Progress Lighting Helm Collection One-Light 11" LED Flush Mount Instruction Manual

Rhagymadrodd

The Progress Lighting Helm Collection One-Light 11" LED Flush Mount fixture is a contemporary lighting solution designed for both ceiling and wall mounting. Featuring an acrylic diffuser with architectural details, this fixture provides efficient and stylish illumination. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new light fixture.

Gwybodaeth Ddiogelwch Bwysig

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause serious damage. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). If you are unfamiliar with electrical wiring, consult a qualified electrician.

• Datgysylltwch y pŵer wrth y prif dorrwr cylched bob amser cyn gosod neu gynnal a chadw.
• Do not install this fixture in wet locations. It is designed for indoor use only.
• Sicrhewch fod pob cysylltiad yn ddiogel ac wedi'i inswleiddio'n iawn.
• This fixture is designed for 120 Volts AC.
• Peidiwch â cheisio addasu'r gosodiad. Gall unrhyw addasiadau ddirymu'r warant a chreu perygl diogelwch.
• Mae'r ffynhonnell golau LED wedi'i hintegreiddio ac ni ellir ei newid gan y defnyddiwr.

Cynnwys Pecyn

Gwiriwch fod yr holl gydrannau yn bresennol cyn dechrau'r gosodiad:

• Helm Collection LED Flush Mount Fixture (1)
• Pecyn Caledwedd Mowntio (1)
• Taflen Gosod (1)

Gosod a Gosod

Follow these steps carefully to install your new fixture. It is recommended to have two people for installation.

Cam 1: Paratoi ar gyfer Gosod

1. Diffoddwch y pŵer wrth y torrwr cylched neu'r blwch ffiwsiau i osgoi sioc drydanol.
2. Remove the old fixture (if applicable) and disconnect all wiring.
3. Unpack the new fixture and its components. Keep all parts organized.

Cam 2: Gosodwch y Gosodiad

Delwedd: Blaen view of the 11-inch LED flush mount fixture in a brushed nickel finish, showcasing its square design and acrylic diffuser.

Image: Diagram showing the dimensions of the fixture, indicating an 11-inch width and 3-3/4 inch height.

4. Cysylltwch y braced mowntio â'r blwch cyffordd gan ddefnyddio'r sgriwiau a ddarperir. Gwnewch yn siŵr ei fod wedi'i glymu'n ddiogel.
5. Connect the fixture's wires to the corresponding house wires:
   • Connect the black wire (Live) from the fixture to the black wire from the junction box.
   • Connect the white wire (Neutral) from the fixture to the white wire from the junction box.
   • Connect the green or bare copper wire (Ground) from the fixture to the green or bare copper wire from the junction box.
   Use wire nuts to secure all connections and wrap them with electrical tape for added safety.
6. Rhowch bob gwifren yn ofalus yn y blwch cyffordd.
7. Align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the ceiling or wall.

Cam 3: Gorffen Gosod

8. Adferwch y pŵer wrth y prif dorrwr cylched.
9. Profwch y gosodiad i sicrhau ei fod yn gweithio'n iawn.

Cyfarwyddiadau Gweithredu

This LED flush mount fixture is designed for simple operation.

• Troi ymlaen / i ffwrdd: Use a standard wall switch connected to the fixture's circuit to turn the light on or off.
• pylu: This fixture is compatible with most standard dimmer switches. For optimal performance and to avoid flickering, use an LED-compatible dimmer switch. Consult your dimmer switch manufacturer's instructions for proper installation and operation.

Cynnal a chadw

Er mwyn sicrhau hirhoedledd ac ymddangosiad eich gosodiad, dilynwch y canllawiau cynnal a chadw hyn:

• Glanhau: Always turn off the power and allow the fixture to cool before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic diffuser.
• Ffynhonnell Ysgafn LED: The LED light source in this fixture is integrated and designed for long-term use. It is not user-replaceable. If the LED light source fails, the entire fixture may need to be replaced.
• Arolygiad: Periodically inspect the fixture for any loose connections or signs of wear. If any issues are found, disconnect power and consult a qualified electrician.

Datrys problemau

If you experience issues with your fixture, refer to the following common problems and solutions:

If the problem persists after trying these solutions, contact Progress Lighting customer support or a qualified electrician.

Manylebau

Gwarant a Chefnogaeth

This Progress Lighting fixture comes with a Gwarant Cyfyngedig 5 mlyneddMae'r warant hon yn gwarantu eich boddhad llwyr gyda'ch pryniant ac yn cynnwys cymorth gwasanaeth cwsmeriaid ôl-werthu proffesiynol.

For warranty claims, technical assistance, or any questions regarding your product, please contact Progress Lighting customer service.

Gallwch hefyd ymweld â'r swyddog Siop Goleuadau Progress ar Amazon am ragor o wybodaeth a chynigion cynnyrch.