APC Back-UPS BX1400UI User Manual

1. Rhagymadrodd

The APC Back-UPS BX1400UI is an Uninterruptible Power Supply (UPS) designed to protect your electronic equipment from power outages, surges, and spikes. Featuring Line Interactive Technology and Automatic Voltage Regulation (AVR), this unit provides reliable battery backup and surge protection for connected devices. It includes six IEC 320 C13 outlets, a USB interface for communication, and data line protection.

Ffigur 1: Blaen view of the APC Back-UPS BX1400UI.

2. Gwybodaeth Bwysig am Ddiogelwch

• Perygl Trydanol: Mae'r uned hon yn cynnwys cyfaint ucheltage components. Do not attempt to open the UPS casing, especially when connected to power. Refer all servicing to qualified personnel.
• Cysylltiad uniongyrchol: Always connect the UPS directly to a wall outlet. Do not use surge protectors, extension cords, or power strips with the UPS input.
• Awyru: Ensure adequate ventilation around the UPS. Do not block ventilation openings.
• Arogl cychwynnol: A new unit may emit a distinct odor, often described as similar to burnt plastic. This is normal and typically dissipates after a few weeks of continuous operation in a well-ventilated area. It is not indicative of a malfunction.
• Amnewid Batri: User-performed battery replacement during the warranty period will void the product warranty. Refer to the Maintenance section for details.

3. Cynnwys Pecyn

Gwiriwch fod eich pecyn yn cynnwys yr eitemau canlynol:

• APC Back-UPS BX1400UI Unit
• Two (2) IEC-C13 to IEC-C14 power cables (for connecting devices to the UPS)
• Llawlyfr Defnyddiwr (y ddogfen hon)

Nodyn: The input power cable (for connecting the UPS to the wall outlet) and the USB communication cable are typically heb ei gynnwys and must be purchased separately if needed.

4. Gosod

4.1. Unpacking and Battery Connection

1. Tynnwch yr UPS o'i becynnu yn ofalus.
2. Locate the yellow battery connector on the rear panel of the UPS. This connector is typically disconnected for safe transport.
3. Push the yellow battery connector firmly into its socket until it clicks into place. This activates the UPS battery circuits.

4.2. Cysylltu â Phwer

1. Connect the UPS to a grounded 230V AC wall outlet using an appropriate IEC-320 C14 input power cable (not included).
2. Ensure the connection is direct to the wall outlet. Do not use surge protectors or extension cords.
3. Allow the UPS to charge for at least 10 hours before connecting critical equipment to ensure full battery runtime.

4.3. Cysylltu Offer

The BX1400UI features six IEC 320 C13 outlets for connecting your devices.

• Allfeydd Wrth Gefn Batri a Diogelu rhag Ymchwydd: All six IEC-C13 outlets provide both battery backup and surge protection. Connect your computer, monitor, and other critical electronics to these outlets.
• Diogelu Llinell Ddata: The rear panel includes RJ-11 ports labeled "DSL/Modem/Fax/Phone" for protecting your telephone or DSL line from surges. These ports are not suitable for Ethernet network connections.
• Rhyngwyneb USB: Connect a USB Type B cable (not included) from the UPS to your computer for communication and to enable shutdown software functionality.

Figure 2: Rear panel connections of the APC Back-UPS BX1400UI.

5. Cyfarwyddiadau Gweithredu

5.1. Pweru Ymlaen / I ffwrdd

• I Bweru Ymlaen: Press and hold the power button on the front panel until you hear a short beep. The UPS will perform a self-test, and the 'On Line' LED will illuminate green.
• I Bweru i ffwrdd: Press and hold the power button until the UPS powers down.

5.2. Dangosyddion LED

The front panel features LED indicators to show the UPS status:

• On Line (Green LED): Indicates the UPS is operating on utility power and providing power to connected equipment.
• On Battery (Yellow LED): Indicates the UPS is operating on battery power during a power outage or brownout. A humming noise is normal during battery operation.
• Replace Battery (Red LED): Indicates the battery needs to be replaced.
• Overload (Red LED): Indicates that the connected equipment exceeds the UPS's capacity. Disconnect non-essential equipment immediately.

