Stack-On QAS-1512-B Quick Access Safe with Biometric Lock User Manual

Rhagymadrodd

The Stack-On QAS-1512-B Quick Access Safe provides secure storage with rapid access through its biometric locking system. Designed for convenience and security, this safe allows for quick retrieval of contents using a registered fingerprint. It also includes a backup key for alternative access. The interior is foam-padded to protect valuables, and the safe is equipped with pre-drilled holes and hardware for secure mounting to a floor, wall, or shelf.

Ffigur 1: Blaen view of the Stack-On QAS-1512-B Quick Access Safe.

Gwybodaeth Diogelwch

• Always keep the backup keys in a secure location away from the safe and out of reach of children.
• Do not store the backup keys inside the safe.
• Gwnewch yn siŵr bod y sêff wedi'i osod yn ddiogel i atal ei symud heb awdurdod.
• Keep the safe closed and locked when not in use.
• This safe is designed to deter theft and provide quick access to contents; it is not fireproof or waterproof.
• Do not allow children to play with or around the safe.

Cynnwys Pecyn

Verify that all items are present before proceeding with installation and setup:

• Stack-On QAS-1512-B Quick Access Safe
• Bysellau Wrth Gefn (2)
• Batris AA (4)
• Silff Symudadwy
• Fastening Hardware (for mounting)
• Llawlyfr Defnyddiwr (y ddogfen hon)

Ffigur 2: Tu mewn view showing the removable shelf and foam-padded interior.

Gosod

1. Gosod Batri

1. Locate the battery compartment, typically on the inside of the safe door or back panel.
2. Mewnosodwch 4 batris AA, gan sicrhau polaredd cywir (+/-).
3. Caewch y clawr adran batri yn ddiogel.

2. Gosod y Sêff

The safe features pre-drilled holes for secure mounting to a floor, wall, or shelf. Use the provided fastening hardware.

1. Choose a secure and discreet location for mounting.
2. Mark the drilling points through the pre-drilled holes on the safe.
3. Drilio tyllau peilot i'r wyneb mowntio.
4. Align the safe with the pilot holes and secure it using the fastening hardware.
5. Gwnewch yn siŵr bod y sêff wedi'i gysylltu'n gadarn ac na ellir ei dynnu'n hawdd.

Ffigur 3: Example of the safe mounted securely inside a closet.

3. Initial Fingerprint Enrollment

Pwysig: When you first receive your safe, it is in a factory default state where any fingerprint can open it. For security, you rhaid record at least one fingerprint. Failure to do so will compromise the safe's security.

The safe can store up to 20 different fingerprints. For optimal performance, each user should register only one thumb or index finger.

1. Open the safe using the provided backup key.
2. Locate the reset button on the inside of the safe.
3. Press and release the reset button. You will hear two beeps, see two flashes of blue light, and the scanner will turn blue.
4. Place your chosen finger on the scanner until the safe beeps once and a green light flashes.
5. Immediately place the yr un finger on the scanner for a second time until there is one beep and a green light flash.
6. Gosodwch y yr un finger on the scanner for a third and final time, holding it in the same position until there are two beeps and two green light flashes.
7. Your fingerprint is now recorded. Test the registered fingerprint to ensure it opens the safe.

Ffigur 4: Uchaf view highlighting the biometric scanner.

For a visual guide on fingerprint enrollment, please refer to the official product video below:

Cyfarwyddiadau Gweithredu

Agor gydag Olion Bysedd

1. Place a registered finger on the biometric scanner.
2. The safe will beep and the light will turn green, indicating successful recognition.
3. The safe door will automatically open.

Opening with Backup Key

1. Locate the keyhole, usually concealed near the biometric scanner.
2. Insert the backup key and turn it to unlock the safe.
3. Open the safe door manually.

Ychwanegu Olion Bysedd Ychwanegol

To add more fingerprints (up to 20 total), repeat the "Initial Fingerprint Enrollment" steps for each new finger or user.

Deleting All Fingerprints

To delete all stored fingerprints and reset the safe to its factory default (any fingerprint opens), press and hold the reset button for approximately 5 seconds until you hear a long beep and the lights flash. All previously registered fingerprints will be erased.

Cynnal a chadw

• Amnewid Batri: Replace all 4 AA batteries annually or when the low battery indicator (if present) illuminates. Use only new, high-quality alkaline batteries.
• Glanhau: Sychwch du allan y sêff gyda lliain meddal, damp cloth. Do not use abrasive cleaners or solvents. Keep the biometric scanner clean and free of dirt or oils for optimal performance.
• Storio Allweddi: Periodically check the location of your backup keys to ensure they are secure and accessible in case of battery failure or biometric system issues.

Datrys problemau

Manylebau

Gwarant a Chefnogaeth

Am wybodaeth am warant neu gymorth technegol, cyfeiriwch at y ddogfennaeth sydd wedi'i chynnwys gyda'ch pryniant neu ewch i wefan swyddogol Stack-On websafle. Cadwch eich derbynneb prynu fel prawf o brynu ar gyfer hawliadau gwarant.

For further assistance, you may contact Stack-On customer service directly. Contact details are typically available on the manufacturer's websafle neu yn y pecyn cynnyrch.