Optegol
• 1 Canllaw Cychwyn Cyflym
• 1 Cerdyn Gwarant
• 1 Taflen Diogelwch

Figure 2: All cables and accessories included with the JBL Cinema SB250 system.

Canllaw Gosod

1. Lleoliad

Place the soundbar directly in front of your TV, centered. Ensure there are no obstructions in front of the soundbar's speakers. The wireless subwoofer can be placed anywhere in the room, ideally near a wall for optimal bass response. Avoid placing it directly against a wall or in a corner if the bass becomes too boomy.

2. Cysylltiadau

Cysylltwch y bar sain â'ch teledu gan ddefnyddio un o'r dulliau canlynol:

• Optical Digital Input (Recommended): Connect the supplied optical cable from the soundbar's OPTICAL IN port to your TV's optical digital output port. This provides the best audio quality.
• Mewnbwn Sain Analog: Connect the supplied 3.5mm analog cable from the soundbar's AUX IN port to your TV's audio output (headphone jack or RCA stereo output using an adapter, not supplied).

Sicrhewch fod pob cebl wedi'i gysylltu'n ddiogel.

Ffigur 3: Cefn view of the soundbar and subwoofer, highlighting connection ports.

3. Cysylltiad Pwer

Connect the power cords to the soundbar and the wireless subwoofer, then plug them into active power outlets. The soundbar and subwoofer will automatically power on.

4. Paru Is-woofer Di-wifr

The soundbar and wireless subwoofer are pre-paired at the factory. If the subwoofer does not automatically connect (indicated by a solid blue LED on the subwoofer), you may need to manually pair them:

1. Press the 'Pairing' button on the rear of the subwoofer. The LED will flash blue.
2. With the soundbar powered on, press and hold the 'Bluetooth' button on the soundbar for 5 seconds. The soundbar's Bluetooth LED will flash.
3. Once connected, the LEDs on both the soundbar and subwoofer will turn solid blue.

Figure 4: Rear panel of the wireless subwoofer, showing the pairing button.

Gweithrediad

Soundbar Controls:

Figure 5: Top panel controls of the JBL Cinema SB250 Soundbar.

• Botwm Pŵer: Press to turn the soundbar on or off.
• Botwm Ffynhonnell: Press to cycle through input sources (Optical, Analog, Bluetooth).
• Botymau Cyfaint +/-: Addaswch lefel y gyfrol meistr.
• Botwm Bluetooth: Pwyswch i fynd i mewn i fodd paru Bluetooth.

Rheolaeth Anghysbell:

The included remote control provides full functionality for the soundbar. Additionally, the JBL Cinema SB250 can learn volume control commands from your existing TV remote, simplifying your home cinema experience. Refer to the Quick Start Guide for instructions on programming your TV remote.

Ffrydio Bluetooth:

To stream audio from a Bluetooth-enabled device:

1. Press the Bluetooth button on the soundbar or remote. The Bluetooth LED will flash.
2. On your device, enable Bluetooth and select "JBL Cinema SB250" from the list of available devices.
3. Once connected, the Bluetooth LED on the soundbar will turn solid blue.

JBL SoundShift:

JBL SoundShift allows you to seamlessly switch between audio from your TV and audio from a connected Bluetooth mobile device. When a Bluetooth audio signal is detected, the soundbar will automatically switch to the Bluetooth source. When the Bluetooth audio stops, it will revert to the TV audio.

Cyfrol Harman:

Harman Volume technology helps to maintain consistent sound levels, preventing sudden loud commercials or volume spikes when switching content. This feature is enabled by default.

Wall/Table EQ Switch:

The soundbar features a switch on its rear panel to optimize audio performance based on its placement (wall-mounted or tabletop). Adjust this switch according to your installation type for the best sound quality.

Cynnal a Chadw a Gofal

• Glanhau: Defnyddiwch frethyn meddal, sych i lanhau arwynebau'r bar sain a'r is-woofer. Peidiwch â defnyddio glanhawyr hylif na aerosolau, gan y gallant niweidio'r gorffeniad neu'r cydrannau mewnol.
• Awyru: Sicrhewch awyru digonol o amgylch y bar sain a'r is-woofer. Peidiwch â rhwystro unrhyw agoriadau awyru.
• Storio: Os ydych chi'n storio'r uned am gyfnod hir, datgysylltwch hi o'r pŵer a'i storio mewn lle oer, sych i ffwrdd o olau haul uniongyrchol a thymheredd eithafol.

Datrys problemau

Manylebau Technegol

Gwarant a Chefnogaeth

Daw'r JBL Cinema SB250 gyda Gwarant gwneuthurwr 1 flynedd o ddyddiad y pryniant. Cadwch eich derbynneb prynu ar gyfer hawliadau gwarant.

For free demo/installation assistance and customer support, please contact:

Cymorth i Gwsmeriaid: 18001020525

Manufacturer: Harman International Industries, Inc