5.3. Cyfrol Awtomatigtage Rheoliad (AVR)

The UPS automatically corrects minor voltage fluctuations (sags and surges) without switching to battery power, thus preserving battery life. If voltage fluctuations exceed the AVR's correction range, the UPS will switch to battery power.

6. Nodweddion Allweddol

• Line Interactive Technology: Provides stable power by regulating voltage without constantly switching to battery.
• Vol Awtomatigtage Rheoliad (AVR): Corrects minor voltage fluctuations without using battery power.
• Gwneud copi wrth gefn o'r batri: Supplies power to connected equipment during outages.
• Amddiffyniad Ymchwydd: Protects connected devices from damaging power surges and spikes.
• 6 IEC 320 C13 Outlets: Standard outlets for computer equipment.
• Rhyngwyneb USB: Enables communication with a computer for monitoring and controlled shutdown.
• Diogelu Llinell Ddata: Safeguards telephone/DSL lines from surges.

7. Defnydd Meddalwedd

The APC Back-UPS BX1400UI supports USB Human Interface Device (HID) class specifications, allowing it to be recognized by most operating systems without special drivers.

7.1. APC PowerChute Personal Edition (Windows)

For advanced monitoring and management on Windows systems, download the APC PowerChute Personal Edition software from the official APC websafle. Mae'r feddalwedd hon yn caniatáu ichi:

• Monitor UPS status, power consumption, and battery charge.
• Configure automatic shutdown of your computer during extended power outages.
• Adjust UPS settings, such as alarm behavior (e.g., disable the beeper during battery operation).
• Perform self-tests to ensure proper UPS functionality.

7.2. Linux Support (apcupsd / NUT)

For Linux environments, the UPS can be managed using `apcupsd` or Network UPS Tools (NUT). These tools provide similar monitoring and shutdown capabilities. Refer to the documentation for `apcupsd` or NUT for configuration details, typically involving specifying `UPSCABLE usb` and `UPSTYPE usb` for `apcupsd`, or using the `usbhid-ups` driver for NUT.

8. cynnal

8.1. Amnewid Batri

The APC Back-UPS BX1400UI uses two 12V 7.2Ah sealed lead-acid batteries. The recommended replacement battery pack is APC RBC113.

• During Warranty: If the unit is still under its 2-year warranty, battery replacement must be performed by Schneider Electric IT (SEIT) customer service. User-performed battery replacement during the warranty period will automatically void the warranty.
• After Warranty: After the warranty period, batteries can be replaced by the user. However, due to the presence of high voltage components even when disconnected, it is highly recommended that this operation be performed by specialized personnel. If you choose to replace the batteries yourself, exercise extreme caution.
• Gweithdrefn Drosoddview (for experienced users only): Disconnect the UPS from all power sources and connected equipment. Disconnect the yellow battery connector. Remove the rear panel screws, then the front panel (which is snap-fitted), and additional screws. Carefully access the battery compartment. Note the orientation and wiring of the existing batteries (taking photos is recommended) to ensure correct installation of the new batteries.

8.2. Ailosod Torrwr Cylchdaith

In case of an overload, the UPS may trip its circuit breaker. To reset, disconnect some equipment from the UPS, then press the circuit breaker button located on the rear panel (refer to Figure 2).

9. Datrys Problemau

For more detailed troubleshooting, refer to the complete user manual available on the APC websafle.

10. manylebau

Figure 3: Typical runtime graph for APC Back-UPS 1400VA.

11. Gwarant a Chefnogaeth

11.1. Gwarant Cynnyrch

The APC Back-UPS BX1400UI comes with a Gwarant cyfyngedig 2 mlynedd o ddyddiad y pryniant. Mae'r warant hon yn cwmpasu diffygion mewn deunyddiau a chrefftwaith o dan ddefnydd arferol. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.

Pwysig: Unauthorized opening of the unit or user-performed battery replacement during the warranty period will void the warranty.

11.2. Cymorth Technegol

For technical assistance, troubleshooting, or warranty service, please contact APC by Schneider Electric customer support. Visit the official APC website for contact information specific to your region, including phone numbers and online support resources.

Online resources often include FAQs, knowledge bases, and downloadable manuals that can provide further assistance.