Argox AS8520

Argox AS8520 Barcode Scanner User Manual

1. Rhagymadrodd

The Argox AS8520 is a high-performance cordless imager designed for efficient barcode scanning. It features advanced wireless communication technology, allowing for a data transmission range of up to 100 meters. Equipped with a long-lasting Li-ion battery and an IP42 sealing level, the AS8520 is built for durability and mobility across various environments, including offices, supermarkets, warehouses, and manufacturing facilities.

2. Cynnyrch Drosview

The AS8520 barcode scanner is designed for comfortable handling and robust performance. Key components include the scanning window, trigger button, and ergonomic grip.

Argox AS8520 Barcode Scanner side view

Ffigur 2.1: Ochr view of the Argox AS8520 Barcode Scanner, showing the ergonomic handle and trigger button.

Argox AS8520 Barcode Scanner front view

Ffigur 2.2: Blaen view of the Argox AS8520 Barcode Scanner, highlighting the scanning window and product labels.

3. Canllaw Gosod

3.1. Gosod a Gwefru Batri

  1. Ensure the scanner is powered off before installing or removing the battery.
  2. Locate the battery compartment on the scanner handle.
  3. Insert the Li-ion battery pack, ensuring correct polarity.
  4. Caewch yr adran batri yn ddiogel.
  5. Connect the scanner to its charging base or power adapter using the provided cable. Allow the battery to fully charge before first use.

3.2. Connecting to a Host Device

The Argox AS8520 can connect wirelessly to various host devices, including desktops, laptops, and smartphones. Refer to the separate quick start guide for specific pairing instructions for your operating system or device type.

4. Cyfarwyddiadau Gweithredu

4.1. Sganio Sylfaenol

  1. Ensure the scanner is powered on and successfully paired with your host device.
  2. Pwyntiwch y ffenestr sganio tuag at y cod bar rydych chi am ei sganio.
  3. Press and hold the trigger button. A red LED light source (630nm Visible Red LED) will illuminate the barcode.
  4. Position the scanner at an appropriate distance (the AS8520 offers superior depth of field up to 40 inches on 40-mil codes) until the barcode is successfully read. A successful scan is typically indicated by an audible beep and/or a visual indicator.
  5. Rhyddhewch y botwm sbardun.

4.2. Advanced Scanning Features

  • Rapid Scan Rate: The AS8520 provides a rapid scan rate of 450 scans/sec for efficient data capture.
  • Barcode Symbology Support: Supports GS1 Databar (RSS) and CS (Composite Symbology) barcodes.
  • Sunlight Readability: Designed to be readable under direct sunlight conditions.

5. cynnal

5.1. Glanhau'r Sganiwr

  • Ensure the scanner is powered off before cleaning.
  • Defnyddiwch frethyn meddal, di-lint yn ysgafn dampened with water or a mild cleaning solution to wipe the exterior of the scanner.
  • For the scanning window, use a lens cleaning cloth to avoid scratches.
  • Do not use abrasive cleaners, solvents, or immerse the scanner in liquid. The IP42 sealing level protects against dust and light water splashes, but not full immersion.

5.2. Gofal Batri

  • To maximize battery life, avoid fully discharging the Li-ion battery frequently.
  • Storiwch y sganiwr mewn lle oer, sych pan nad yw'n cael ei ddefnyddio am gyfnodau hir.
  • If the battery performance degrades significantly, consider replacing it with an authorized Argox replacement battery.

6. Datrys Problemau

ProblemAchos PosiblAteb
Nid yw'r sganiwr yn troi ymlaen.Mae'r batri wedi'i ryddhau neu heb ei osod yn iawn.Gwefrwch y batri. Gwnewch yn siŵr bod y batri wedi'i osod yn gywir yn ei adran.
Nid yw'r sganiwr yn darllen codau bar.Barcode is damaged, scanner is too far/close, or incorrect symbology settings.Ensure the barcode is clear. Adjust scanning distance. Check scanner programming for supported barcode types.
No data transmitted to host device.Scanner not paired or out of range.Re-pair the scanner with the host device. Ensure the scanner is within the 100-meter transmission range.
Scanner is unresponsive.Gwall meddalwedd dros dro.Perform a soft reset by powering off and then on the scanner. If issues persist, consult the manufacturer's support.

7. Manylebau Technegol

NodweddManyleb
ModelAS8520
Cyfradd Sgan450 sgan/eiliad
Ffynhonnell Golau630nm Visible Red LED
Perfformiad SganioStarting at 0.1mm (4 mil)
Dyfnder y CaeUp to 40 inches on 40-mil codes
Ystod Trosglwyddo Data100 meters (wireless)
Dyfeisiau CydnawsPenbwrdd, Gliniadur, Ffôn Clyfar
Ffynhonnell PwerBattery Powered (Li-ion battery pack)
Tymheredd Gweithredu0°C i 50°C (32°F i 122°F)
Tymheredd Storio-20°C i 70°C (-4°F i 158°F)
Lleithder10% i 90% o leithder cymharol, heb fod yn gyddwyso
Lefel GolauHyd at 70,000 lux
Current - Operating225 mA @ 4.2 VDC
Current - Standby32 mA @ 4.2 VDC
Power - Operating900 mW
Power - Standby150 mW
Reliability (Trigger)1,000,000 o weithiau
Reliability (Cable)320,000 times (90° bend)
Manyleb Gollwng1.5 metr
Sealing LevelIP42
Pwysau Eitem1.3 kg
GTIN/UPC702563636336

8. Gwarant a Chefnogaeth

For detailed warranty information, please refer to the warranty card included with your product or visit the official Argox website. For technical support, service, or replacement parts, please contact your authorized Argox reseller or Argox customer service directly.

© 2026 Argox. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.