Rhagymadrodd
The Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock is designed to provide accurate time, indoor temperature, and convenient alarm functions. Its radio-controlled feature automatically synchronizes the time, ensuring precision. The unique projection feature allows you to view the time on your ceiling or wall, enhancing usability in low-light conditions.
Nodweddion Allweddol:
- Dual Alarm (Weekday/Daily alarm options)
- Arddangosfa Tymheredd Dan Do.
- Time Projection onto ceiling or wall
- LED Backlight for LCD display
- Atomic Clock Synchronization for precise timekeeping
- Swyddogaeth Ailatgoffa
Cynnwys Pecyn
Gwiriwch fod yr eitemau canlynol wedi'u cynnwys yn eich pecyn:
- Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock unit
- Addasydd Pwer AC
- Batris AAA (2x)
- Llawlyfr Cyfarwyddiadau (y ddogfen hon)
Cynnyrch Drosview
Ymgyfarwyddwch â phrif gydrannau a rheolyddion eich cloc larwm.
Delwedd: Blaen view of the Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock. The image displays the clock's main body, featuring a digital LCD screen that shows time and temperature. A projection lens is visible on the top left side, designed to project the time. The clock has a clean, white finish.
Panel blaen:
- Arddangosfa LCD: Shows current time, indoor temperature, and alarm status.
- Lens Tafluniad: Projects time onto a surface.
- Botwm SNOOZE/GOLEUO: Activates snooze during alarm, illuminates backlight, or temporarily activates projection.
Rear/Side Panel:
- Botwm MODE: Toggles display modes and enters setting menus.
- Botymau I FYNY/I LAWR: Adjust values during settings, manually activate atomic time search.
- Botymau ALARM 1/2: Select and set Alarm 1 or Alarm 2.
- PROJECTION ON/OFF Switch: Controls continuous projection.
- PROJECTION ROTATION Button: Rotates projected image 180 degrees.
- Botwm AILOSOD: Resets the unit to factory defaults.
- Adran Batri: Holds backup batteries.
- DC YN Jac: Yn cysylltu â'r addasydd pŵer AC.
Gosod
1. Gosod Batri
- Agorwch glawr adran y batri ar gefn yr uned.
- Insert two (2) AAA batteries, observing the correct polarity (+ and -).
- Close the battery compartment cover. These batteries provide backup power during outages.
2. Connect AC Power Adapter
- Plug the AC power adapter into the DC IN jack on the back of the clock.
- Plug the adapter into a standard wall outlet. The clock will power on, and the LCD display will activate. Continuous projection requires AC power.
3. Atomic Clock Synchronization
Upon initial power-up, the clock will automatically attempt to synchronize with the atomic clock signal. This process may take several minutes to several hours, depending on your location and signal strength. Place the clock near a window for best reception.
- A signal icon will appear on the LCD when synchronization is successful.
- To manually initiate a signal search, press and hold the UP botwm am 3 eiliad.
4. Setting Time Zone
After successful atomic synchronization, you may need to set your local time zone.
- Pwyswch a dal y MODD botwm am 3 eiliad i fynd i mewn i'r modd gosod amser.
- Gwasgwch y MODD button repeatedly until the Time Zone setting flashes.
- Defnyddiwch y UP or I LAWR buttons to select your desired time zone (e.g., EST, CST, MST, PST).
- Gwasgwch MODD to confirm and exit, or wait 30 seconds for automatic exit.
Cyfarwyddiadau Gweithredu
Manual Time and Date Setting (If Atomic Sync Fails)
- Pwyswch a dal y MODD button for 3 seconds. The hour digit will flash.
- Defnyddiwch y UP or I LAWR botymau i addasu'r awr.
- Gwasgwch MODD to confirm and move to the next setting (minutes, year, month, day, 12/24 hour format, Daylight Saving Time (DST) ON/OFF).
- Repeat steps 2 and 3 until all settings are adjusted.
- Gwasgwch MODD to exit, or wait 30 seconds for automatic exit.
Setting Alarms (Alarm 1 and Alarm 2)
The clock features two independent alarms (Alarm 1 and Alarm 2).
- Gwasgwch y LARWM 1 or LARWM 2 botwm unwaith i arddangos yr amser larwm cyfredol.
- Press and hold the respective ALARM button for 3 seconds. The alarm hour will flash.
- Defnyddiwch y UP or I LAWR botymau i addasu'r awr larwm.
- Gwasgwch y ALARM button to confirm and move to alarm minutes.
