Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) Instruction Manual

Rhagymadrodd

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E). Please read all instructions carefully before beginning installation to ensure correct assembly and to prevent damage or injury. Keep this manual for future reference.

Cynnwys y Pecyn:

• Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount
• Pecyn Caledwedd Mowntio (sgriwiau, angorau, golchwyr amrywiol)
• High Speed HDMI Cable (1080p 1.4v)
• 6-inch Tri-axis Spirit Level
• Llawlyfr Cyfarwyddiadau

Ffigur 1: Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) components, including the main mount assembly, VESA plate, and accessories like the spirit level and HDMI cable.

Gwybodaeth Ddiogelwch Bwysig

WARNING: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty.

• Do not install this product on walls that are not structurally sound. Ensure the mounting surface can support the combined weight of the mount and your television.
• Always use a stud finder to locate wood studs or ensure you are mounting into solid concrete/brick.
• Peidiwch â rhagori ar y capasiti llwyth uchaf o 36.2kg (80lbs).
• Mae'r cynnyrch hwn wedi'i gynllunio ar gyfer defnydd dan do yn unig.
• Ensure all screws are securely tightened, but do not overtighten.
• Cadwch blant ac anifeiliaid anwes i ffwrdd yn ystod gosod.
• Os ydych chi'n ansicr ynghylch unrhyw ran o'r broses osod, ymgynghorwch â gweithiwr proffesiynol cymwys.

Manylebau

Ffigur 2: Key specifications of the Invision HDTV-E mount, including load capacity (36.2kg), minimum wall profile (55mm), and maximum extension (500mm).

Gosod a Gosod

1. Rhestr Wirio Cyn Gosod

• Verify VESA Compatibility: Check the back of your TV for four mounting holes. Measure the horizontal and vertical distance between these holes. This mount supports VESA patterns from 100x100mm to 400x400mm. Note: Not suitable for 75x75mm VESA.
• Math o Wal: Determine if your wall is wood stud, solid concrete, or brick. Different mounting hardware is required.
• Offer Angenrheidiol: Pencil, drill, stud finder (for wood studs), level (included), measuring tape, socket wrench, screwdriver.
• Gwiriad Pwysau: Ensure your TV's weight does not exceed 36.2kg (80lbs).

Ffigur 3: Guide to checking VESA compatibility. Measure the distance between mounting holes to determine your TV's VESA pattern. The image illustrates how to measure width and height for VESA standards.

2. Attaching the TV Brackets to Your Television

1. Rhowch eich teledu wyneb i lawr yn ofalus ar arwyneb meddal, glân i atal y sgrin rhag cael ei difrodi.
2. Identify the correct screws (M4, M6, or M8) from the hardware kit that fit your TV's mounting holes. Use washers if necessary.
3. Attach the two vertical TV brackets to the back of your television using the selected screws. Ensure they are securely fastened but do not overtighten. The brackets should be centered horizontally on the TV.

3. Mounting the Wall Plate to the Wall

1. Determine Mounting Height: Decide on the desired height for the top of your TV. Mark this on the wall.
2. Locate Studs (for wood stud walls): Use a stud finder to locate the center of two adjacent wood studs. Mark these locations.
3. Position Wall Plate: Hold the wall plate against the wall at the desired height, aligning it with the marked stud centers. Use the included spirit level to ensure it is perfectly horizontal. Mark the drill holes.
4. Tyllau Peilot Drilio:
   • For wood studs: Drill pilot holes using a 5.5mm (7/32 inch) drill bit to a depth of 60mm (2.36 inches).
   • For solid concrete/brick: Drill pilot holes using a 10mm (3/8 inch) drill bit to a depth of 70mm (2.75 inches). Insert concrete anchors into the holes.
5. Secure Wall Plate: Attach the wall plate to the wall using the lag bolts and washers provided. Tighten all bolts firmly.

4. Hanging the Television

1. Gyda chymorth, codwch y teledu yn ofalus gyda'r cromfachau sydd ynghlwm.
2. Bachynwch y bracedi teledu ar y plât wal. Gwnewch yn siŵr bod y teledu wedi'i osod yn ddiogel ar y plât wal.
3. Engage the safety locking screws or mechanisms on the bottom of the TV brackets to prevent accidental dislodging.

Cyfarwyddiadau Gweithredu

The Invision HDTV-E mount offers flexible viewing options with its tilt and swivel capabilities.

Ffigur 4: The mount's design allows for extensive swivel and tilt adjustments, providing optimal viewing angles from various positions in a room.

Addasu'r Swivel

Gently grasp the sides of your television and carefully pull it away from the wall. You can then pivot the TV left or right to achieve your desired viewing angle. The mount allows for a wide range of swivel motion, up to 500mm (19.7 inches) extension from the wall.

Addasu Tilt

To adjust the vertical tilt, gently push the top or bottom of the television forward or backward. The mount supports a tilt angle of 5 to 8 degrees. The lockable tilt mechanism ensures the TV stays at your chosen angle.

Rheoli Ceblau

The mount features integrated cable management covers on the arms. Route your cables (including the included HDMI cable) through these covers to keep them organized and out of sight, ensuring a clean installation.

Ffigur 5: Manwl view of the mount's cable management system and the lockable tilt mechanism, designed for a tidy and secure setup.

Cynnal a chadw

• Arolygiad Rheolaidd: Periodically check all mounting screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause them to loosen slightly.
• Glanhau: Glanhewch y mowntiad gyda lliain meddal, sych. Osgowch lanhawyr sgraffiniol neu doddyddion a allai niweidio'r gorffeniad.
• Iro: The moving parts of the mount are designed for smooth operation and generally do not require lubrication. If you notice any stiffness, contact customer support.
• Terfyn pwysau: Never exceed the maximum weight capacity of 36.2kg (80lbs).

Datrys problemau

Gwybodaeth Gwarant

The Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) comes with a Gwarant Cynnyrch 25 Flynedd. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

For warranty claims or further details, please contact Invision customer support.

Cefnogaeth i Gwsmeriaid

If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Invision Technology (UK) Ltd. customer support.

Gwneuthurwr: Invision Technology (UK) Ltd

Rhif Adnabod Masnach Fyd-eang (GTIN): 05060264551392

Please refer to the product packaging or the official Invision websafle am y wybodaeth gyswllt ddiweddaraf.

Ffigur 6: Product packaging displaying manufacturer information and contact details for Invision Technology (UK) Ltd.