- Adjust alarm minutes using UP or I LAWR.
- Gwasgwch y ALARM button to confirm and move to alarm type (Daily or Weekday).
- Adjust alarm type using UP or I LAWR.
- Gwasgwch y ALARM button to confirm and exit, or wait 30 seconds for automatic exit.
To activate or deactivate an alarm, press the LARWM 1 or LARWM 2 button once. An alarm icon will appear on the LCD when active.
Swyddogaeth Ailatgoffa
Pan fydd larwm yn seinio, pwyswch y SNOOZE / GOLAU button to temporarily silence the alarm for approximately 8 minutes. The alarm will sound again after the snooze period. To stop the alarm completely, press any other button.
Rhagamcaniad Amser
- Continuous Projection: Llithro'r PROSIECT AR / ODDI newid i ON. The time will be continuously projected. This feature requires the AC power adapter to be connected.
- Temporary Projection: If continuous projection is off, press the SNOOZE / GOLAU button to activate projection for approximately 15 seconds.
- Projection Orientation: Gwasgwch y ROTATION PROSIECT button to flip the image 180 degrees, ensuring it is displayed right-side up on your chosen surface.
- Addasu Ongl Tafluniad: The projection lens can be manually tilted to adjust the projection angle on your ceiling or wall.
Backlight LED
Gwasgwch y SNOOZE / GOLAU button to illuminate the LCD display backlight for approximately 15 seconds.
Cynnal a chadw
Glanhau'r Uned
Wipe the clock with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the unit. Ensure the unit is unplugged from the AC power before cleaning.
Amnewid Batri
When the backup batteries are low, the display may dim or settings may be lost during power outages. Replace the two (2) AAA batteries in the battery compartment, observing correct polarity.
Datrys problemau
| Problem | Ateb |
|---|---|
| Mae arddangosfa'r cloc yn wag neu'n dywyll. | Ensure the AC power adapter is securely connected to both the clock and a working wall outlet. Check if backup batteries are installed correctly and are not depleted. |
| Atomic time synchronization fails or is inaccurate. | Place the clock near a window, away from electronic devices that may cause interference. Manually initiate a signal search by holding the UP button. If synchronization consistently fails, manually set the time and date. |
| Time projection is not visible or is dim. | Ensure the AC power adapter is connected for continuous projection. Check the PROSIECT AR / ODDI switch. Adjust the projection lens angle. Ensure the room is sufficiently dark for optimal visibility. |
| Projected time is upside down or backwards. | Gwasgwch y ROTATION PROSIECT button to flip the image 180 degrees. Adjust the physical orientation of the clock if needed. |
| Nid yw'r larwm yn canu. | Ensure the alarm is activated (alarm icon visible on LCD). Verify the alarm time is set correctly. Check if the volume is not set to minimum (if applicable, though this model doesn't specify volume control). |
| Snooze/Light button only activates backlight for 15 seconds, not 5 minutes. | The backlight duration is fixed at approximately 15 seconds for temporary illumination. The 5-minute duration mentioned in some older documentation may not apply to this specific model. |
Manylebau
| Nodwedd | Manylyn |
|---|---|
| Model | RM338PA |
| Dimensiynau (LxWxH) | 4.25" x 1.02" x 3.03" (10.8 cm x 2.6 cm x 7.7 cm) |
| Pwysau | 0.24 pwys (109 g) |
| Ystod Tymheredd Dan Do. | -5°C i 50°C (23°F i 122°F) |
| Cywirdeb Tymheredd | 0°C to 40°C: ±1°C (±2°F); 40°C to 0°C: ±2°C (±4°F) |
| Datrysiad Tymheredd | 0.1°C (0.2°F) |
| Cyflenwad Pŵer | AC Power Adapter (included), 2 x UM-4 (AAA) 1.5V batteries (for backup) |
| Math Arddangos | Digital LCD with LED Backlight |
| Nodweddion Arbennig | Atomic Time, Time Projection, Dual Alarm, Snooze, Indoor Temperature |
Gwybodaeth Gwarant
Oregon Scientific products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Oregon Scientific websafle. Cadwch eich derbynneb prynu fel prawf o brynu.
Cefnogaeth i Gwsmeriaid
If you encounter any issues or have questions regarding your Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock, please visit the official Oregon Scientific support website or contact their customer service department for assistance. Contact information can typically be found on the manufacturer's websafle neu yn y pecyn cynnyrch.